Forge Home

ptpd

Manages the Precision Time Procotol software, ptpd.

6,352 downloads

6,352 latest version

3.8 quality score

We run a couple of automated
scans to help you access a
module's quality. Each module is
given a score based on how well
the author has formatted their
code and documentation and
modules are also checked for
malware using VirusTotal.

Please note, the information below
is for guidance only and neither of
these methods should be considered
an endorsement by Puppet.

Version information

  • 2.0.0 (latest)
released Nov 9th 2017
This version is compatible with:
  • Puppet Enterprise 2017.2.x, 2017.1.x, 2016.5.x, 2016.4.x
  • Puppet >= 3.0.0 < 5.0.0

Start using this module

  • r10k or Code Manager
  • Bolt
  • Manual installation
  • Direct download

Add this module to your Puppetfile:

mod 'lmaxexchange-ptpd', '2.0.0'
Learn more about managing modules with a Puppetfile

Add this module to your Bolt project:

bolt module add lmaxexchange-ptpd
Learn more about using this module with an existing project

Manually install this module globally with Puppet module tool:

puppet module install lmaxexchange-ptpd --version 2.0.0

Direct download is not typically how you would use a Puppet module to manage your infrastructure, but you may want to download the module in order to inspect the code.

Download

Documentation

lmaxexchange/ptpd — version 2.0.0 Nov 9th 2017

ptpd

Build Status

Table of Contents

  1. Overview
  2. Module Description
  3. Setup
  4. Usage
  5. Reference
  6. Limitations
  7. Development

Overview

Manages the Precision Time Protocol (PTP) version 2 software, PTPd.

Module Description

This module will manage the configuration files for ptpd, namely /etc/ptpd.conf, along with the associated service.

This module is designed for ptpd version 2.3.2 or later, specifically with Linux PHC support built in.

Don't try and use this module to manage older versions of PTPd, such as those found in RHEL 6 - there are significant changes the recent releases which means it probably won't work.

Setup

Requirements

This Puppet class is expected to work with ptpd version 2.3.2 with Linux PHC support, or later. At the time of writing this was not merged into mainline, nor where there packages for it.

So, you need to build your own from source, which can be found here:

https://github.com/wowczarek/ptpd/tree/wowczarek-2.3.2-libcck

This module depends on b4ldr-logrotate for log rotation, but this can be disabled.

Beginning with ptpd

Resource-like syntax is probably the better option, as you will need to configure the module:

class { 'ptpd:' }

Or if all your parameters are in Hiera:

include ptpd

If you've built ptpd with a different package name:

class { 'ptpd:'
  package_name => 'my-ptpd',
}

Single Instance vs Multi Instance

The simplest way to use this module is in single_instance mode, where it's your standard one package / one config file / one service model. When single_instance is set to true, you only need to pass parameters to the ptpd class.

There is a more complicated way of using this module which is useful if you need to run multiple PTPd daemons on the one server (ie: if you are pushing a PTP signal out of multiple discrete interfaces). Multi Instance mode is enabled by setting single_instance to false:

class { 'ptpd':
  single_instance => false,
}

When configued in Multi Instance mode, you won't get a default configuration file, and you won't get any services. You can use the ptpd::instance defined type to write out multiple configuration files, and then it is up to you how you start multiple daemons (eg: Supervisord). For example, the following code will create two ptpd config files /etc/ptpd.first.conf and /etc/ptpd.second.conf:

class { 'ptpd':
  single_instance => false,
}
ptpd::instance { 'first':
  single_instance     => false,
  ptpengine_interface => 'eth0',
}
ptpd::instance { 'second':
  single_instance     => false,
  ptpengine_interface => 'eth1',
}

The configuration should be partitioned so that the daemons can run independently of each other. You will need to specify a few command line options for those settings which are not read from the configuration file (ie: the conf file itself and the lock file):

/usr/sbin/ptpd --global:lock_file=/var/run/ptpd.first.lock --global:status_file=/var/run/ptpd.first.status -c /etc/ptpd.first.conf
/usr/sbin/ptpd --global:lock_file=/var/run/ptpd.second.lock --global:status_file=/var/run/ptpd.second.status -c /etc/ptpd.second.conf

Running an NTP-backed PTP Master

Have PTPd run as a Master Clock, sending out a signal on interface 'em1'. This assumes NTP is running and disciplining the System Clock:

class { 'ptpd:'
  ptpengine_interface     => 'em1',
  clock_master_clock_name => 'syst',
  ptpengine_preset        => 'masteronly',
}

Reference

Classes

Public Classes

  • ptpd: Class that installs and configures ptpd.

Parameters

ptpd

single_instance

This boolean describes whether the class and define are in Single Instance mode or Multi Instance mode. When in Multi Instance mode you have the ability to write multiple configuration files but you have to manage the daemons yourself.

ptpengine_interface

The interface to listen to PTP on. Must be specified.

ptpengine_domain

PTP domain number. Usually zero, allows you to run multiple PTP streams on the same network and only listen to one of them.

