Forge Home

cisco_ios

Management of Cisco Catalyst (IOS, IOS-XE)

40,902 downloads

3,369 latest version

5.0 quality score

We run a couple of automated
scans to help you access a
module's quality. Each module is
given a score based on how well
the author has formatted their
code and documentation and
modules are also checked for
malware using VirusTotal.

Please note, the information below
is for guidance only and neither of
these methods should be considered
an endorsement by Puppet.

Version information

  • 2.0.0 (latest)
  • 1.3.0
  • 1.2.0
  • 1.1.0
  • 1.0.0
  • 0.6.2
  • 0.6.1
  • 0.6.0
  • 0.5.0
  • 0.4.0
  • 0.3.0
  • 0.2.0
  • 0.1.0
released Sep 10th 2019
This version is compatible with:
  • Puppet Enterprise 2019.8.x, 2019.7.x, 2019.5.x, 2019.4.x, 2019.3.x, 2019.2.x, 2019.1.x, 2019.0.x, 2018.1.x, 2017.3.x
  • Puppet >= 5.0.0 < 7.0.0
  • ,
Tasks:
  • cli_command
  • config_save
  • restore_startup

Start using this module

  • r10k or Code Manager
  • Bolt
  • Manual installation
  • Direct download

Add this module to your Puppetfile:

mod 'puppetlabs-cisco_ios', '1.1.0'
Learn more about managing modules with a Puppetfile

Add this module to your Bolt project:

bolt module add puppetlabs-cisco_ios
Learn more about using this module with an existing project

Manually install this module globally with Puppet module tool:

puppet module install puppetlabs-cisco_ios --version 1.1.0

Direct download is not typically how you would use a Puppet module to manage your infrastructure, but you may want to download the module in order to inspect the code.

Download

Documentation

puppetlabs/cisco_ios — version 1.1.0 Sep 10th 2019

cisco_ios

Table of Contents

  1. Module Description - What the module does and why it is useful
  2. Setup - The basics of getting started with cisco_ios
  3. Usage - Configuration options and additional functionality
  4. Reference - An under-the-hood peek at what the module is doing and how
  5. Limitations - OS compatibility, etc.
  6. Development - Guide for contributing to the module

Module Description

The Cisco IOS module allows for the configuration of Cisco Catalyst devices running IOS and IOS-XE.

Any changes made by this module affect the current running-config. These changes will lost on device reboot unless they are backed up to startup-config. This module provides a Puppet task to save running-config to startup-config.

Setup

What cisco_ios affects

This module installs the Net::SSH::Telnet gem; and Puppet Resource API gem, if necessary. To activate the Puppet Resource API gem, a reload of the puppetserver service is necessary. In most cases, this should happen automatically and cause little to no interruption to service.

Setup Requirements

Device access

This module requires a user that can access the device via SSH and that has the enable mode privilege.

Proxy Puppet agent

Since a Puppet agent is not available for the Catalysts (and, seriously, who would want to run an agent on them?) we need a proxy Puppet agent (either a compile master, or another agent) to run Puppet on behalf of the device.

Install dependencies

To install dependencies of the Cisco IOS module:

  1. Classify or apply the cisco_ios class on each master (master of masters, and if present, compile masters and replica master) that serves catalogs for this module.
  2. Classify or apply the cisco_ios class on each proxy Puppet agent that proxies for Cisco IOS devices.

Run puppet agent -t on the master(s) before using the module on the agent(s).

Beginning with cisco_ios with Bolt

Check out the Hands-on Lab for getting started with bolt.

Beginning with cisco_ios with Puppet

To get started, create or edit /etc/puppetlabs/puppet/device.conf on the proxy Puppet agent, add a section for the device (this will become the device's certname), specify a type of cisco_ios, and specify a url to a credentials file.

