Forge Home

Modules

Puppet

Resources

PuppetEcosystemPuppet CommunityUpdates

stunnel

stunnel management
Project URLRSS FeedReport issues

47,999 downloads

33,218 latest version

4.5 quality score

We run a couple of automated
scans to help you access a
module's quality. Each module is
given a score based on how well
the author has formatted their
code and documentation and
modules are also checked for
malware using VirusTotal.

Please note, the information below
is for guidance only and neither of
these methods should be considered
an endorsement by Puppet.

Support the Puppet Community by contributing to this module

You are welcome to contribute to this module by suggesting new features, currency updates, or fixes. Every contribution is valuable to help ensure that the module remains compatible with the latest Puppet versions and continues to meet community needs. Complete the following steps:

  1. Review the module’s contribution guidelines and any licenses. Ensure that your planned contribution aligns with the author’s standards and any legal requirements.
  2. Fork the repository on GitHub, make changes on a branch of your fork, and submit a pull request. The pull request must clearly document your proposed change.

For questions about updating the module, contact the module’s author.

Version information

  • 3.0.0 (latest)
  • 2.2.0
  • 2.1.2
  • 2.1.1
  • 2.0.0
  • 1.2.0
  • 1.1.1
  • 1.1.0
  • 1.0.1
  • 1.0.0
  • 0.0.2
  • 0.0.1
released Aug 27th 2016
This version is compatible with:
  • , ,

Start using this module

  • r10k or Code Manager
  • Bolt
  • Manual installation
  • Direct download

Add this module to your Puppetfile:

mod 'arusso-stunnel', '3.0.0'
Learn more about managing modules with a Puppetfile

Add this module to your Bolt project:

bolt module add arusso-stunnel
Learn more about using this module with an existing project

Manually install this module globally with Puppet module tool:

puppet module install arusso-stunnel --version 3.0.0

Direct download is not typically how you would use a Puppet module to manage your infrastructure, but you may want to download the module in order to inspect the code.

Download
Tags: ssl, security, tunnel, tls, stunnel

Documentation

arusso/stunnel — version 3.0.0 Aug 27th 2016

stunnel Module

Build Status

This is an stunnel module that provides support for multiple tunnels, each with its own initscript.

What Is stunnel?

stunnel is software that enables you to add an SSL (Secure Sockets Layer) to an existing TCP service, re-presenting the service on a different TCP port, but wrapped in SSL. stunnel also allows you to create a secure tunnel between two different computers so that a TCP service that is present on one computer appears on the other computer. This allows you to securely split onto two computers, a TCP client and server that are currently working on a single computer, without having to reconfigure either the client or the server.

stunnel is a system service that is automatically re-established if the tunnel software crashes. This makes it more robust than a manually-created SSH tunnel.

How To Generate A Certificate

In order to create a tunnel using stunnel, you must first create a digital certificate. This can be done using the shell openssl command (See http://www.openssl.org/). Here is an example:

openssl genrsa -out key.pem 2048
openssl req -new -x509 -key key.pem -out cert.pem -days 1095
    Country: AU
    State: South Australia
    Locality: Adelaide
    Organisation: Megacorp Pty Ltd
    Common Name: db.megacorp.com
    Email Address: blackhole@megacorp.com
cat key.pem cert.pem >> stunnel.pem

For more information, see https://www.digitalocean.com/community/articles/how-to-set-up-an-ssl-tunnel-using-stunnel-on-ubuntu or go crazy Googling.

How To Use Puppet To Install A Certificate File

Install the .pem file in the Files directory of your Puppet module. You can then instruct Puppet to install it anywhere you like. Here is an example of how to use Puppet to install it in the /etc/ssl/certs directory:

file { '/etc/ssl/certs/mysql_stunnel.pem':
    ensure => 'file',
    owner  => 'root',
    group  => 'root',
    mode   => 700,
    source  => 'puppet:///modules/mymodule/mysql_stunnel.pem',
    before  => Stunnel::Tun['mysql_stunnel'],
}

The before attribute ensures that the `.pem' file is present before Puppet attempts to create a tunnel.