Defaults to 0.

ptpengine_preset

Either slaveonly, masterslave, or masteronly. Useful for making PTPd only ever be a slave, for example.

Defaults to slaveonly.

ptpengine_hardware_timestamping

Defaults to true.

ptpengine_delay_mechanism

Either E2E or P2P. Whether to use End to End or Peer to Peer delay detection. P2P only works when every device in the network between master and slave is "PTP aware".

Defaults to E2E.

ptpengine_ip_mode

IP transmission mode, must be one of multicast, hybrid, or unicast. Hybrid mode is the "Enterprise" profile where Sync and Announce messages are multicast from the master, but delay requests and responses are unicast from the slaves.

Defaults to hybrid.

ptpengine_panic_mode

Enable or disable panic mode, which disables clock updates for ptpengine_panic_mode_duration seconds and then steps the clock if the offset is above 1 second.

Defaults to y.

ptpengine_disable_bmca

Disable the Best Master Clock Algorithm.

Defaults to false.

ptpengine_panic_mode_duration

How long to be in panic mode for.

Default to 30.

servo_adev_locked_threshold_low_hw

Minimum Allan Deviation of a hardware clock's frequency to be considered stable / locked.

Defaults to undef.

servo_adev_locked_threshold_high_hw

Allan Deviation of a hardware clock's frequency to be considered no longer stable.

Defaults to undef.

servo_adev_locked_threshold_low

Minimum Allan Deviation of a software clock's frequency to be considered stable / locked.

Defaults to undef.

servo_adev_locked_threshold_high

Allan Deviation of a software clock's frequency to be considered no longer stable.

Defaults to undef.

servo_kp

The kP value (proportional component gain) of the clock servo PI controller for software clocks.

Defaults to undef.

servo_ki

The kI value (integral component gain) of the clock servo PI controller for software clocks.

Defaults to undef.

servo_kp_hardware

The kP value (proportional component gain) of the clock servo PI controller for hardware clocks.

Defaults to undef.

servo_ki_hardware

The kI value (integral component gain) of the clock servo PI controller for hardware clocks.

Defaults to undef.

clock_leap_second_handling

Controls behaviour during a leap seceond event. Should be one of accept, ignore, step, or smear.

Defaults to accept.

clock_max_offset_ppm

Maximum frequency shift which can be applied to a software clock servo.

Defaults to 500.

clock_max_offset_ppm_hardware

Maximum frequency shift which can be applied to a hardware clock servo.

Defaults to 500.

clock_master_clock_name

The name of the preferred clock source.

Defaults to undef.

clock_disabled_clock_names

Disables disciplining on this list of clocks.

Defaults to undef.

clock_extra_clocks

Have the PTP daemon discipline extra clocks. From the PTPd daemon help:

    The format is type:path:name where "type" can be: "unix" for Unix clocks and "linuxphc"
     for Linux PHC clocks, "path" is either the clock device path or interface name, and
     "name" is user's name for the clock (20 characters max). If no name is given, it is
     extracted from the path name.

Defaults to undef.

global_log_file

Location of the daemon log file.

Defaults to /var/log/ptpd.log.

log_statistics

Whether to log statistics to disk or not (can take a lot of space when fast Sync intervals are used). The location of the statistics file is controlled by the global_statistics_file parameter.

Defaults to true.

global_statistics_file

Location of the statistics file.

Defaults to /var/log/ptpd.stats.

global_lock_file

Location of the daemon lock / PID file.

Defaults to /var/run/ptpd.lock.

global_status_file

Location of the daemon status file.

Defaults to /var/run/ptpd.status.

global_cpuaffinity_cpucore

Set a CPU core to bind on to.

Defaults to 0.

conf_file_ensure

Ensure parameter of File resources. Set to absent to clean up files.

Defaults to file.

package_name

Specify your own package name.

Defaults to ptpd-linuxphc.

package_ensure

Ensure parameter of Package resources. Set to absent to clean up packages.

Defaults to present.

service_name

The name of the PTPd service.

Defaults to ptpd.

service_ensure

The state of the PTPd service. Set to stopped to shut down the service.

Defaults to running.

service_enable

Controls whether the PTPd service starts on boot or not.

Defaults to true.

manage_logrotate

Manages a logrotate rule for the PTPd log and statistics files. This uses the b4ldr-logrotate module.

Defaults to true.

logrotate_rotate_every

Passed to the logrotate class, specifying what period to logrotate on. See the b4ldr-logrotate module.

Defaults to day.

logrotate_rotate

Passed to the logrotate class, specifying how many rotation periods. See the b4ldr-logrotate module.

Defaults to 7.

Defines

Public Defines

  • ptpd::instance: writes a PTPd configuration file, see the ptpd class for the parameter reference as all options are the same.

Limitations

The module is tested against CentOS 6. It should work in most other flavours, and I'm happy to accept pull requests for other distros.

Development

We will accept pull requests from GitHub.