puppetdb

Table of Contents

1. Overview - What is the PuppetDB module?
2. Module Description - What does the module do?
3. Setup - The basics of getting started with PuppetDB module
4. Upgrading - Guide for upgrading from older revisions of this module
5. Usage - The classes and parameters available for configuration
6. Implementation - An under-the-hood peek at what the module is doing
7. Limitations - OS compatibility, etc.
8. Development - Guide for contributing to the module
9. Release Notes - Notes on the most recent updates to the module

Overview

By guiding puppetdb setup and configuration with a Puppet master, the PuppetDB module provides fast, streamlined access to data on puppetized infrastructure.

Module Description

The PuppetDB module provides a quick way to get started using PuppetDB, an open source inventory resource service that manages storage and retrieval of platform-generated data. The module will install PostgreSQL and PuppetDB if you don't have them, as well as set up the connection to Puppet master. The module will also provide a dashboard you can use to view the current state of your system.

For more information about PuppetDB please see the official PuppetDB documentation.

Setup

What PuppetDB affects:

• package/service/configuration files for PuppetDB
• package/service/configuration files for PostgreSQL (optional, but set as default)
• Puppet master's runtime (via plugins)
• Puppet master's configuration
  • note: Using the puppetdb::master::config class will cause your routes.yaml file to be overwritten entirely (see Usage below for options and more information )
• system firewall (optional)
• listened-to ports

Introductory Questions

To begin using PuppetDB, you’ll have to make a few decisions:

• Which database back-end should I use?
  • PostgreSQL (default) or our embedded database
  • Embedded database
    • note: As of PuppetDB 4.0, the embedded database is no longer supported as an option. When running PuppetDB 3.x, we suggest using the embedded database only for experimental environments rather than production, as it does not scale well and can cause difficulty in migrating to PostgreSQL.
• Should I run the database on the same node that I run PuppetDB on?
• Should I run PuppetDB on the same node that I run my master on?

The answers to those questions will be largely dependent on your answers to questions about your Puppet environment:

• How many nodes are you managing?
• What kind of hardware are you running on?
• Is your current load approaching the limits of your hardware?

Depending on your answers to all of the questions above, you will likely fall under one of these set-up options:

1. Single Node (Testing and Development)
2. Multiple Node (Recommended)

Single Node Setup

This approach assumes you will use our default database (PostgreSQL) and run everything (PostgreSQL, PuppetDB, Puppet master) all on the same node. This setup will be great for a testing or experimental environment. In this case, your manifest will look like:

node <hostname> {
  # Configure puppetdb and its underlying database
  class { 'puppetdb': }
  
  # Configure the Puppet master to use puppetdb
  class { 'puppetdb::master::config': }
}

You can provide some parameters for these classes if you’d like more control, but that is literally all that it will take to get you up and running with the default configuration.

Multiple Node Setup

This approach is for those who prefer not to install PuppetDB on the same node as the Puppet master. Your environment will be easier to scale if you are able to dedicate hardware to the individual system components. You may even choose to run the puppetdb server on a different node from the PostgreSQL database that it uses to store its data. So let’s have a look at what a manifest for that scenario might look like:

This is an example of a very basic 3-node setup for PuppetDB.

$puppetdb_host = 'puppetdb.example.lan'
$postgres_host = 'postgres.example.lan'
node 'master.example.lan' {
  # Here we configure the Puppet master to use PuppetDB,
  # telling it the hostname of the PuppetDB node
  class { 'puppetdb::master::config':
    puppetdb_server => $puppetdb_host,
  }
}
node 'postgres.example.lan' {
  # Here we install and configure PostgreSQL and the PuppetDB
  # database instance, and tell PostgreSQL that it should
  # listen for connections to the `$postgres_host`
  class { 'puppetdb::database::postgresql':
    listen_addresses => $postgres_host,
  }
}
node 'puppetdb.example.lan' {
  # Here we install and configure PuppetDB, and tell it where to
  # find the PostgreSQL database.
  class { 'puppetdb::server':
    database_host => $postgres_host,
  }
}

This should be all it takes to get a 3-node, distributed installation of PuppetDB up and running. Note that, if you prefer, you could easily move two of these classes to a single node and end up with a 2-node setup instead.

Enable SSL connections

To use SSL connections for the single node setup, use the following manifest:

node <hostname> {
  # Here we configure puppetdb and PostgreSQL to use ssl connections
  class { 'puppetdb':
    postgresql_ssl_on => true,
    database_host => '<hostname>',
    database_listen_address => '0.0.0.0'
  }
  
  # Configure the Puppet master to use puppetdb
  class { 'puppetdb::master::config': }

To use SSL connections for the multiple nodes setup, use the following manifest:

$puppetdb_host = 'puppetdb.example.lan'
$postgres_host = 'postgres.example.lan'

node 'master.example.lan' {
  # Here we configure the Puppet master to use PuppetDB,
  # telling it the hostname of the PuppetDB node.
  class { 'puppetdb::master::config':
    puppetdb_server => $puppetdb_host,
  }
}

node 'postgres.example.lan' {
  # Here we install and configure PostgreSQL and the PuppetDB
  # database instance, and tell PostgreSQL that it should
  # listen for connections to the `$postgres_host`. 
  # We also enable SSL connections.
  class { 'puppetdb::database::postgresql':
    listen_addresses => $postgres_host,
    postgresql_ssl_on => true,
    puppetdb_server => $puppetdb_host
  }
}

node 'puppetdb.example.lan' {
  # Here we install and configure PuppetDB, and tell it where to
  # find the PostgreSQL database. We also enable SSL connections.
  class { 'puppetdb::server':
    database_host => $postgres_host,
    postgresql_ssl_on => true
  }
}

Beginning with PuppetDB

Whether you choose a single node development setup or a multi-node setup, a basic setup of PuppetDB will cause: PostgreSQL to install on the node if it’s not already there; PuppetDB postgres database instance and user account to be created; the postgres connection to be validated and, if successful, PuppetDB to be installed and configured; PuppetDB connection to be validated and, if successful, the Puppet master config files to be modified to use PuppetDB; and the Puppet master to be restarted so that it will pick up the config changes.

If your logging level is set to INFO or finer, you should start seeing PuppetDB-related log messages appear in both your Puppet master log and your puppetdb log as subsequent agent runs occur.

Cross-node Dependencies

It is worth noting that there are some cross-node dependencies, which means that the first time you add the module's configurations to your manifests, you may see a few failed puppet runs on the affected nodes.