Examples

Example: Adding an SSL Front End Within A Single Computer

This example shows how to use stunnel to take an unencrypted imap email service on TCP port 143, and present it as an encrypted imap email service on TCP port 993. The encrypted connection employs the digital certificate at /etc/certs/stunnel-imaps.pem. Here is the Puppet configuration to do this:

include stunnel
stunnel::tun { 'imaps':
  accept  => '993',
  connect => 'localhost:143',
  options => ['NO_SSLv2', 'NO_SSLv3'],
  cert    => '/etc/certs/stunnel-imaps.pem',
  client  => false,
}

Example: Tunnelling A TCP Port Between Computers

This example shows how to create an stunnel tunnel between two different computers. In particular, this example shows the common case of creating a secure connection between a MySQL client on one computer (the "client computer") and a MySQL server on a second computer (the "server computer"). However, you should be able to adapt the example to work for any non-MySQL TCP connection.

In this example, an stunnel service is installed on the client computer and also separately on the server computer. The two services communicate with each other to establish the connection from a port on the client computer to a port on the server computer.

In this example, a MySQL client connects to the MySQL server by connecting to TCP port 3306 on the client computer, just as if the MySQL server were running on the client computer. The stunnel client service on the client computer then accepts the connection and connects to TCP port 3307 on the server computer using an encrypted protocol that employs the certificate in the .pem file on the server computer. On the server computer, an stunnel server service accepts the connection to TCP port 3307 and connects to TCP port 3306 on the server computer where the MySQL database server is waiting to accept the connection. The result is that the client thinks that the server is on its computer, and the server thinks that the client is on its computer.

For the purposes of this example, we assume that the .pem certificate file has been installed at

/etc/ssl/certs/mysql_stunnel.pem

on the server computer. See an earlier section for how to generate a certificate file.

To create the tunnel, we install an stunnel client service on the client computer and an stunnel server service on the server computer. Here is the Puppet configuration to establish the stunnel service on the client computer. This configuration should only be applied to the client computer. Substitute the name, or IP address, of your server computer for db.domain.com.

include stunnel
stunnel::tun { 'mysql_stunnel':
  accept  => '3306',               # The stunnel client will listen to this port.
  connect => "db.domain.com:3307", # The stunnel client will connect to this port.
  options => ['NO_SSLv2, 'NO_SSLv3'],
  client  => true,
}

Here is the Puppet configuration to establish the stunnel service on the server computer. This configuration should only be applied to the server computer.

include stunnel
stunnel::tun { 'mysql_stunnel':
  accept  => '3307', # The stunnel server will listen to this port.
  connect => '3306', # The stunnel server will connect to this port.
                     # Note: I tried 'localhost:3306', but the 'localhost' stopped it from working.
  options => ['NO_SSLv2', 'NO_SSLv3'],
  cert    => '/etc/ssl/certs/mysql_stunnel.pem',
  client  => false,
}

In this two-computer example, the client attribute distinguishes an stunnel client installation from an stunnel server installation. This is critical because stunnel clients and servers do asymmetric things. The stunnel client on the client computer accepts MySQL connections on TCP port 3306 and creates an encrypted connection to TCP port 3307 on the server computer. The stunnel server on the server computer accepts the encrypted TCP connection on TCP port 3307 and has an encrypted conversation. It connects to local TCP port 3306 and transmits the decrypted data.

A significant advantage of using stunnel in this way is that neither the MySQL client on the client computer, nor the MySQL server on the server computer need to be configured any differently to make it work. This means that if you have a MySQL client process and a MySQL server process working on a single computer, you can use stunnel to split them over two computers without compromising security.

Multiple Clients

In the two-computer example above, the solution is presented as an stunnel client/server pair as if they are bound together. In fact, stunnel clients and servers operate independently as clients and servers. This means that you can have several different client computers, each configured with an stunnel client as shown above, and each connecting to the same server computer running an stunnel server.

Multiple Tunnels

So long as you provide a distinct resource name (mysql\_stunnel in the above examples) and use distinct TCP ports for each tunnel, you can use this Puppet package to create as many tunnels as you like, with a single computer implementing clients and servers for several different tunnels. Just declare a different stunnel::tun resource for each stunnel client or server.

stunnel::tun Attributes

accept

Specify the port (and optionally IP address) on which stunnel should listen for connections.

For an stunnel client, this will typically be the standard port for a service (e.g. 3306 for MySQL), as the tunnel is presenting the port to its user software.

