Choria Puppet Agent

This agent manages the puppet agent life cycle and has the following features:

• Supports noop runs or no-noop runs
• Supports limiting runs to certain tags
• Support splay, no splay, splaylimits
• Supports specifying a custom environment
• Supports specifying a custom master host and port (needs to be explicitly allowed)
• Support Puppet 3 features like lock messages when disabling
• Use the new summary plugins to provide convenient summaries where appropriate
• Use the new validation plugins to provider richer input validation and better errors
• Data sources for the current puppet agent status and the status of the most recent run

Additionally a number of Playbooks are included:

• mcollective_agent_puppet::disable Disables the Puppet Agent
• mcollective_agent_puppet::disable_and_wait Disables the Puppet Agent and wait for in-progress catalog runs to complete
• mcollective_agent_puppet::enable Enables the Puppet Agent
• mcollective_agent_puppet::find_stuck_agents Finds agents in a stuck state that will not continue without manual intervention

You can use these from other Choria Playbooks or on the CLI

Actions

This agent provides the following actions, for details about each please run mco plugin doc agent/puppet

• disable - Disable the Puppet agent
• enable - Enable the Puppet agent
• last_run_summary - Get the summary of the last Puppet run
• resource - Evaluate Puppet RAL resources
• runonce - Invoke a single Puppet run
• status - Get the current status of the Puppet agent

Agent Installation

This agent is installed by default as part of the Choria Orchestrator.

Configuring the agent

By default it just works if you run puppet-agent from Puppet Inc. There are a few settings you can tweak using Hiera:

mcollective_agent_puppet::config:
  command: "puppet agent"
  splay: true
  splaylimit: 30
  windows_service: puppet
  signal_daemon: true

These are the defaults, adjust to taste.

If command is not set, it will try to find puppet via the PATH environment variable. On non-Windows systems, /opt/puppetlabs/bin will be appended to PATH if the command doesn't include a file path.

Warning: If Puppet is not on the PATH and you are not using the puppet-agent package provided by Puppet, this can result in running a binary placed by any user that has write access to /opt. If that is a concern, ensure command is configured.

The agent allows managing of any resource via the Puppet RAL. By default it refuses to manage a resource also managed by Puppet which could create conflicting state. If you do wish to allow any resources to be managed set this to true:

mcollective_agent_puppet::config:
  resource_allow_managed_resources: true

The resource action can manage any resource type Puppet can, by default we blacklist the all types due to the potential damage this feature can do to your system if not correctly setup. You can specify either a whitelist or a blacklist of types this agent will be able to manage - you cannot specify both a blacklist and a whitelist.

mcollective_agent_puppet::config:
  resource_type_whitelist: host,alias
  resource_type_blacklist: exec

If you supply the value none to type_whitelist it will have the effect of denying all resource management - this is the default.

On Windows, the name of the Puppet service is needed to determine if the service is running. The service name varies between Puppet open source and Puppet Enterprise (puppet vs. pe-puppet); the default is puppet, but it can be explicitly specified:

mcollective_agent_puppet::config:
  windows_service: puppet

The agent will by default invoke command to initiate a run, passing through any applicable flags to adjust behavior. On POSIX-compliant platforms where Puppet is already running in daemonized mode we support sending the daemonized service a USR1 signal to trigger the daemonized process to perform an immediate check-in. This will inhibit customizations to the run (such as noop or environment), but it is the default. It's reccomended that you disable this like so:

mcollective_agent_puppet::config:
  signal_daemon: false

The agent will not by default accept the server option. If passed then the agent returns an error. Passing the option can be allowed in the configuration file like so:

mcollective_agent_puppet::config:
  allow_server_override: true

Authorization

By default the Action Policy system is configured to only allow status and last_run_summary actions from all users. These are read only and does not expose secrets.

Follow the Choria documentation to configure your own policies either site wide or per agent.

If you do configure any Policies specific to this module these defaults will be overriden when done using Hiera.