PuppetDB handles cross-node dependencies by taking a sort of "eventual consistency" approach. There’s nothing that the module can do to control the order in which your nodes check in, but the module can check to verify that the services it depends on are up and running before it makes configuration changes--so that’s what it does.

When your Puppet master node checks in, it will validate the connectivity to the puppetdb server before it applies its changes to the Puppet master config files. If it can’t connect to puppetdb, then the puppet run will fail and the previous config files will be left intact. This prevents your master from getting into a broken state where all incoming puppet runs fail because the master is configured to use a puppetdb server that doesn’t exist yet. The same strategy is used to handle the dependency between the puppetdb server and the postgres server.

Hence the failed puppet runs. These failures should be limited to 1 failed run on the puppetdb node, and up to 2 failed runs on the Puppet master node. After that, all of the dependencies should be satisfied and your puppet runs should start to succeed again.

You can also manually trigger puppet runs on the nodes in the correct order (Postgres, PuppetDB, Puppet master), which will avoid any failed runs.

Upgrading

Upgrading from 4.x to 5.x

Significant parameter changes are listed below:

• The PuppetDB module defaults to Puppet 4 pathing and assumes puppetserver is the master service by default
• The PuppetDB module manages Postgres repos by default. To turn this behavior off, set manage_package_repo to false.
• To specify a specific version of PuppetDB to manage, you'll need to use the puppetdb::globals class to set the version of PuppetDB you're using explicitly. The ability to configure the version in the puppetdb::server and puppetdb class have been removed.

For example if your config looked like this before:

class {'puppetdb':
    puppetdb_version => '3.2.4-1.el7',
}
class { 'puppetdb::master::config': }

and you'd still like to use the module with PuppetDB 3.2.4, all you'd have to change would be:

class { 'puppetdb::globals':
    version => '3.2.4-1.el7',
}
class { 'puppetdb' : }
class { 'puppetdb::master::config' : }

The globals class above takes into account the following PuppetDB 3 and Puppet 4 related changes:

* The `puppetdb::master:puppetdb_conf` class has added a `$legacy_terminus`
  to support the PuppetDB 2.x terminus configuration.
* The default `test_url` for the `PuppetDBConnValidator` has also been
  changed to `/pdb/meta/v1/version` but will default to `/v3/version` when
  using a PuppetDB 2.x version.
* The configuration pathing for Puppet and PuppetDB has changed with Puppet
  4 and PuppetDB 3, using PuppetDB 2.x or older assumes the old
  configuration pathing.

See the CHANGELOG file for more detailed information on changes for each release.

Upgrading from 3.x to 4.x

For this release, all dependency versions have been bumped to their latest. Significant parameter changes are listed below:

• The PuppetDB module now only supports Puppet 3.7.1 or later
• puppetlabs/postgresql 4.0.0 or later is now required
• puppetlabs/inifile 1.1.3 or later is now required
• puppetlabs/firewall 1.1.3 or later is now required
• puppetlabs/stdlib 4.2.2 or later is now required
• The parameter manage_firewall for the class puppetdb::database::postgresql has now been removed, since the PostgreSQL module no longer supports this.
• The parameter open_postgres_port for the class puppetdb has also been removed, due to PostgreSQL changes.

See the CHANGELOG file for more detailed information on changes for each release.

Upgrading from 2.x to 3.x

For this release a major dependency has changed. The module pupppetlabs/postgresql must now be version 3.x. Upgrading the module should upgrade the puppetlabs/postgresql module for you, but if another module has a fixed dependency that module will have to be fixed before you can continue.

Some other changes include:

• The parameter manage_redhat_firewall for the class puppetdb has now been removed completely in favor of open_postgres_port and open_ssl_listen_port.
• The parameter manage_redhat_firewall for the class puppetdb::database::postgresql, has now been renamed to manage_firewall.
• The parameter manage_redhat_firewall for the class puppetdb::server has now been removed completely in favor of open_listen_port and open_ssl_listen_port.
• The internal class: puppetdb::database::postgresql_db has been removed. If you were using this, it is now defunct.
• The class puppetdb::server::firewall has been marked as private, do not use it directly.
• The class puppetdb::server::jetty_ini and puppetdb::server::database_ini have been marked as private, do not use it directly.

Upgrading from 1.x to 2.x

A major dependency has been changed, so now when you upgrade to 2.0 the dependency cprice404/inifile has been replaced with puppetlabs/inifile. This may interfere with other modules as they may depend on the old cprice404/inifile instead, so upgrading should be done with caution. Check that your other modules use the newer puppetlabs/inifile module as interoperation with the old cprice404/inifile module will no longer be supported by this module.

Depending on how you install your modules, changing the dependency may require manual intervention. Double check your modules contain the newer puppetlabs/inifile after installing this latest module.

Otherwise, all existing parameters from 1.x should still work correctly.

Usage

PuppetDB supports a large number of configuration options for both configuring the puppetdb service and connecting that service to the Puppet master.

puppetdb::globals

The puppetdb::globals class is intended to provide similar functionality to the postgresql::globals class in the puppetlabs-postgresql module by exposing a top-level entry-point into the module so that we can properly set defaults for the puppetdb::params class based on the version of puppetdb you are using. This setting defaults to present.

You must declare the class to use it:

class { 'puppetdb::globals': }

Parameters within puppetdb::globals:

version

The version of the puppetdb package that should be installed. You may specify an explicit version number, 'present', or 'latest' (defaults to 'present').

puppetdb

The puppetdb class is intended as a high-level abstraction (sort of an 'all-in-one' class) to help simplify the process of getting your puppetdb server up and running. It wraps the slightly-lower-level classes puppetdb::server and puppetdb::database::*, and it'll get you up and running with everything you need (including database setup and management) on the server side. For maximum configurability, you may choose not to use this class. You may prefer to use the puppetdb::server class directly, or manage your puppetdb setup on your own.

