Forge Home

Modules

Puppet

Resources

PuppetEcosystemPuppet CommunityUpdates

reboot

Adds a type and provider for managing system reboots.
Project URLRSS FeedReport issues

3,331,126 downloads

56,881 latest version

5.0 quality score

We run a couple of automated
scans to help you access a
module's quality. Each module is
given a score based on how well
the author has formatted their
code and documentation and
modules are also checked for
malware using VirusTotal.

Please note, the information below
is for guidance only and neither of
these methods should be considered
an endorsement by Puppet.

Version information

  • 5.0.0 (latest)
  • 4.3.1
  • 4.3.0
  • 4.2.0
  • 4.1.0
  • 4.0.2
  • 4.0.1
  • 4.0.0
  • 3.2.0
  • 3.1.0
  • 3.0.0
  • 2.4.0
  • 2.3.0
  • 2.2.0
  • 2.1.2
  • 2.1.1
  • 2.0.0
  • 1.2.1
  • 1.2.0
  • 1.1.0
  • 1.0.0
  • 0.1.9
  • 0.1.8
  • 0.1.7
  • 0.1.6
  • 0.1.5
  • 0.1.4
  • 0.1.2
  • 0.1.1
  • 0.1.0
released Apr 24th 2023
Passed malware scan
This version is compatible with:
  • Puppet Enterprise 2023.8.x, 2023.7.x, 2023.6.x, 2023.5.x, 2023.4.x, 2023.3.x, 2023.2.x, 2023.1.x, 2023.0.x, 2021.7.x, 2021.6.x, 2021.5.x, 2021.4.x, 2021.3.x, 2021.2.x, 2021.1.x, 2021.0.x
  • Puppet >= 7.0.0 < 9.0.0
  • , , , , , , , , , ,
Tasks:
  • reboot
  • last_boot_time
Plans:
  • reboot

Start using this module

  • r10k or Code Manager
  • Bolt
  • Manual installation
  • Direct download

Add this module to your Puppetfile:

mod 'puppetlabs-reboot', '5.0.0'
Learn more about managing modules with a Puppetfile

Add this module to your Bolt project:

bolt module add puppetlabs-reboot
Learn more about using this module with an existing project

Manually install this module globally with Puppet module tool:

puppet module install puppetlabs-reboot --version 5.0.0

Direct download is not typically how you would use a Puppet module to manage your infrastructure, but you may want to download the module in order to inspect the code.

Download
Tags: windows, reboot

Documentation

puppetlabs/reboot — version 5.0.0 Apr 24th 2023

reboot

Build Status

Table of Contents

  1. Overview
  2. Module Description - What the reboot module does and why it is useful
  3. Setup - The basics of getting started with reboot
  4. Usage - Configuration options and additional functionality
  5. Reference - An under-the-hood peek at what the module is doing and how
  6. Limitations - OS compatibility, etc.
  7. Development - Guide for contributing to the module

Overview

This module adds a type, and both Windows and generic POSIX providers, for managing target reboots.

Module Description

Some packages require a reboot of the target to complete their installation. Until that reboot is completed, the package might not be fully functional, and other installs might fail. This module provides a resource type to let Puppet perform that reboot, and providers to support Windows and POSIX systems. HP-UX is not supported.

By default, this module only reboots a target in response to another resource being applied --- e.g., after a package install. On Windows targets, you can also have Puppet check for pending reboots and complete them before applying the next resource in the catalog, by specifying when => pending.

Setup

Setup Requirements

On Windows targets, the 'shutdown.exe' command must be in the PATH.

On Windows 2003 (non-R2) x64 targets, KB942589 must be installed.