For an stunnel server, this will typically be a non-standard port that is being used to construct the tunnel (3307 is often used for MySQL as it is next to 3306).

accept  => '993',                # Listen on all IPv4 addresses on port 993.
accept  => '3307',               # Listen on all IPv4 addresses on port 3307.
accept  => '192.168.0.2:3306'    # Listen only on IPv4 address 192.168.0.2 on port 3306.
accept  => ':::993',             # Listen on all IPv6 addresses on port 993.

This attribute must be specified.

This attribute controls the accept service-level option in the stunnel configuration file.

For more information on this attribute, see the stunnel documentation

cafile

Specify the location of the cafile.

cafile => '/etc/pki/tls/certs/cafile.crt'

cert

Specify the location of the certificate file. See an earlier section for how to create and install a certificate file.

cert => '/etc/ssl/certs/mysql_stunnel.pem',

This attribute controls the cert service-level option in the stunnel configuration file.

The behaviour when this parameter is not specified depends on the value of the client parameter. If client is false, the cert option will be set to look for certs that match the service name in the /etc/stunnel/certs directory. If client is true, the cert option will be omitted in the stunnel configuration file.

client

Specify whether the installation of stunnel that you are configuring is an stunnel client (true) or an stunnel server (false).

client => false,
client => true,

This attribute must be specified.

This attribute controls the client service-level option in the stunnel configuration file.

debug

Specify the level of detail that you want in the log file. Specify 0 for the least logging, and 7 for the most logging.

debug => '0',   # emerg
debug => '1',   # alert
debug => '2',   # crit
debug => '3',   # err
debug => '4',   # warning
debug => '5',   # notice
debug => '6',   # info
debug => '7',   # debug

This attribute is optional and defaults to '5'.

See also the output attribute which specifies where the logfile is.

This attribute controls the debug service-level option in the stunnel configuration file.

failover

Specify the failover strategy when using multiple back-end servers.

This attribute does not have any effect if you are not specifying multiple backend servers (as an array) as connect value.

Valid options are rr (round-robin) or prio (priority/failover, where stunnel will try to connect to the first backend, then second, etc.).

This attribute defaults to rr.

global_opts

Specify any global options that you wish to appear in the stunnel configuration file, but which this Puppet module does not support. By "global" is meant options that are specific to the stunnel installation as a whole, rather than to a specific tunnel.

global_opts => { 'setuid' => '32', 'setgid' => '104' },

This attribute is optional and defaults to the empty hash {}.

This attribute can be used to control arbitrary global options in the stunnel configuration file.

Support for assigning multiple global opts as an array is also available.

global_opts => { 'socket' => ['l:TCP_NODELAY=1', 'r:TCP_NODELAY=1'] }

For information on stunnel global options, see the stunnel documentation

install_service

Specify whether you want this stunnel Puppet module to install stunnel as a system service. Installing as a service currently places a sysvinit style initscript for each tunnel inside of /etc/init.d/stunnel-\<name>.

install_service => false,
install_service => true,

This attribute is optional and defaults to true.

This attribute controls the installation of the init-script for this tunnel. If set to true, the init script will be installed. If set to false, the init-script will be removed.

service_init_system

Specify which init system will be managing the service. If set to 'sysv' then a sysvinit style initscript for each tunnel will be placed inside of /etc/init.d/stunnel-\<name>. If set to 'systemd' then a systemd service unit config will be placed in /etc/systemd/system/stunnel-\<name>.service.

service_init_system => 'sysv',
service_init_system => 'systemd',

This attribute is optional and defaults to sysv.

options

Specify any options that you want to pass to OpenSSL.

options => ['NO_SSLv2', 'NO_SSLv3'],     # SSLv2 is turrible. See: http://osvdb.org/56387
                                         # So is SSLv3. See https://www.openssl.org/~bodo/ssl-poodle.pdf

This attribute is optional and defaults to the empty array []. For backwards compatability, a single option can be passed as a string.

For more information on this attribute, see the stunnel documentation

output

Specify the location of the stunnel log file.

output  => '/var/log/stunnel/mysql_stunnel.log',  # The stunnel log file.

This attribute is optional and defaults to either /var/log/stunnel/$name (EL based systems) or /var/log/stunnel4/$name (Debian based systems).

See also the debug attribute which specifies the level of detail in the stunnel log file.

This attribute controls the output service-level option in the stunnel configuration file.

service_opts

Specify any service-level options that you wish to appear in the stunnel configuration file, but which this Puppet module does not support. By "service-level" is meant options that are specific to a particular tunnel configuration rather than the whole stunnel installation.

service_opts => { 'protocol' => 'imap', 'TIMEOUTbusy' => '60' },

This attribute is optional and defaults to the empty hash {}.