An example policy can be seen here:

mcollective_agent_puppet::policies:
  - action: "allow"
    callers: "choria=manager.mcollective"
    actions: "disable enable"
    facts: "*"
    classes: "*"

Usage

Running Puppet

Most basic case is just a run:

$ mco puppet runonce

...against a specific server and port (needs to be explicitly allowed):

$ mco puppet runonce --server puppet.example.net:1234

...just some tags

$ mco puppet runonce --tag one --tag two --tag three
$ mco puppet runonce --tag one,two,three
$ mco puppet runonce --tags one,two,three

...a noop run

$ mco puppet runonce --noop

...a actual run when noop is set in the config file

$ mco puppet runonce --no-noop

...in a specific environment

$ mco puppet runonce --environment development

...a splay run

$ mco puppet runonce --splay --splaylimit 120

...or if you have splay on by default and do not want to splay

$ mco puppet runonce --no-splay

...or if you want to ignore schedules for a single run

$ mco puppet runonce --ignoreschedules

These can all be combined to your liking

Requesting agent status

The status of the agent can be obtained:

$ mco puppet status

 * [ ============================================================> ] 2 / 2

   dev1.example.net: Currently stopped; last completed run 9 minutes 11 seconds ago
   dev2.example.net: Currently stopped; last completed run 9 minutes 33 seconds ago

Summary of Applying:

   false = 2

Summary of Daemon Running:

   stopped = 2

Summary of Enabled:

   enabled = 2

Summary of Idling:

   false = 2

Summary of Status:

   stopped = 2


Finished processing 2 / 2 hosts in 45.01 ms

Requesting last run status

We can show a graph view of various metrics of the last Puppet run using the mco puppet summary command.

$ mco puppet summary

Summary statistics for 15 nodes:

                  Total resources: ▇▁▁▁▁▁▁▁▁▂▁▂▁▁▂▂▁▁▁▂  min: 112.0  avg: 288.9  max: 735.0
            Out Of Sync resources: ▇▂▁▄▂▂▁▁▁▁▁▁▁▁▁▁▁▁▁▁  min: 0.0    avg: 2.5    max: 7.0
                 Failed resources: ▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁  min: 0.0    avg: 0.0    max: 0.0
                Changed resources: ▇▂▁▄▂▂▁▁▁▁▁▁▁▁▁▁▁▁▁▁  min: 0.0    avg: 2.5    max: 7.0
              Corrected resources: ▇▂▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁  min: 0.0    avg: 0.7    max: 2.0
  Config Retrieval time (seconds): ▇▂▁▁▃▁▃▂▁▁▁▁▁▁▁▁▁▁▁▁  min: 2.4    avg: 6.6    max: 15.0
         Total run-time (seconds): ▇▃▂▁▃▂▁▁▂▁▁▁▂▁▁▂▁▁▁▁  min: 6.1    avg: 22.9   max: 73.4
    Time since last run (seconds): ▇▁▂▁▁▂▁▁▁▂▁▁▁▁▁▂▂▂▂▃  min: 86.0   avg: 758.9  max: 1.7k

Here each bar indicates the number of nodes that fall within the region, for example we can see there are a group of nodes on the right that took longer to run than the others.

You can find which of those nodes took longer than 50 seconds:

$ mco find -S "resource().total_time>50"

Problems with Displaying the Bars

Not all popular SSH clients display the bars correctly. Please ensure your client has UTF-8 enabled, and uses a suitable font such as dejavu. The following clients have been confirmed to work:

• PuTTY on Windows
• mintty on Cygwin on Windows

Enabling and disabling

Puppet 3 supports a message when enabling and disabling

$ mco rpc puppet disable message="doing some hand hacking"
$ mco rpc puppet enable

The message will be displayed when requesting agent status if it is disabled, when no message is supplied a default will be used that will include your mcollective caller identity and the time

Running all enabled Puppet nodes

Often after committing a change you want the change to be rolled out to your infrastructure as soon as possible within the performance constraints of your infrastructure.

The performance of a Puppet Master generally comes down to the maximum concurrent Puppet nodes that are applying a catalog it can sustain.

Using the MCollective infrastructure we can determine how many machines are currently enabled and applying catalogs.