You must declare the class to use it:

class { 'puppetdb': }

Parameters within puppetdb:

listen_address

The address that the web server should bind to for HTTP requests. Defaults to localhost. Set to 0.0.0.0 to listen on all addresses.

listen_port

The port on which the puppetdb web server should accept HTTP requests. Defaults to 8080.

disable_cleartext

If true, the puppetdb web server will only serve HTTPS and not HTTP requests (defaults to false).

open_listen_port

If true, open the http_listen_port on the firewall. Defaults to false.

ssl_listen_address

The address that the web server should bind to for HTTPS requests. Defaults to 0.0.0.0 to listen on all addresses.

ssl_listen_port

The port on which the puppetdb web server should accept HTTPS requests. Defaults to 8081.

disable_ssl

If true, the puppetdb web server will only serve HTTP and not HTTPS requests. Defaults to false.

open_ssl_listen_port

If true, open the ssl_listen_port on the firewall. Defaults to undef.

ssl_protocols

Specify the supported SSL protocols for PuppetDB (e.g. TLSv1, TLSv1.1, TLSv1.2.)

postgresql_ssl_on

If true, it configures SSL connections between PuppetDB and the PostgreSQL database. Defaults to false.

cipher_suites

Configure jetty's supported cipher-suites (e.g. SSL_ECDHE_ECDSA_WITH_AES_256_CBC_SHA384). Defaults to undef.

migrate

If true, puppetdb will automatically migrate to the latest database format at startup. If false, if the database format supplied by this version of PuppetDB doesn't match the version expected (whether newer or older), PuppetDB will exit with an error status. Defaults to true.

manage_dbserver

If true, the PostgreSQL server will be managed by this module. Defaults to true.

manage_database

If true, the PostgreSQL database will be managed by this module. Defaults to true.

database

Which database backend to use; legal values are postgres (default) or embedded. The embedded option is not supported on PuppetDB 4.0.0 or later. embedded can be used for very small installations or for testing, but is not recommended for use in production environments. For more info, see the puppetdb docs.

database_host

Hostname to use for the database connection. For single case installations this should be left as the default. Defaults to localhost, ignored for embedded database.

database_port

The port that the database server listens on. Defaults to 5432, ignored for embedded database.

database_username

The name of the database user to connect as. Defaults to puppetdb, ignored for embedded database.

database_password

The password for the database user. Defaults to puppetdb, ignored for embedded database.

manage_db_password

Whether or not the database password in database.ini will be managed by this module. Set this to false if you want to set the password some other way. Defaults to true

database_name

The name of the database instance to connect to. Defaults to puppetdb, ignored for embedded database.

jdbc_ssl_properties

The text to append to the JDBC connection URI. This should begin with a '?' character. For example, to use SSL for the PostgreSQL connection, set this parameter's value to ?ssl=true.

This setting is only available when using PostgreSQL; when using HyperSQL (the embedded database), it does nothing.

database_validate

If true, the module will attempt to connect to the database using the specified settings and fail if it is not able to do so. Defaults to true.

database_embedded_path

Embedded Database Only Changes the path location for the HSQLDB database. Does not provide migration for old data, so if you change this value and you have an existing database you will need to manually move the content also. (defaults to package default for 2.x release).

node_ttl

The length of time a node can go without receiving any new data before it's automatically deactivated. (defaults to '7d', which is a 7-day period. Set to '0d' to disable auto-deactivation). This option is supported in PuppetDB >= 1.1.0.

node_purge_ttl

The length of time a node can be deactivated before it's deleted from the database. (defaults to '14d', which is a 14-day period. Set to '0d' to disable purging). This option is supported in PuppetDB >= 1.2.0.

report_ttl

The length of time reports should be stored before being deleted. (defaults to 14d, which is a 14-day period). This option is supported in PuppetDB >= 1.1.0.

gc_interval

This controls how often (in minutes) to compact the database. The compaction process reclaims space and deletes unnecessary rows. If not supplied, the default is every 60 minutes. This option is supported in PuppetDB >= 0.9.

log_slow_statements

This sets the number of seconds before an SQL query is considered "slow." Slow SQL queries are logged as warnings, to assist in debugging and tuning. Note PuppetDB does not interrupt slow queries; it simply reports them after they complete.

The default value is 10 seconds. A value of 0 will disable logging of slow queries. This option is supported in PuppetDB >= 1.1.

conn_max_age

The maximum time (in minutes) for a pooled connection to remain unused before it is closed off.

If not supplied, we default to 60 minutes. This option is supported in PuppetDB >= 1.1.

conn_keep_alive

This sets the time (in minutes) for a connection to remain idle before sending a test query to the DB. This is useful to prevent a DB from timing out connections on its end.

If not supplied, we default to 45 minutes. This option is supported in PuppetDB >= 1.1.

conn_lifetime

The maximum time (in minutes) a pooled connection should remain open. Any connections older than this setting will be closed off. Connections currently in use will not be affected until they are returned to the pool.

If not supplied, we won't terminate connections based on their age alone. This option is supported in PuppetDB >= 1.4.

puppetdb_package

The PuppetDB package name in the package manager. Defaults to present.

puppetdb_service

The name of the PuppetDB service. Defaults to puppetdb.

puppetdb_service_status

Sets whether the service should be running or stopped. When set to stopped the service doesn't start on boot either. Valid values are true, running, false, and stopped.

confdir

The PuppetDB configuration directory. Defaults to /etc/puppetdb/conf.d.

vardir

The parent directory for the MQ's data directory.

java_args

Java VM options used for overriding default Java VM options specified in PuppetDB package. Defaults to {}. See PuppetDB Configuration to get more details about the current defaults.

For example, to set -Xmx512m -Xms256m options use:

{
    '-Xmx' => '512m',
    '-Xms' => '256m',
}

merge_default_java_args

Sets whether the provided java args should be merged with the defaults, or should override the defaults. This setting is necessary if any of the defaults are to be removed. Defaults to true. If false, the java_args in the PuppetDB init config file will reflect only what is passed via the java_args param.

max_threads

Jetty option to explicitly set max-threads. Defaults to undef, so the PuppetDB-Jetty default is used.

read_database

Which database backend to use for the read database. Only supports postgres (default). This option is supported in PuppetDB >= 1.6.

read_database_host

This parameter must be set to use another PuppetDB instance for queries.

The hostname or IP address of the read database server. If set to undef, and manage_database is set to true, it will use the value of the database_host parameter. This option is supported in PuppetDB >= 1.6.

read_database_port

The port that the read database server listens on. If read_database_host is set to undef, and manage_database is set to true, it will use the value of the database_port parameter. This option is supported in PuppetDB >= 1.6.

read_database_username

The name of the read database user to connect as. Defaults to puppetdb-read. This option is supported in PuppetDB >= 1.6.

read_database_password

The password for the read database user. Defaults to puppetdb-read. This option is supported in PuppetDB >= 1.6.

manage_read_db_password

Whether or not the database password in read-database.ini will be managed by this module. Set this to false if you want to set the password some other way. Defaults to true

read_database_name

The name of the read database instance to connect to. If read_database_host is set to undef, and manage_database is set to true, it will use the value of the database_name parameter. This option is supported in PuppetDB >= 1.6.

read_log_slow_statements

This sets the number of seconds before an SQL query to the read database is considered "slow." Slow SQL queries are logged as warnings, to assist in debugging and tuning. Note PuppetDB does not interrupt slow queries; it simply reports them after they complete.