Beginning with reboot

The reboot module should work right out of the box. To test it, install a package (in this case 'SomePackage') and set up the module to reboot as follows:

package { 'SomePackage':
  ensure          => installed,
  source          => '\\server\share\some_installer.exe',
  install_options => ['/Passive', '/NoRestart'],
}
reboot { 'after':
  subscribe       => Package['SomePackage'],
}

Usage

Complete any pending reboots before installing a package

reboot { 'before':
  when            => pending,
}
package { 'SomePackage':
  ensure          => installed,
  source          => '\\server\share\some_installer.exe',
  install_options => ['/Passive', '/NoRestart'],
  require         => Reboot['before'],
}

Install multiple packages before rebooting

By default, when this module triggers a reboot, it skips any resources in the catalog that have not yet been applied. To apply the entire catalog before rebooting, specify apply => finished. For example, if you have several packages that all require reboots, but will not block each other:

package { 'Microsoft .NET Framework 4.5':
  ensure => installed,
  ...
  notify => Reboot['after_run'],
}
package { 'Microsoft Windows SDK for Windows 7 (7.0)':
  ensure => installed,
  ...
  notify => Reboot['after_run'],
}
reboot { 'after_run':
  apply  => finished,
}

Reboot when certain conditions are met

This usage applies to Windows only.

When using when => pending, use onlyif or unless to specify the reasons for which to reboot.

reboot { 'reboot on file renames':
  when   => 'pending',
  onlyif => 'pending_file_rename_operations'
}

The possible reasons for rebooting are:

  • reboot_required: A reboot has manually been requested through the provider.
  • component_based_servicing: A new component has been installed.
  • windows_auto_update: An automatic update requested a reboot.
  • pending_file_rename_operations: There are files that need to be renamed at the next reboot.
  • package_installer: A software update requested a reboot.
  • package_installer_syswow64: A software update requested a reboot.
  • pending_computer_rename: The computer needs to be renamed.
  • pending_dsc_reboot: DSC has requested a reboot.
  • pending_ccm_reboot: CCM has requested a reboot.
  • pending_domain_join: System has joined domain and is pending a reboot.

Reference

Type: reboot

The main type of the module, responsible for all its functionality.

Providers

  • windows: Default for :operatingsystem => :windows
  • linux: Deprecated. Use posix instead.
  • posix: Default for :feature => :posix

Features

  • manages_reboot_pending: Detects whether a reboot is pending due to a prior change. If so, reboot the target. (Available with the windows provider.)

Parameters

apply

Optional. Specifies when to apply the reboot. If set to 'immediately', the provider stops applying additional resources and performs the reboot as soon as Puppet finishes syncing. If set to 'finished', it continues applying resources and then performs the reboot at the end of the run. Valid options: 'immediately' and 'finished'. Default value: 'immediately'.

Note: With the default setting of 'immediately', resources further down in the catalog are skipped and recorded as such. (In Puppet versions prior to 3.3.0, they're left out of the report entirely.) The next time Puppet runs, it processes the skipped resources normally, and they might trigger additional reboots.

message

Optional. Provides a message to log when the reboot is performed. Valid options: a string. Default value: undefined.

name

Required. Sets the name of the reboot resource. Valid options: a string.

timeout

Optional. Sets the number of seconds to wait after the Puppet run completes for the reboot to happen. If the timeout is exceeded, the provider cancels the reboot. Valid options: any positive integer. Default value: '60'.

Note: POSIX systems (with the exception of Solaris) only support specifying the timeout as minutes. As such, the value of timeout must be a multiple of 60. Other values will be rounded up to the nearest minute and a warning will be issued.

when

Optional. Specifies how reboots are triggered. If set to 'refreshed', the provider only reboots the target in response to a refresh event from another resource, e.g., installing a package. If set to 'pending', Puppet checks for signs of any pending reboots and completes them before applying the next resource in the catalog. Valid options: 'refreshed' and 'pending'. Default value: 'refreshed'.

Note: For when => pending reboots, Puppet can normally detect a pending reboot based on some specific system conditions (such as the existence of the PendingFileRenameOperations registry key). However, if those conditions aren't resolved after the target reboots, Puppet triggers another reboot. This can lead to a reboot loop.

onlyif

Optional. Applies a pending reboot only for the specified reasons. This can take a single reason or an array of reasons.