Thus to do a Puppet run of your entire infrastructure keeping the concurrent Puppet runs as close as possible to 10 nodes at a time you would do:

$ mco puppet runall 10

Below is the output from a run using a concurrency of 1 to highlight the output you might expect:

$ mco puppet runall 1
2013-01-16 16:14:26: Running all nodes with a concurrency of 1
2013-01-16 16:14:26: Discovering enabled Puppet nodes to manage
2013-01-16 16:14:29: Found 2 enabled nodes
2013-01-16 16:14:32: Currently 1 node applying the catalog; waiting for less than 1
2013-01-16 16:14:37: dev1.example.net schedule status: Started a background Puppet run using the 'puppet agent --onetime --daemonize --color=false' command
2013-01-16 16:14:38: 1 out of 2 hosts left to run in this iteration
2013-01-16 16:14:40: Currently 1 node applying the catalog; waiting for less than 1
2013-01-16 16:14:44: Currently 1 node applying the catalog; waiting for less than 1
2013-01-16 16:14:48: Currently 1 node applying the catalog; waiting for less than 1
2013-01-16 16:14:52: Currently 1 node applying the catalog; waiting for less than 1
2013-01-16 16:14:56: Currently 1 node applying the catalog; waiting for less than 1
2013-01-16 16:15:00: Currently 1 node applying the catalog; waiting for less than 1
2013-01-16 16:15:04: Currently 1 node applying the catalog; waiting for less than 1
2013-01-16 16:15:08: Currently 1 node applying the catalog; waiting for less than 1
2013-01-16 16:15:13: dev2.example.net schedule status: Started a background Puppet run using the 'puppet agent --onetime --daemonize --color=false' command

Here we can see it first finds all machine that are enabled and then periodically checks if the amount of instances currently applying a catalog is less than the concurrency and then start as many machines as it can till it once again reaches the concurrency limit.

Note that you can pass flags like --noop and --no-noop but the splay settings will not work as the runall command does forced runs which negates splay.

If you wish to repeat this in a loop forever you can pass the --rerun argument giving it the minimum amount of time a loop over all the nodes must take:

$ mco puppet runall 1 --rerun 3600

This performs the same run logic as before but when it comes to the end of the run it will sleep for the difference between 3600 seconds and how long the run took. If the run took longer than 3600 seconds it will immediately start a new one.

Discovering based on agent status

Two data plugins are provided, to see what data is available about the running agent do:

$ mco rpc rpcutil get_data source=puppet
Discovering hosts using the mc method for 2 second(s) .... 1

 * [ ============================================================> ] 1 / 1


dev1.example.net
          applying: false
    daemon_present: false
   disable_message:
           enabled: true
           lastrun: 1348745262
     since_lastrun: 7776
            status: stopped

Finished processing 1 / 1 hosts in 76.34 ms

You can then use any of this data in discovery, to restart apache on machines with Puppet disable can now be done easily:

$ mco rpc service restart service=httpd -S "puppet().enabled=false"

You can restart apache on all machine that has File[/srv/www] managed by Puppet:

$ mco rpc service restart service=httpd -S "resource('file[/srv/wwww]').managed=true"

...or machines that had many changes in the most recent run:

$ mco rpc service restart service=httpd -S "resource().changed_resources>10"

...or that had failures

$ mco rpc service restart service=httpd -S "resource().failed_resources>0"

Other available data include config_retrieval_time, config_version, lastrun, out_of_sync_resources, since_lastrun, total_resources and total_time

Integration with the Action Policy Authorization plugin

The Action Policy plugin supports querying the above data plugins to express Authorization rules.

You can therefore use the enabled state of the Puppet Agent to limit access to other actions.

The use case would be that you want:

• Only allow services to be stopped during maintenance periods when Puppet is disabled
• Only allow the site manager to disable Puppet

You can control the service agent with the following policy using the service.policy file:

mcollective_agent_puppet::policies:
  - action: "allow"
    callers: "choria=user.mcollective"
    facts: "puppet().enabled=false"

And you can then allow the manager user to disable and enable nodes using the puppet.policy file:

mcollective_agent_puppet::policies:
  - action: "allow"
    callers: "choria=manager.mcollective"
    actions: "disable enable"
    facts: "*"
    classes: "*"

Together this allows you to ensure that you both have a maintenance window and a period where Puppet will not start services again without your knowledge

Note: The runall action is implemented in terms of the runonce action. When setting up Actionpolicy rules, be sure to include a runonce action permission.

Managing individual resources using the RAL

Puppet is built on resource types and providers for those types, an instance of a resource type looks like:

host{"db":
  ip  =>  "192.168.1.10"
}

These are known as the Resource Abstraction Layer or the RAL.