The default value is 10 seconds. A value of 0 will disable logging of slow queries. This option is supported in PuppetDB >= 1.6.

read_conn_max_age

The maximum time (in minutes) for a pooled read database connection to remain unused before it is closed off.

If not supplied, we default to 60 minutes. This option is supported in PuppetDB >= 1.6.

read_conn_keep_alive

This sets the time (in minutes) for a read database connection to remain idle before sending a test query to the DB. This is useful to prevent a DB from timing out connections on its end.

If not supplied, we default to 45 minutes. This option is supported in PuppetDB >= 1.6.

read_conn_lifetime

The maximum time (in minutes) a pooled read database connection should remain open. Any connections older than this setting will be closed off. Connections currently in use will not be affected until they are returned to the pool.

If not supplied, we won't terminate connections based on their age alone. This option is supported in PuppetDB >= 1.6.

ssl_dir

Base directory for PuppetDB SSL configuration. Defaults to /etc/puppetdb/ssl or /etc/puppetlabs/puppetdb/ssl for FOSS and PE respectively.

ssl_set_cert_paths

A switch to enable or disable the management of SSL certificates in your jetty.ini configuration file.

ssl_cert_path

Path to your SSL certificate for populating jetty.ini.

ssl_key_path

Path to your SSL key for populating jetty.ini.

ssl_ca_cert_path

Path to your SSL CA for populating jetty.ini.

ssl_deploy_certs

A boolean switch to enable or disable the management of SSL keys in your ssl_dir. Default is false.

ssl_key

Contents of your SSL key, as a string.

ssl_cert

Contents of your SSL certificate, as a string.

ssl_ca_cert

Contents of your SSL CA certificate, as a string.

manage_firewall

If true, puppet will manage your iptables rules for PuppetDB via the puppetlabs-firewall class.

command_threads

The number of command processing threads to use. Defaults to undef, using the PuppetDB built-in default.

concurrent_writes

The number of threads allowed to write to disk at any one time. Defaults to undef, which uses the PuppetDB built-in default.

store_usage

The amount of disk space (in MB) to allow for persistent message storage. Defaults to undef, using the PuppetDB built-in default.

temp_usage

The amount of disk space (in MB) to allow for temporary message storage. Defaults to undef, using the PuppetDB built-in default.

disable_update_checking

Setting this to true disables checking for updated versions of PuppetDB and sending basic analytics data to Puppet. Defaults to undef, using the PuppetDB built-in default.

certificate_whitelist_file

The name of the certificate whitelist file to set up and configure in PuppetDB. Defaults to /etc/puppetdb/certificate-whitelist or /etc/puppetlabs/puppetdb/certificate-whitelist for FOSS and PE respectively.

certificate_whitelist

Array of the X.509 certificate Common Names of clients allowed to connect to PuppetDB. Defaults to empty. Be aware that this permits full access to all Puppet clients to download anything contained in PuppetDB, including the full catalogs of all nodes, which possibly contain sensitive information. Set to [ $::servername ] to allow access only from your (single) Puppet master, which is enough for normal operation. Set to a list of Puppet masters if you have multiple.

automatic_dlo_cleanup

PuppetDB creates Dead Letter Office. Those are reports of failed requests. They spill up the disk. This parameter is a boolean and defaults to false. You can enable automatic cleanup of DLO reports by setting this to true.

cleanup_timer_interval

The DLO cleanup is a systemd timer if systemd is available, otherwise a cronjob. The variable configures the systemd.timer option onCalender. It defaults to *-*-* ${fqdn_rand(24)}:${fqdn_rand(60)}:00. This will start the cleanup service on a daily basis. The exact minute and hour is random per node based on the fqdn_rand method. On non-systemd systems, the cron runs daily and the $puppetdb_user needs to be able to run cron jobs. On systemd systems you need the camptocamp/systemd module, which is an optional dependency and not automatically installed!

dlo_max_age

This is a positive integer. It describes the amount of days you want to keep the DLO reports. The default value is 90 days.

puppetdb::server

The puppetdb::server class manages the PuppetDB server independently of the underlying database that it depends on. It will manage the PuppetDB package, service, config files, etc., but will still allow you to manage the database (e.g. PostgreSQL) however you see fit.

class { 'puppetdb::server':
  database_host => 'pg1.mydomain.com',
}

puppetdb::master::config

The puppetdb::master::config class directs your Puppet master to use PuppetDB, which means that this class should be used on your Puppet master node. It’ll verify that it can successfully communicate with your PuppetDB server, and then configure your master to use PuppetDB.

Using this class allows the module to manipulate the puppet configuration files puppet.conf and routes.yaml. The puppet.conf changes are supplemental and should not affect any of your existing settings, but the routes.yaml file will be overwritten entirely. If you have an existing routes.yaml file, you will want to take care to use the manage_routes parameter of this class to prevent the module from managing that file, and you’ll need to manage it yourself.

class { 'puppetdb::master::config':
  puppetdb_server => 'my.host.name',
  puppetdb_port   => 8081,
}

Parameters within puppetdb::master::config:

puppetdb_server

The dns name or ip of the PuppetDB server. Defaults to the hostname of the current node, i.e. $::fqdn.

puppetdb_port

The port that the PuppetDB server is running on. Defaults to 8081.

puppetdb_disable_ssl

If true, use plain HTTP to talk to PuppetDB. Defaults to the value of disable_ssl if PuppetDB is on the same server as the Puppet Master, or else false. If you set this, you probably need to set puppetdb_port to match the HTTP port of the PuppetDB.

puppetdb_soft_write_failure

Boolean to fail in a soft manner if PuppetDB is not accessible for command submission Defaults to false.

manage_routes

If true, the module will overwrite the Puppet master's routes file to configure it to use PuppetDB. Defaults to true.

manage_storeconfigs

If true, the module will manage the Puppet master's storeconfig settings. Defaults to true.

manage_report_processor

If true, the module will manage the 'reports' field in the puppet.conf file to enable or disable the PuppetDB report processor. Defaults to false.

manage_config

If true, the module will store values from puppetdb_server and puppetdb_port parameters in the PuppetDB configuration file. If false, an existing PuppetDB configuration file will be used to retrieve server and port values.

create_puppet_service_resource

If true, AND if restart_puppet is true, then the module will create a service resource for puppet_service_name if it has not been defined. Defaults to true. If you are already declaring the puppet_service_name service resource in another part of your code, setting this to false will avoid creation of that service resource by this module, avoiding potential duplicate resource errors.

