Forge Home

Modules

Puppet

Resources

PuppetEcosystemPuppet CommunityUpdates

keepalived

Keepalived module
Project URLRSS FeedReport issues

164,701 downloads

2,844 latest version

4.7 quality score

We run a couple of automated
scans to help you access a
module's quality. Each module is
given a score based on how well
the author has formatted their
code and documentation and
modules are also checked for
malware using VirusTotal.

Please note, the information below
is for guidance only and neither of
these methods should be considered
an endorsement by Puppet.

Version information

  • 5.1.0 (latest)
  • 5.0.0
  • 4.1.0
  • 4.0.0
  • 3.6.0
  • 3.5.0
  • 3.4.0
  • 3.3.0
  • 3.2.0
  • 3.1.0
  • 3.0.0
  • 2.2.0
  • 2.1.0
  • 2.0.0
released Apr 16th 2024
This version is compatible with:
  • Puppet Enterprise 2023.8.x, 2023.7.x, 2023.6.x, 2023.5.x, 2023.4.x, 2023.3.x, 2023.2.x, 2023.1.x, 2023.0.x, 2021.7.x, 2021.6.x, 2021.5.x, 2021.4.x, 2021.3.x, 2021.2.x, 2021.1.x, 2021.0.x
  • Puppet >= 7.0.0 < 9.0.0
  • , , , , , ,

Start using this module

  • r10k or Code Manager
  • Bolt
  • Manual installation
  • Direct download

Add this module to your Puppetfile:

mod 'puppet-keepalived', '5.1.0'
Learn more about managing modules with a Puppetfile

Add this module to your Bolt project:

bolt module add puppet-keepalived
Learn more about using this module with an existing project

Manually install this module globally with Puppet module tool:

puppet module install puppet-keepalived --version 5.1.0

Direct download is not typically how you would use a Puppet module to manage your infrastructure, but you may want to download the module in order to inspect the code.

Download
Tags: keepalived, ipvs, vrrp, lvs, failover, loadbalancing, stonith

Documentation

puppet/keepalived — version 5.1.0 Apr 16th 2024

keepalived

License Build Status Puppet Forge Puppet Forge - downloads Puppet Forge - endorsement Puppet Forge - scores

Table of Contents

  1. Description
  2. Usage - Configuration options and additional functionality
  3. Limitations - OS compatibility, etc.
  4. Development - Guide for contributing to the module

Description

This puppet module manages keepalived. The main goal of keepalived is to provide simple and robust facilities for loadbalancing and high-availability to Linux system and Linux based infrastructures.

Usage

Basic IP-based VRRP failover

This configuration will fail-over when:

  1. Master node is unavailable
node /node01/ {
  include keepalived

  keepalived::vrrp::instance { 'VI_50':
    interface         => 'eth1',
    state             => 'MASTER',
    virtual_router_id => '50',
    priority          => '101',
    auth_type         => 'PASS',
    auth_pass         => 'secret',
    virtual_ipaddress => [ '10.0.0.1/29' ],
    track_interface   => ['eth1','tun0'], # optional, monitor these interfaces.
  }
}

node /node02/ {
  include keepalived

  keepalived::vrrp::instance { 'VI_50':
    interface         => 'eth1',
    state             => 'BACKUP',
    virtual_router_id => '50',
    priority          => '100',
    auth_type         => 'PASS',
    auth_pass         => 'secret',
    virtual_ipaddress => [ '10.0.0.1/29' ],
    track_interface   => ['eth1','tun0'], # optional, monitor these interfaces.
  }
}

or hiera:

---
keepalived::vrrp_instance:
  VI_50:
    interface: 'eth1'
    state: 'MASTER'
    virtual_router_id: 50
    priority: 101
    auth_type: 'PASS'
    auth_pass: 'secret'
    virtual_ipaddress: '10.0.0.1/29'
    track_interface:
      - 'eth1'
      - 'tun0'