This attribute can be used to control arbitrary service-level options in the stunnel configuration file.

For information on stunnel service-level options, see the stunnel documentation

template

Specify a Puppet ERB template for the stunnel configuration file.

template => template('megacorp_stunnel/stunnel.cfg.erb'),

This attribute is optional and defaults to a template with sensible default values.

This attribute controls the overall form of the stunnel configuration file.

timeoutidle

Specify the number of seconds that stunnel will allow a connection to be idle before terminating it.

If you set this attribute too low, then you will experience seemingly spurious disconnections that might cause havoc. If you set this attribute too high, stunnel will keep open connections to zombie clients. Given that idle connections do not use up many resources, it's probably best to err on the high side, which is why the default is 12 hours.

timeoutidle => '10',       # Ten seconds.
timeoutidle => '60',       # One minute.
timeoutidle => '3600',     # One hour.
timeoutidle => '43200',    # 12 hours.
timeoutidle => '86400',    # One day.
timeoutidle => '604800',   # One week.

This attribute is optional and defaults to 43200 (12 hours).

This attribute controls the TIMEOUTidle service-level option of the stunnel configuration file.

Service Notification

This stunnel Puppet package restarts the stunnel service if a configuration change has been made.

stunnel Generated Configuration Files

The package installs a configuration file at:

/etc/stunnel/conf.d/mysql_stunnel.conf

where mysql\_stunnel is the name of your stunnel::tun resource as above.

This Puppet package also generates an init service configuration script at:

/etc/init.d/stunnel-mysql_stunnel

where stunnel-mysql\_stunnel is the name of your stunnel::tun resource with stunnel- prepended to it.

stunnel Status

Once you've established your stunnel, you can inspect its state using the following shell commands:

/etc/init.d/stunnel-mysql_stunnel status
/etc/init.d/stunnel-mysql_stunnel start
/etc/init.d/stunnel-mysql_stunnel restart
/etc/init.d/stunnel-mysql_stunnel stop

where stunnel-mysql\_stunnel is the name of your stunnel::tun resource with stunnel- prepended to it.

Installation Errors

If you get the error:

Error: Could not install module 'arusso-stunnel' (latest: v1.0.0)
    Installation would overwrite /etc/puppet/modules/stunnel
    Currently, 'puppetlabs-stunnel' (v0.0.1) is installed to that directory
    Use `puppet module install --target-dir <DIR>` to install modules elsewhere
    Use `puppet module install --force` to install this module anyway

then uninstall the Puppet stunnel model and install the arusso one as follows:

puppet module uninstall stunnel
puppet module install arusso-stunnel

Operational Errors

If you find that the tunnel isn't working, look in the log file. If you see:

connect_blocking: s_poll_wait

then one reason why this might be happening is if your firewall is blocking the tunnel.

Certificates

stunnel is picky about the certs. You can find more information about it here in the CERTIFICATES section.

If you don't want to mess with rebuilding your cert each time the certs you base it off of get updated, you can use the stunnel::cert class to your benefit:

stunnel::cert { 'imaps':
  components => [ '/etc/pki/tls/private/private.key',
                  '/etc/pki/tls/certs/public.crt' ],
}

This will generate a cert /etc/stunnel/certs/imaps.pem that is the concatenation of the $components array provided, with a single line in between each certificate to make stunnel happiest.

Since by default, the cert parameter looks for certs that match the service name in the /etc/stunnel/certs/ directory, we can omit the cert parameter if we use the stunnel::cert class. Here's a full example:

include stunnel
stunnel::tun { 'imaps':
  accept   => '993',
  connect  => '143',
  options  => ['NO_SSLv2', 'NO_SSLv3'],
}

stunnel::cert { 'imaps':
  components => [ '/etc/pki/tls/certs/public-cert.crt',
                  '/etc/pki/tls/private/private.key' ],
}

References

License

See LICENSE file

Copyright

Copyright © 2016 The Regents of the University of California

Contributors:

  • Yann Vigara
  • Ross Williams
  • John Cooper
  • Francois Gouteroux
  • Stephen Hoekstra
  • mjs510
  • Olivier Fontannaud

Contact

Aaron Russo arusso@berkeley.edu

Support

Please log tickets and issues at the Projects site