strict_validation

If true, the module will fail if PuppetDB is not reachable, otherwise it will preconfigure PuppetDB without checking.

enable_reports

Ignored unless manage_report_processor is true, in which case this setting will determine whether or not the PuppetDB report processor is enabled (true) or disabled (false) in the puppet.conf file.

enable_storeconfigs

Ignored unless manage_storeconfigs is true, in which case this setting will determine whether or not client configuration storage is enabled (true) or disabled (false) in the puppet.conf file.

puppet_confdir

Puppet's config directory. Defaults to /etc/puppet.

puppet_conf

Puppet's config file. Defaults to /etc/puppet/puppet.conf.

masterless

A boolean switch to enable or disable the masterless setup of PuppetDB. Defaults to false.

terminus_package

Name of the package to use that represents the PuppetDB terminus code. Defaults to puppetdb-termini, when puppetdb_version is set to <= 2.3.x the default changes to puppetdb-terminus.

puppet_service_name

Name of the service that represents Puppet. You can change this to apache2 or httpd depending on your operating system, if you plan on having Puppet run using Apache/Passenger for example.

puppetdb_startup_timeout

The maximum amount of time that the module should wait for PuppetDB to start up. This is most important during the initial install of PuppetDB (defaults to 15 seconds).

restart_puppet

If true, the module will restart the Puppet master when PuppetDB configuration files are changed by the module. Defaults to true. If set to false, you must restart the service manually in order to pick up changes to the config files (other than puppet.conf).

puppetdb::database::postgresql

The puppetdb::database::postgresql class manages a PostgreSQL server for use by PuppetDB. It can manage the PostgreSQL packages and service, as well as creating and managing the PuppetDB database and database user accounts.

class { 'puppetdb::database::postgresql':
  listen_addresses => 'my.postgres.host.name',
}

listen_addresses

The listen_address is a comma-separated list of hostnames or IP addresses on which the postgres server should listen for incoming connections. This defaults to localhost. This parameter maps directly to PostgreSQL's listen_addresses config option. Use a * to allow connections on any accessible address.

database_name

Sets the name of the database. Defaults to puppetdb.

database_username

Creates a user for access the database. Defaults to puppetdb.

database_password

Sets the password for the database user above. Defaults to puppetdb.

manage_server

Conditionally manages the PostgreSQL server via postgresql::server. Defaults to true. If set to false, this class will create the database and user via postgresql::server::db but not attempt to install or manage the server itself.

test_url

The URL to use for testing if the PuppetDB instance is running. Defaults to /pdb/meta/v1/version.

manage_package_repo

If true, the official postgresql.org repo will be added and postgres won't be installed from the regular repository. Defaults to true.

postgres_version

If the postgresql.org repo is installed, you can install several versions of postgres. Defaults to 9.6 in module version 6.0+ and 9.4 in older versions.

Implementation

Resource overview

In addition to the classes and variables mentioned above, PuppetDB includes:

puppetdb::master::routes

Configures the Puppet master to use PuppetDB as the facts terminus. WARNING: the current implementation simply overwrites your routes.yaml file; if you have an existing routes.yaml file that you are using for other purposes, you should not use this.

class { 'puppetdb::master::routes':
  puppet_confdir => '/etc/puppet'
}

The optional parameter routes can be used to specify a custom route configuration. For example to configure routes for masterless puppet.

class { 'puppetdb::master::routes':
  routes => {
    'apply' => {
      'facts' => {
        'terminus' => 'facter',
        'cache'    => 'puppetdb_apply',
      }
    }
  }
}

puppetdb::master::storeconfigs

Configures the Puppet master to enable storeconfigs and to use PuppetDB as the storeconfigs backend.

class { 'puppetdb::master::storeconfigs':
  puppet_conf => '/etc/puppet/puppet.conf'
}

puppetdb::server::validate_db

Validates that a successful database connection can be established between the node on which this resource is run and the specified PuppetDB database instance (host/port/user/password/database name).

puppetdb::server::validate_db { 'validate my puppetdb database connection':
  database_host     => 'my.postgres.host',
  database_username => 'mydbuser',
  database_password => 'mydbpassword',
  database_name     => 'mydbname',
}

Custom Types

puppetdb_conn_validator

Verifies that a connection can be successfully established between a node and the PuppetDB server. Its primary use is as a precondition to prevent configuration changes from being applied if the PuppetDB server cannot be reached, but it could potentially be used for other purposes such as monitoring.

Limitations

Currently, PuppetDB is compatible with:

Puppet Version: 4.10+

Platforms:

• EL 5, 6, 7
• Debian 6, 7
• Ubuntu 10.04, 12.04, 14.04

Community Maintained Platforms:

• Archlinux
• OpenBSD 5.6-current and newer
• SLES 11 SP1

Development

Puppet Labs modules on the Puppet Forge are open projects, and community contributions are essential for keeping them great. We can’t access the huge number of platforms and myriad of hardware, software, and deployment configurations that Puppet is intended to serve.

We want to keep it as easy as possible to contribute changes so that our modules work in your environment. There are a few guidelines that we need contributors to follow so that we can have a chance of keeping on top of things.

You can read the complete contribution guide.

puppetlabs-puppetdb changelog

Release notes for the puppetlabs-puppetdb module.

7.12.0 - 2022/12/13

• Grant read role to write user to fix database user permissions issue PDB-5559

7.11.0 - Not Released

7.10.0 - 2021/12/16

• Add support for Debian 11
• Allow puppetlabs/stdlib 8.0.0
• Default to PostgreSQL 11 when using PuppetDB 7.0.0 or later
• Update minimum version of puppetlabs/postgresql module to 6.5.0

7.9.0 - 2021/06/23

• When manage_database is true, it will create a read-only user in postgres and configure PuppetDB to use that user for its read-database connection pool
• Update module dependencies for inifile, firewall, and stdlib

7.8.0 - 2021/03/25

• Added an option postgresql_ssl_on to enable an SSL connection between PostgreSQL and PuppetDB using Puppet agent certificates to verify the connection and authorize PuppetDB to access the puppetdb database.
• Update our metadata to allow puppetlabs-postgresql 7 (this fixes an issue on el8)

7.7.1 - 2020/12/15

• When using Puppet 7 or newer, the connection validator will use the new HTTP client. This removes a deprecation warning in the agent output.

7.7.0 - 2020/11/05

• When applied to a node running puppet 7.0.0 or newer, the puppetdb::master::config class will default to the json fact cache. See PUP-10656 for more information.