You can use MCollective to manage individual parts of your servers using the RAL.

To add a host entry to your webservers matching the above resource you can do the following:

$ mco puppet resource host db ip=192.168.1.11 -W role::webserver

 * [ ============================================================> ] 11 / 11


 node4.example.net
    Result: ip changed '192.168.1.10' to '192.168.1.11'
.
.
Summary of Changed:

   Changed = 1

Finished processing 11 / 11 hosts in 118.97 ms

Here we used the RAL to change the hosts entry for the hostname db to 192.168.1.11 and the output shows you it changed from a previous value to this entry.

Any hosts where the operation failed will fail in the normal manner

This is a very dangerous feature as people can make real changes to your machines and potentially cause all kinds of problems.

We support a few restrictions:

• You can whitelist or blacklist which types can be executed, you want to avoid exec types for example
• You can whitelist or blacklist which resource name can be executed, you want to avoid ssh package name for example
• You can allow or deny the ability to change resources that Puppet is also managing as you'd want to avoid creating conflicting state

By default if not specifically configured this feature is not usable as it defaults to the following configuration:

mcollective_agent_puppet::config:
  resource_allow_managed_resources: true
  resource_type_whitelist: none

You can allow all types except the exec, service and package types using the following config line:

mcollective_agent_puppet::config:
  resource_type_blacklist: exec,service,package

You can say which resource names are allowed or denied. You define whitelist or blacklist for resource type by adding resource type after resource_name_whitelist or resource_name_blacklist, for example:

mcollective_agent_puppet::config:
  resource_name_blacklist.package: ssh

If you not defined list for resource type, all names are allowed.

You cannot mix and match white and black lists.

So to repeat by default this feature is effectively turned off as there is an empty whitelist by default - no types are allowed to be managed. You should think carefully before enabling this feature and combine it with the Authorization system when you do

Changelog

Change history for choria/mcollective_agent_puppet

2.4.1

Release 2021-03-29

• Support Puppet 7

2.4.0

Release 2021-01-01

• Support -E to set the environment as a shorthand for --environment
• Support Puppet 7 (#46)
• Support --skip_tags (#39)

2.3.3

Release 2020-06-23

• Support runall on Choria Server (#43)

2.3.2

Release 2019-12-17

• Add type hints to output fields of the DDL (#40)

2.3.1

Released 2018-11-04

• Improve resource management feature under the Choria Server (#32)

2.3.0

Released 2018-10-13

• Add support for Puppet 6 (#29)
• Syntax fixes in find_stuck_agents plan (#27)

2.2.0

Released 2018-07-20

• Improve bundled plans on the CLI by doing discovery when no nodes are given (#20)
• Allow setting the active environment for puppet resource allowing remote file fetch from Puppet Server (#24)

2.1.0

Released 2018-05-21

• Add a mcollective_agent_puppet::find_stuck_agents playbook to find agents that are hung

2.0.2

Released 2018-04-20

• Use Process.spawn() on Unix systems (13)

2.0.1

Released 2018-04-20

• Include JSON DDL files
• Add Licencing files and contribution guidelines

2.0.0

Released 2018-02-26

• Update documentation to be of use to Choria users (7)
• Add enable, disable and disable_and_wait Playbooks (4)
• Add default Action Policies allowing read-only actions to be used by anyone (3)
• Initial release as part of the Choria Project

1.13.2

Released 2017-08-03

• Declare 'message' as part of status action response (MCOP-601)

1.13.1

Released 2017-06-29

• Do not use Fixnum, use Integer instead (MCOP-599)

1.13.0

Released 2017-04-06

• Add support for Puppet 5 (MCOP-587)
• runhosts no longer block on a single busy node (MCOP-537)

1.12.1

Released 2017-02-27

This is a security fix, addressing a privilege escalation that was possible using the default locations of AIO paths. Because these weren't confined to a specific platform, any user could create a file on Windows that would resolve to the Linux path.