See the Reboot when certain conditions are met section for reasons why you might reboot.

unless

Optional. Ignores the specified reasons when checking for a pending reboot. This can take a single reason or an array of reasons.

See the Reboot when certain conditions are met section for reasons why you might reboot.

Plan: reboot

This plan is intended to be used as part of other plans and allows Bolt to wait for a server to reboot before continuing. It requires Bolt 1.0+ and/or PE 2019.0+.

NOTE: The nodes parameters is deprecated in Bolt 2.0, and has been updated here to targets. This breaks plans or workflows that explicitly call the nodes parameter, however this module is still compatible with Bolt 1.x specifying the targets parameter instead.

Here is an example of using this module to reboot servers, wait for them to come back, then check the status of a service:

plan myapp::patch (
  TargetSpec $servers,
  TargetSpec $version,
) {
  # Upgrade the application
  run_task('myapp::upgrade', $servers, { 'version' => $version })

  # Reboot the servers. This app is slow to shut down so give them 5 minutes to reboot.
  run_plan('reboot', $servers, reconnect_timeout => 300)

  # Check the status of the service
  return run_task('service', $servers, {
    'name'   => 'myapp',
    'action' => 'status',
  })
}

Return value

The reboot plan returns a ResultSet on success. It also returns a ResultSet if fail_plan_on_errors is false.

The plan may raise an Error if any targets fail to reboot and fail_plan_on_errors is set to true. In that circumstance, the error raised will contain the ResultSet in its details key.

$plan_result = run_plan('reboot', targets => $targets)
$results = case $plan_result {
  Error:   { $plan_result.details['result_set'] }
  default: { $plan_result }
}

$results.ok_set.targets    # Targets that successfully rebooted
$results.error_set.targets # Targets that did not successfully reboot

Parameters

targets

A TargetSpec object containing all targets to wait for.

message

An optional message to log when rebooting.

reboot_delay

How long (in seconds) to wait before shutting down. Defaults to 0, shutdown immediately.

disconnect_wait

How long (in seconds) to wait before checking whether the server has rebooted. Defaults to 1.

reconnect_timeout

How long (in seconds) to attempt to reconnect before giving up. Defaults to 180.

retry_interval

How long (in seconds) to wait between retries. Defaults to 1.

fail_plan_on_errors

Whether or not to raise an exception if any targets fail to reboot. Defaults to true.

Setting this value to false allows the return value of a plan to be treated the same way a task return value with _catch_errors => true would be treated.

plan myapp::patch (
  TargetSpec $targets,
  String     $version,
) {
  $target_objects = get_targets($targets)

  # Upgrade the application
  $step1_results = run_task('myapp::upgrade', $target_objects,
    version       => $version,
    _catch_errors => true,
  )

  # Reboot the servers. This app is slow to shut down so give them 5 minutes to reboot.
  $step2_results = run_plan('reboot', targets => $step1_results.ok_set.targets,
    reconnect_timeout   => 300
    fail_plan_on_errors => false,
  )

  # Check the status of the service
  $step3_results = run_task('service', $step2_results.ok_set.targets,
    name          => 'myapp',
    action        => 'status',
    _catch_errors => true,
  )

  return({
    'errored-at-step1' => $step1_results.error_set.names,
    'errored-at-step2' => $step2_results.error_set.names,
    'errored-at-step3' => $step3_results.error_set.names,
    'succeeded'        => $step3_results.ok_set.names,
  }.filter |$_, $names| { ! $names.empty })
}

Limitations

For an extensive list of supported operating systems, see metadata.json

Development

Puppet Labs modules on the Puppet Forge are open projects, and community contributions are essential for keeping them great. We can’t access the huge number of platforms and myriad of hardware, software, and deployment configurations that Puppet is intended to serve.

We want to keep it as easy as possible to contribute changes so that our modules work in your environment. There are a few guidelines that we need contributors to follow so that we can have a chance of keeping on top of things.

For more information, see our module contribution guide.

Contributors

To see who's already involved, see the list of contributors.