7.6.0 - 2020/09/02

• Added migrate parameter to manage the database.ini config option
• Added Ubuntu 20.04 LTS as a supported platform

7.5.0 - 2020/06/10

• Added java_bin parameter to set the full path to the java bin
• Added node_purge_gc_batch_limit parameter
• Added facts_blacklist parameter to manage the database.ini config option
• Added manage_db_password and manage_read_db_password parameters
• Updated functions to use puppet4 functions
• Added enable_storeconfigs parameter, specifies whether or not the manage the master's storeconfigs (default: true)

7.4.0 - 2019/06/14

This is a minor feature release.

Detailed changes:

• Add the manage_database parameter to skip database and extension creation

7.3.0 - 2019/06/14

This is a minor feature release.

Detailed changes:

• Update module dependencies for firewall and stdlib

7.2.0 - 2019/05/17

This is a minor feature release.

Detailed changes:

• Update module dependencies for inifile and PostgreSQL

7.1.0 - 2018/10/02

This is a minor feature release.

Detailed changes:

• Fix issue with DLO path default being hardcoded
• Update module dependencies to allow compatibility with Puppet 6

7.0.1 - 2018/07/30

This is a minor bugfix release.

Detailed changes:

• Update the upper bound of required puppet version in metadata.json (Thanks @ekohl!)

7.0.0 - 2018/06/27

This is a major release that replaces validate_* methods with data types. The minimum required version of puppetlabs/stdlib has been bummped to 4.13.1 in order to get the new data types. Thanks very much to @bastelfreak for your submissions!

Detailed changes:

• Require puppetlabs/stdlib >= 4.13.1
• Bump puppet-lint to version 2
• Bump minimal recommended puppet4 version to 4.7.1
• Replace uses of validate_* methods in favor of data types (Thanks @bastelfreak!)
• Add data type for ttl (Thanks @bastelfreak!)
• Update list of supported platforms
• Retire the previously deprecated database_ssl and read_database_ssl params in favor of jdbc_ssl_properties and read_database_jdbc_ssl_properties

6.0.2 - 2017/11/06

This is a minor bugfix release.

Detailed changes:

• Update the upper bound of the puppetlabs inifile dependency
• Explicitly add database dependency in the PostgreSQL manifest (Thanks @pgassmann!)

6.0.1 - 2017/06/05

This is a minor bugfix release.

Detailed changes:

• Update the required puppet version in metadata.json

6.0.0 - 2017/06/05

This is a major release to support PuppetDB 5.0. Note that the default PostgreSQL version is now 9.6, the minimum required by PuppetDB 5.0. If you're running an older version, be sure to explicitly specifying it when upgrading the module so it doesn't get upgraded out from under you.

Detailed changes:

• Require Puppet >= 4.7
• If unspecified, install PostgreSQL version 9.6
• Default node-ttl and node-purge ttl to 7 days and 14 days, respectively.
• Support puppetlabs-postgresql version 5.x (Thanks @dhollinger!)
• Add create_service_resource param to avoid duplicate resource errors in some situations. (Thanks @kpaulisse!)
• Configure the master service as 'enabled' when it is automatically added (Thanks @tampakrap!)
• Add concurrent_writes parameter (Thanks @aperiodic!)
• Add cipher_suites option to configure jetty's SSL support (Thanks @selyx!)
• Add support for Ruby 2.3.1 (Thanks @ghoneycutt!)
• Specify mode of routes.yaml (Thanks @tampakrap!)
• Add [read_]database_max_pool_size parameter (Thanks @kpaulisse and @vine77!)
• Fix user/group names on OpenBSD (Thanks @buzzdeee!)
• Enforce permissions of managed ini files (Thanks @kbarber!)
• Manage the pg_trgm database extension (Thanks @PascalBourdier!)
• Default open_ssl_listen_port to undef instead of true (Thanks @mmckinst!)

5.1.2 - 2016/03/14

This is a minor bugfix release.

Detailed changes:

• Support RHEL upgrades from the puppetdb-terminus (<= PuppetDB 2) to the puppetdb-termini (>= PuppetDB 3).

5.1.1 - 2016/02/09

This is a minor bugfix release.

Detailed changes:

• Revert a change to 'puppetdb-terminus' installation process that occurred in the last release.

5.1.0 - 2016/02/09

This is a minor feature release.

Detailed changes:

• Use 'puppetdb-terminus' as the terminus package on RHEL, to avoid packaging conflicts that could occur on upgrades from 2.x to 3.x. The 'puppetdb-terminus' version 3.x package on RHEL will install 'puppetdb-termini' as a dependency.
• Add jdbc_ssl_properties parameter.
• Pass 'dport' parameter to puppetlabs/firewall instead of the deprecated 'port'.
• Pass database_port parameter to the postgresql class.
• Manage the puppetdb vardir.
• Allow default java_args to be overridden.
• Linting fixes.

5.0.0 - 2015/07/08

This is a major release to provide default support for PuppetDB 3.0.0, so lots of changes have been introduced. Ensure you read the upgrade guide provided in the README before upgrading to this release.

Detailed changes:

• Packaging paths by default favour the PDB 3.0.0 AIO paths now.
• Added legacy handling for old terminus & service versions (see upgrade guide in README for details)
• PDB 3.0.0 introduces new pathing for the API requests, so all the defaults for this module are switched to use that now.
• Support for Puppet 4 added.
• manage_pg_repo is now on by default when using the puppetlabs/postgresql module, as PDB 3.0.0 supports only 9.4. This enables the use of the upstream PGDG PostgreSQL repos for all distros to obtain a working version of 9.4. The option can be disabled if required.
• Default ssl-host is now 0.0.0.0

4.3.0 - 2015/06/10

This is a minor feature release.

Detailed changes:

• Feature: Provide database_embedded_path option for overriding HSQLDB file path.
• Feature: Add ability to manage command_threads, store_usage and temp_usage.
• Bug: allow database_validation to be false
• Bug: Fix ordering issues with read_database_ini
• Testing: Fix file_concat dependency and fix rspec warnings

4.2.1 - 2015/04/07

This is a minor bugfix release.

Detailed Changes:

• Ignore ._foo files when building the .tar.gz of the module.

4.2.0 - 2015/04/02

This is a minor feature release.

Detailed Changes:

• Added Puppet 4 compatibility by introspecting the value for $puppet_confdir.
• Added masterless param switch to enable or disable the masterless setup of PuppetDB.
• Added manage_package_repo param which will setup the official PostgreSQL repositories on your host.
• Added FreeBSD support.
• The puppetdb service now restarts if the certificates change.
• manage_firewall and ssl_protocols are now configurable through the top-level puppetdb class.
• Show the puppetdb server URI scheme in connection errors.
• test_url param is now properly passed from the resource to the provider.
• Removed dead PE code and unused variables from the module.
• New parameter puppetdb_disable_ssl to enable validation to use cleartext.
• Database validation is now optional via the database_validate and read_database_validate params.
• Documentation updates to the README and metadata.json.