• Only use AIO location for a given platform, and as a fallback if PATH fails (MCOP-585)
• Consider puppet-agent AIO paths on Windows as well (MCP-584)

1.12.0

Released 2017-01-19

• Add display of average values to the puppet summary report (MCOP-538)
• Consider puppet-agent AIO paths when determining agent command (MCOP-576)
• Report corrective change from puppet run summary when available (MCOP-578)
• Do not assume a disabled agent is idle (MCOP-581)
• Improve last_run_summary logs output, rename parse_log to logs (MCOP-580)

1.11.1

Released 2016-06-27

• Disallow server option by default CVE-2015-7331 (MCOP-557)

1.11.0

Released 2016-05-26

• Add support for puppet's use_cached_catalog option (MCOP-539)
• Pin rake to 10.4 to enable running test on ruby 1.8.7 (PR#63)
• Enable splay/force options in daemon mode, without signal_daemon set (PR#59)
• Update for newer versions of the win32-process gem (MCOP-525)
• Run puppet on windows with a console - fixes the powershell exec provider (MCOP-521)

1.10.0

Released 2015-04-14

• Added support for puppet 4.0. (MCOP-496)

1.9.3

Released 2014-12-02

• Fully qualify the call to MCollective::Log in MCollective::Application::Puppet (MCOP-405)

1.9.2

Released 2014-10-25

• Refactor Puppetrunner#run_hosts to remove a infinite loop (MCOP-351)
• Add more log messages at debug (MCOP-352)

1.9.1

Released 2014-10-23

• Extract make_status to fix some code flows in mco runall (MCOP-330)

1.9.0

Released 2014-10-21

• Track nodes that did not respond to the puppet.status action during runall (MCOP-309)
• Expose plugin.puppet.signal_daemon configuration option (PR#37, MCOP-310)

1.8.1

Released 2014-09-11

• Handle slow/no response from agents when told to run (MCOP-290)

1.8.0

Released 2014-08-20

• Correctly honor concurrency argument of runall (MCOP-20)
• Allow for validation of IPs as named (MCOP-13)
• Change foreground run parameters to allow --splay to work again (PR#17 hblock)
• Refactored some internals to make tests less order-dependent (MCOP-12)
• Switched to using Process#spawn on Windows systems to correctly respect PATH (MCOP-52)
• Add the ability to whitelist and blacklist resources based on resource name (PR#28 tczekajlo)
• Default data plugin values to avoid exceptions around returning nil (MCOP-47)
• Make runall work with compound filters (MCOP-67)

1.7.2

Released 2014-04-25

• Fix mco puppet backtrace when no results are returned (MCOP-26)
• Remove implicit requirement on puppet 3.5.x (MCOP-25)

1.7.1

Released 2014-04-23

• Fix puppet initialization issue that broke mcollective-server-agent (MCOP-23)

1.7.0

Released 2014-02-20

• Fully qualified uses of Process to avoid clashes with process agent (PR#13)
• Fix --no-noop and --no-splay under MCollective 2.3.x and 2.4.x (MCOP-5)
• Change method of running puppet agent to double-fork a foregroung run (MCO-31)

1.6.2

Released 2013-12-04

• Change noop to no-op for frontend text (MCO-28)

1.6.1

Released 2013-10-15

• Make --force option correct imply --no-splay (22860)

1.6.0

Released 2013-06-08

• Support controlling Puppet on Windows (19541)
• Increase the DDL timeout to better handle slower servers where puppet start is slow (20618)

1.5.1

Released 2013-03-01

• Add a --rerun option to the runall command that loops over the nodes forever (19541)

1.5.0

Released 2013-02-22

• Add the mco puppet resource command (12712)
• Correctly handle mixed case resource names when determining if a resource is managed (19384)
• Improve error message when a resource does not pass validation (19384)

1.4.1

Released 2013-02-16

• Provide type distribution data in the last_run_summary action (19284)

1.4.0

Released 2013-02-08

• Add support for --ignoreschedules (19106)
• Add --tags as an alias to --tag (19137)

1.3.0

Released 2013-02-06

• Support custom puppet config locations using plugin.puppet.config (19094)

1.2.1

Released 2013-02-01

• Prevent uneeded warning log messages each time status is requested (18956)

1.2.0

Released 2013-01-17

• Add sparkline based summary stat graphs for the entire estate (18704)

1.1.1

Released 2013-01-16

• Add the --runall command (18664)

1.1.0

Released 2013-01-09

• Report idling time and check if the agent is disabled before attempting to run (15472)
• Add the mco puppet application (15472)