Add floating routes

node /node01/ {
  include keepalived

  keepalived::vrrp::instance { 'VI_50':
    interface         => 'eth1',
    state             => 'MASTER',
    virtual_router_id => '50',
    priority          => '101',
    auth_type         => 'PASS',
    auth_pass         => 'secret',
    virtual_ipaddress => [ '10.0.0.1/29' ],
    virtual_routes    => [ { to   => '168.168.2.0/24', via => '10.0.0.2' },
                           { to   => '168.168.3.0/24', via => '10.0.0.3' } ],
    virtual_rules     => [ { from => '168.168.2.42', lookup => 'customroute' } ]
  }
}

hiera:

---
keepalived::vrrp_instance:
  VI_50:
    interface: 'eth1'
    state: 'MASTER'
    virtual_router_id: 50
    priority: 101
    auth_type: 'PASS'
    auth_pass: 'secret'
    virtual_ipaddress: '10.0.0.1/29'
    virtual_routes:
      - to: '168.168.2.0/24'
        via: '10.0.0.2'
      - to: 168.168.3.0/24'
        via: '10.0.0.3'
    virtual_rules:
      - from: '168.168.2.42'
        lookup: 'customroute'

Detect application level failure

This configuration will fail-over when:

  1. NGinX daemon is not running
  2. Master node is unavailable
node /node01/ {
  include keepalived

  keepalived::vrrp::script { 'check_nginx':
    script => '/usr/bin/killall -0 nginx',
  }

  keepalived::vrrp::instance { 'VI_50':
    interface         => 'eth1',
    state             => 'MASTER',
    virtual_router_id => '50',
    priority          => '101',
    auth_type         => 'PASS',
    auth_pass         => 'secret',
    virtual_ipaddress => '10.0.0.1/29',
    track_script      => 'check_nginx',
  }
}

node /node02/ {
  include keepalived

  keepalived::vrrp::script { 'check_nginx':
    script => '/usr/bin/killall -0 nginx',
  }

  keepalived::vrrp::instance { 'VI_50':
    interface         => 'eth1',
    state             => 'BACKUP',
    virtual_router_id => '50',
    priority          => '100',
    auth_type         => 'PASS',
    auth_pass         => 'secret',
    virtual_ipaddress => '10.0.0.1/29',
    track_script      => 'check_nginx',
  }
}

or hiera:

---
keepalived::vrrp_script:
  check_nginx:
    script: '/usr/bin/killall -0 nginx'

keepalived::vrrp_instance:
  VI_50:
    interface: 'eth1'
    state: 'MASTER'
    virtual_router_id: 50
    priority: 101
    auth_type: 'PASS'
    auth_pass: 'secret'
    virtual_ipaddress: '10.0.0.1/29'
    track_script: check_nginx

or using process tracking (keepalived 2.0.11+):

node /node01/ {
  include keepalived

  keepalived::vrrp::track_process { 'check_nginx':
    proc_name => 'nginx',
    weight    => 10,
    quorum    => 2,
    delay     => 10,
  }

  keepalived::vrrp::instance { 'VI_50':
    interface         => 'eth1',
    state             => 'MASTER',
    virtual_router_id => '50',
    priority          => '101',
    auth_type         => 'PASS',
    auth_pass         => 'secret',
    virtual_ipaddress => '10.0.0.1/29',
    track_process     => 'check_nginx',
  }
}

IPv4 and IPv6 virtual IP, with application level failure detection

This configuration will fail-over both the IPv4 address and the IPv6 address when:

  1. NGINX daemon is not running
  2. Master node is unavailable

It is not possible to configure both IPv4 and IPv6 addresses as virtual_ipaddresses in a single vrrp_instance; the reason is that the VRRP protocol doesn't support it. The two VRRP instances can both use the same virtual_router_id since VRRP IPv4 and IPv6 instances are completely independent of each other. Both nodes have state set to BACKUP, which will prevent them from entering MASTER state until the check script(s) have succeeded and the election has been held.

To ensure that the IPv4 and IPv6 vrrp_instances are always in the same state as each other, configure a vrrp_sync_group to include both the instances. The vrrp_sync_group require the global_tracking flag to be enabled to prevent keepalived from ignoring the tracking scripts for the vrrp_sync_group's vrrp_instance members.