4.1.0 - 2014/11/13

This is a minor feature release.

Detailed Changes:

• New capabilities added for installing SSL certificates and keys.
• New parameter puppetdb_disable_ssl to enable validation to use cleartext.
• ssl_protocols now provided to allow users to fine tune what protocols they want to support for PuppetDB.
• Lots of documentation and parameter cleanups, to ensure consistency.
• test_url is now supported for puppetdb::master::config to allow the URL one uses to be overridden.
• Corrected PE detection support.
• Correct the path for HSQLDB to use /var/lib/puppetdb/db instead of /usr/share/puppetdb/db as is standard in PuppetDB core.

4.0.0 - 2014/09/16

For this release, all dependency versions have been bumped to their latest.

Detailed Changes:

• The PuppetDB module now only supports Puppet 3.7.1 or later
• 'puppetlabs/postgresql' 4.0.0 or later is now required
• 'puppetlabs/inifile' 1.1.3 or later is now required
• 'puppetlabs/firewall' 1.1.3 or later is now required
• 'puppetlabs/stdlib' 4.2.2 or later is now required
• The parameter manage_firewall for the class puppetdb::database::postgresql has now been removed, since the postgresql module no longer supports this.
• The parameter open_postgres_port for the class puppetdb has also been removed, due to postgresql changes.

3.0.1 - 2014/02/11

This release contains only minor bug fixes.

Detailed Changes:

• Add missing PUBLISHER_LOGIN variable for auto-publish. (Ashley Penney)
• fix validation regular expressions for time configs (Scott Duckworth)
• update ripienaar/concat -> puppetlabs/concat (Joshua Hoblitt)
• Fix issue with validator when disable_ssl = true (Elliott Barrere)
• Enable soft_write_failure setting when $puppetdb::disablessl = true (Elliott Barrere)
• Support rspec-puppet v1.0.0 (Garrett Honeycutt)
• Pin rspec-puppet to 1.x releases (Ken Barber)
• Define parameter in puppetdb class to define postgres listen address (Adrian Lopez)
• Enable fast finish in Travis (Garrett Honeycutt)
• Convert tests to beaker (Ashley Penney)
• Use the /v2 metrics endpoint instead of /metrics (Ken Barber)

3.0.0 - 2013/10/27

This major release changes the main dependency for the postgresql module from version 2.5.x to 3.x. Since the postgresql module is not backwards compatible, this release is also not backwards compatible. As a consequence we have taken some steps to deprecate some of the older functionality:

• The parameter manage_redhat_firewall for the class puppetdb has now been removed completely in favor of open_postgres_port and open_ssl_listen_port.
• The parameter manage_redhat_firewall for the class puppetdb::database::postgresql, has now been renamed to manage_firewall.
• The parameter manage_redhat_firewall for the class puppetdb::server has now been removed completely in favor of open_listen_port and open_ssl_listen_port.
• The internal class: puppetdb::database::postgresql_db has been removed. If you were using this, it is now defunct.
• The class puppetdb::server::firewall has been marked as private, do not use it directly.
• The class puppetdb::server::jetty_ini and puppetdb::server::database_ini have been marked as private, do not use it directly.

All of this is documented in the upgrade portion of the README.

Additionally some features have been included in this release as well:

• soft_write_failure can now be enabled in your puppetdb.conf with this module to handle failing silently when your PuppetDB is not available during writes.
• There is a new switch to enable SSL connectivity to PostgreSQL. While this functionality is only in its infancy this is a good start.

Detailed Changes:

• FM-103: Add metadata.json to all modules. (Ashley Penney)
• Add soft_write_failure to puppetdb.conf (Garrett Honeycutt)
• Add switch to configure database SSL connection (Stefan Dietrich)
• (GH-91) Update to use rspec-system-puppet 2.x (Ken Barber)
• (GH-93) Switch to using puppetlabs-postgresql 3.x (Ken Barber)
• Fix copyright and project notice (Ken Barber)
• Adjust memory for PuppetDB tests to avoid OOM killer (Ken Barber)
• Ensure ntpdate executes early during testing (Ken Barber)

2.0.0 - 2013/10/04

This major release changes the main dependency for the inifile module from the deprecated cprice404/inifile to puppetlabs/inifile to remove deprecation warnings and to move onto the latest and greatest implementation of that code.

Its a major release, because it may affect other dependencies since modules cannot have overlapping second part dependencies (that is inifile cannot be from two different locations).

It also adds the parameter puppetdb_service_status to the class puppetdb to allow users to specify whether the module manages the puppetdb service for you.

The database_password parameter is now optional, and initial Arch Linux support has been added.

Detailed Changes:

• (GH-73) Switch to puppetlabs/inifile from cprice/inifile (Ken Barber)
• Make database_password an optional parameter (Nick Lewis)
• add archlinux support (Niels Abspoel)
• Added puppetdb service control (Akos Hencz)

1.6.0 - 2013/08/07

This minor feature release provides extra parameters for new configuration items available in PuppetDB 1.4, and also provides some older parameters that were missed previously:

• gc_interval
• log_slow_statements
• conn_max_age
• conn_keep_alive
• conn_lifetime

Consult the README.md file, or the PuppetDB documentation for more details.

1.5.0 - 2013/07/18

This minor feature release provides the following new functionality:

• The module is now capable of managing PuppetDB on SUSE systems for which PuppetDB packages are available
• The ruby code for validating the PuppetDB connection now supports validating on a non-SSL HTTP port.

1.4.0 - 2013/05/13

This feature release provides support for managing the puppetdb report processor on your master.

To enable the report processor, you can do something like this:

class { 'puppetdb::master::config':
    manage_report_processor => true,
    enable_reports => true
}

This will add the 'puppetdb' report processor to the list of reports inside your master's puppet.conf file.

1.3.0 - 2013/05/13

This feature release provides us with a few new features for the PuppetDB module.

You can now disable SSL when using the puppetdb class by using the new parameter disable_ssl:

class { 'puppetdb':
  disable_ssl => true,
}

This will remove the SSL settings from your jetty.ini configuration file disabling any SSL communication. This is useful when you want to offload SSL to another web server, such as Apache or Nginx.

We have now added an option java_args for passing in Java options to PuppetDB. The format is a hash that is passed in when declaring the use of the puppetdb class:

class { 'puppetdb':
  java_args => {
    '-Xmx' => '512m',
    '-Xms' => '256m',
  }
}

Also, the default report-ttl was set to 14d in PuppetDB to align it with an upcoming PE release, so we've also reflected that default here now.

And finally we've fixed the issue whereby the options report_ttl, node_ttl, node_purge_ttl and gc_interval were not making the correct changes. On top of that you can now set these values to zero in the module, and the correct time modifier (s, m, h etc.) will automatically get applied for you.

Behind the scenes we've also added system and unit testing, which was previously non-existent. This should help us reduce regression going forward.

Thanks to all the contributing developers in the list below that made this release possible :-).

Changes

• Allows for 0 _ttl's without time signifier and enables tests (Garrett Honeycutt)
• Add option to disable SSL in Jetty, including tests and documentation (Christian Berg)
• Cleaned up ghoneycutt's code a tad (Ken Barber)
• the new settings report_ttl, node_ttl and node_purge_ttl were added but they are not working, this fixes it (fsalum)
• Also fix gc_interval (Ken Barber)
• Support for remote puppetdb (Filip Hrbek)
• Added support for Java VM options (Karel Brezina)
• Add initial rspec-system tests and scaffolding (Ken Barber)

1.2.1 - 2013/04/08

This is a minor bugfix that solves the PuppetDB startup exception:

java.lang.AssertionError: Assert failed: (string? s)

This was due to the default node-ttl and node-purge-ttl settings not having a time suffix by default. These settings required 's', 'm', 'd' etc. to be suffixed, even if they are zero.

Changes

• (Ken Barber) Add 's' suffix to period settings to avoid exceptions in PuppetDB

1.2.0 - 2013/04/05

This release is primarily about providing full configuration file support in the module for PuppetDB 1.2.0. (The alignment of version is a coincidence I assure you :-).

This feature release adds the following new configuration parameters to the main puppetdb class:

• node_ttl
• node_purge_ttl (available in >=1.2.0)
• report_ttl

Consult the README for futher details about these new configurable items.

Changes

• (Nick Lewis) Add params and ini settings for node/purge/report ttls and document them

1.1.5

2013-02-13 - Karel Brezina

• Fix database creation so database_username, database_password and database_name are correctly passed during database creation.

2013-01-29 - Lauren Rother

• Change README to conform to new style and various other README improvements

2013-01-17 - Chris Price

• Improve documentation in init.pp

1.1.4

This is a bugfix release, mostly around fixing backward-compatibility for the deprecated manage_redhat_firewall parameter. It wasn't actually entirely backwards-compatible in the 1.1.3 release.

2013-01-17 - Chris Price chris@puppetlabs.com

• Fix backward compatibility of manage_redhat_firewall parameter (de20b44)

2013-01-16 - Chris Price chris@puppetlabs.com

• Fix deprecation warnings around manage_redhat_firewall (448f8bc)

1.1.3

This is mostly a maintenance release, to update the module dependencies to newer versions in preparation for some new features. This release does include some nice additions around the ability to set the listen address for the HTTP port on Jetty and manage the firewall for that port. Thanks very much to Drew Blessing for those submissions!

2013-01-15 - Chris Price chris@puppetlabs.com

• Update Modulefile for 1.1.3 release (updates dependencies on postgres and inifile modules to the latest versions) (76bfd9e)

2012-12-19 - Garrett Honeycutt garrett@puppetlabs.com

• (#18228) updates README for style (fd2e990)

2012-11-29 - Drew Blessing Drew.Blessing@Buckle.com

• 17594 - Fixes suggested by cprice-puppet (0cf9632)

2012-11-14 - Drew Blessing Drew.Blessing@Buckle.com

• Adjust examples in tests to include new port params (0afc276)

2012-11-13 - Drew Blessing Drew.Blessing@Buckle.com

• 17594 - PuppetDB - Add ability to set standard host listen address and open firewall

1.1.2

2012-10-26 - Chris Price chris@puppetlabs.com (1.1.2)

• 1.1.2 release

2012-10-26 - Chris Price chris@puppetlabs.com

• Add some more missing inherits for puppetdb::params (a72cc7c)

2012-10-26 - Chris Price chris@puppetlabs.com (1.1.2)

• 1.1.1 release

2012-10-26 - Chris Price chris@puppetlabs.com (1.1.1)

• Add missing inherit for puppetdb::params (ea9b379)

2012-10-24 - Chris Price chris@puppetlabs.com

• 1.1.0 release

2012-10-24 - Chris Price chris@puppetlabs.com (1.1.0)

• Update postgres dependency to puppetlabs/postgresql (bea79b4)

2012-10-17 - Reid Vandewiele reid@puppetlabs.com (1.1.0)

• Fix embedded db setup in Puppet Enterprise (bf0ab45)

2012-10-17 - Chris Price chris@puppetlabs.com (1.1.0)

• Update manifests/master/config.pp (b119a30)

2012-10-16 - Chris Price chris@puppetlabs.com (1.1.0)

• Make puppetdb startup timeout configurable (783b595)

2012-10-01 - Hunter Haugen h.haugen@gmail.com (1.1.0)

• Add condition to detect PE installations and provide different parameters (63f1c52)

2012-10-01 - Hunter Haugen h.haugen@gmail.com (1.1.0)

• Add example manifest code for pe puppet master (a598edc)

2012-10-01 - Chris Price chris@puppetlabs.com (1.1.0)

• Update comments and docs w/rt PE params (b5df5d9)

2012-10-01 - Hunter Haugen h.haugen@gmail.com (1.1.0)

• Adding pe_puppetdb tests class (850e039)

2012-09-28 - Hunter Haugen h.haugen@gmail.com (1.1.0)

• Add parameters to enable usage of enterprise versions of PuppetDB (df6f7cc)

2012-09-23 - Chris Price chris@puppetlabs.com

• 1.0.3 release

2012-09-23 - Chris Price chris@puppetlabs.com

• Add a parameter for restarting puppet master (179b337)

2012-09-21 - Chris Price chris@puppetlabs.com

• 1.0.2 release

2012-09-21 - Chris Price chris@puppetlabs.com

• Pass 'manage_redhat_firewall' param through to postgres (f21740b)

2012-09-20 - Chris Price chris@puppetlabs.com

• 1.0.1 release

2012-09-20 - Garrett Honeycutt garrett@puppetlabs.com

• complies with style guide (1aab5d9)

2012-09-19 - Chris Price chris@puppetlabs.com

• Fix invalid subname in database.ini (be683b7)

2011-09-18 Chris Price chris@puppetlabs.com - 1.0.0

• Initial 1.0.0 release