Configure the vrrp_instance with the native_ipv6 flag to force the instance to use IPv6. An IPv6 vrrp_instance without the "native_ipv6" keyword does not configure the virtual IPv6 address with the "deprecated nodad" options.

RFC 3484, "Default Address Selection for Internet Protocol version 6 (IPv6)": Configure a /128 mask for the IPv6 address for keepliaved to set preferred_lft to 0 to avoid the VI to be used for outgoing connections.

RFC5798 section 5.2.9 requires that if the protocol is IPv6, then the first address must be the link local address of the virtual router.

IPv6 VRRP uses VRRP version 3, which does not support authentication, so the auth_type and auth_pass parameters are removed for the IPv6 VRRP instance.

node /node0x/ {
  keepalived::vrrp::script { 'check_nginx':
    script => '/usr/bin/pkill -0 nginx',
  }

  keepalived::vrrp::sync_group { 'VI_50':
    group               => [ 'VI_50_IPV4', 'VI_50_IPV6' ],
    global_tracking     => true,
  }

  keepalived::vrrp::instance { 'VI_50_IPV4':
    interface           => 'eth0',
    state               => 'BACKUP',
    virtual_router_id   => 50,
    priority            => 100,
    auth_type           => 'PASS',
    auth_pass           => 'secret',
    virtual_ipaddress   => '10.0.0.1/32',
    track_script        => 'check_nginx',
  }

  keepalived::vrrp::instance { 'VI_50_IPV6':
    interface           => 'eth0',
    state               => 'BACKUP',
    virtual_router_id   => 50,
    priority            => 100,
    virtual_ipaddress   => ['fe80::50/128', '2001:db8::50/128', ],
    track_script        => 'check_nginx',
    native_ipv6         => true,
  }
}

Global definitions

class { 'keepalived::global_defs':
  notification_email      => 'no@spam.tld',
  notification_email_from => 'no@spam.tld',
  smtp_server             => 'localhost',
  smtp_connect_timeout    => '60',
  router_id               => 'your_router_instance_id',
  bfd_rlimit_rttime       => 10000,
  checker_rlimit_rttime   => 10000,
  vrrp_rlimit_rttime      => 10000,
  bfd_priority            => -20,
  checker_priority        => -20,
  vrrp_priority           => -20,
  bfd_rt_priority         => 50,
  checker_rt_priority     => 50,
  vrrp_rt_priority        => 50,
  bfd_no_swap             => true,
  checker_no_swap         => true,
  vrrp_no_swap            => true,
  vrrp_version            => 3,
  max_auto_priority       => 99,
  vrrp_notify_fifo        => '/run/keepalived.fifo',
  vrrp_notify_fifo_script => 'your_fifo_script_path',
}

Soft-restart the Keepalived daemon

class { 'keepalived':
  service_restart => 'service keepalived reload',     # When using SysV Init
  # service_restart => 'systemctl reload keepalived', # When using SystemD
}

Opt out of having the service managed by the module

class { 'keepalived':
  service_manage => false,
}

Opt out of having the package managed by the module

class { 'keepalived':
  manage_package => false,
}

Opt out include unmanaged keepalived config files

If you need to include a Keepalived config fragment managed by another tool, include_external_conf_files takes an array of config path.

Caution: config file must be readable by Keepalived daemon

class { 'keepalived':
  include_external_conf_files => ['/etc/keepalived/unmanaged-config.cfg']
}

Unicast instead of Multicast

Caution: unicast support has only been added to Keepalived since version 1.2.8

By default Keepalived will use multicast packets to determine failover conditions. However, in many cloud environments it is not possible to use multicast because of network restrictions. Keepalived can be configured to use unicast in such environments:

Enable automatic unicast configuration with exported resources by setting parameter 'collect_unicast_peers => true'

Automatic unicast configuration:

  keepalived::vrrp::instance { 'VI_50':
    interface         => 'eth1',
    state             => 'BACKUP',
    virtual_router_id => '50',
    priority          => '100',
    auth_type         => 'PASS',
    auth_pass         => 'secret',
    virtual_ipaddress => '10.0.0.1/29',
    track_script      => 'check_nginx',
    collect_unicast_peers => true,
  }

Manual unicast configuration or override auto default IP:

  keepalived::vrrp::instance { 'VI_50':
    interface         => 'eth1',
    state             => 'BACKUP',
    virtual_router_id => '50',
    priority          => '100',
    auth_type         => 'PASS',
    auth_pass         => 'secret',
    virtual_ipaddress => '10.0.0.1/29',
    track_script      => 'check_nginx',
    unicast_source_ip => $::ipaddress_eth1,
    unicast_peers     => ['10.0.0.1', '10.0.0.2']
  }

The 'unicast_source_ip' parameter is optional as Keepalived will bind to the specified interface by default. This value will be exported in place of the default when 'collect_unicast_peers => true'. The 'unicast_peers' parameter contains an array of ip addresses that correspond to the failover nodes.

Creating ip-based virtual server instances with two real servers

This sets up a virtual server www.example.com that directs traffic to example1.example.com and example2.example.com by matching on an IP address and port.

keepalived::lvs::virtual_server { 'www.example.com':
  ip_address          => '1.2.3.4',
  port                => '80',
  delay_loop          => '7',
  lb_algo             => 'wlc',
  lb_kind             => 'DR',
  persistence_timeout => 86400,
  virtualhost         => 'www.example.com',
  protocol            => 'TCP'
}

keepalived::lvs::real_server { 'example1.example.com':
  virtual_server => 'www.example.com',
  ip_address     => '1.2.3.8',
  port           => '80',
  options        => {
    weight      => '1000',
    'TCP_CHECK' => {
       connection_timeout => '3',
    }
  }
}

keepalived::lvs::real_server { 'example2.example.com':
  virtual_server => 'www.example.com',
  ip_address     => '1.2.3.9',
  port           => '80',
  options        => {
    weight      => '1000',
    'TCP_CHECK' => {
       connection_timeout => '3',
    }
  }
}

or hiera:

---
keepalived::lvs_virtual_server:
  www.example.com:
    ip_address: '1.2.3.4'
    port: 80
    delay_loop: 7
    lb_algo: 'wlc'
    lb_kind: 'DR'
    persistence_timeout: 86400
    virtualhost: 'www.example.com'
    protocol: 'TCP'

keepalived::lvs_real_server:
  example1.example.com:
    virtual_server: 'www.example.com'
    ip_address: '1.2.3.8'
    port: 80
    options:
      weight: '1000'
      TCP_CHECK:
        connect_timeout: 3
  example2.example.com:
    virtual_server: 'www.example.com'
    ip_address: '1.2.3.9'
    port: 80
    options:
      weight: '1000'
      TCP_CHECK:
        connect_timeout: 3

Creating firewall mark based virtual server instances with two real servers

This sets up a virtual server www.example.com that directs traffic to example1.example.com and example2.example.com by matching on a firewall mark set in iptables or something similar.

keepalived::lvs::virtual_server { 'www.example.com':
  fwmark              => '123',
  delay_loop          => '7',
  lb_algo             => 'wlc',
  lb_kind             => 'DR',
  persistence_timeout => 86400,
  virtualhost         => 'www.example.com',
  protocol            => 'TCP'
}

keepalived::lvs::real_server { 'example1.example.com':
  virtual_server => 'www.example.com',
  ip_address     => '1.2.3.8',
  port           => '80',
  options        => {
    weight      => '1000',
    'TCP_CHECK' => {
       connection_timeout => '3',
    }
  }
}

keepalived::lvs::real_server { 'example2.example.com':
  virtual_server => 'www.example.com',
  ip_address     => '1.2.3.9',
  port           => '80',
  options        => {
    weight      => '1000',
    'TCP_CHECK' => {
       connection_timeout => '3',
    }
  }
}

Reference

Reference documentation coming soon.

Limitations

Details in metadata.json.

Development

The contributing guide is in CONTRIBUTING.md.

Release Notes/Contributors/Etc.

Details in CHANGELOG.md.

Migrated from https://github.com/arioch/puppet-keepalived to Vox Pupuli.