For example:

[cisco.example.com]
type cisco_ios
url file:////etc/puppetlabs/puppet/devices/cisco.example.com.conf`

The credentials file must contain a hash in HOCON format that matches the schema defined in lib/puppet/transport/schema/cisco_ios.rb for example:

host:            "10.0.0.246"
port:            22
user:            admin
password:        password
enable_password: password

To automate the creation of these files, use the device_manager module, the credentials section should follow the schema as described above:

device_manager { 'cisco.example.com':
  type        => 'cisco_ios',
  credentials => {
    host            => '10.0.0.246',
    port            => 22,
    user            => 'admin',
    password        => 'password',
    enable_password => 'password',
  },
}

(Using the device_manager module will also automatically classify the proxy Puppet agent with the cisco_ios class.)

Test your setup

Run puppet device on the proxy Puppet agent. For example:

puppet device --verbose --target cisco.example.com

Signing certificates

The first run of puppet device for a device will generate a certificate request:

Info: Creating a new SSL key for cisco.example.com
Info: Caching certificate for ca
Info: csr_attributes file loading from /opt/puppetlabs/puppet/cache/devices/cisco.example.com/csr_attributes.yaml
Info: Creating a new SSL certificate request for cisco.example.com
Info: Certificate Request fingerprint (SHA256): ...
Info: Caching certificate for ca

Unless autosign is enabled, the following (depending upon waitforcert) will be output:

Notice: Did not receive certificate
Notice: Did not receive certificate
Notice: Did not receive certificate
...

Or:

Exiting; no certificate found and waitforcert is disabled

On the master, execute the following to sign the certificate for the device:

  • Puppet 6 or later
puppetserver ca sign --certname cisco.example.com

This will output that the certificate for the device has been signed:

Successfully signed certificate request for cisco.example.com
  • Earlier versions of Puppet
puppet cert sign cisco.example.com

This will output that the certificate for the device has been signed:

Signing Certificate Request for:
  "cisco.example.com" (SHA256) ...
Notice: Signed certificate request for cisco.example.com
Notice: Removing file Puppet::SSL::CertificateRequest cisco.example.com at '/etc/puppetlabs/puppet/ssl/ca/requests/cisco.example.com.pem'

Note (Security Warning) The SSH server key, and hence its identity, will not be verified during the first connection attempt. Please follow up by verifying the SSH key for the device is correct. The fingerprint will be added to the known hosts file. By default this is the device cache directory eg. /opt/puppetlabs/puppet/cache/devices/cisco.example.com/ssl/known_hosts. This can be changed by setting the known_hosts_file value in the credentials file.

Usage

Create a manifest with the changes you want to apply. For example:

    ntp_server { '1.2.3.4':
      ensure => 'present',
      key => 94,
      prefer => true,
      minpoll => 4,
      maxpoll => 14,
      source_interface => 'Vlan 42',
    }

Note: The --apply and --resource options are only available with Puppet agent 5.5.0 and higher.

Run puppet device --apply on the proxy Puppet agent to apply the changes:

puppet device --target cisco.example.com --apply manifest.pp

Run puppet device --resource on the proxy Puppet agent to obtain the current values:

puppet device --target cisco.example.com --resource ntp_server

Tasks

To save the running config, it is possible to use the cisco_ios::config_save task. Before running this task, install the module on your machine, along with Puppet Bolt. When complete, execute the following command:

bolt task run cisco_ios::config_save --nodes ios --modulepath <module_installation_dir> --inventoryfile <inventory_yaml_path>

The following inventory file can be used to connect to your switch.

# inventory.yaml
nodes:
  - name: cisco.example.com
    alias: ios
    config:
      transport: remote
      remote:
        remote-transport: cisco_ios
        user: admin
        password: password
        enable_password: password

The --modulepath param can be retrieved by typing puppet config print modulepath.

NOTE: If you have only bolt installed, puppet config print does not exist. See https://puppet.com/docs/bolt/latest/installing_tasks_from_the_forge.html#task-8928 on how bolt can be used to install modules into your boltdir.

Type

Add new types to the type directory. We use the Resource API format Use the bundled ios_config example for guidance. Here is a simple example:

  require 'puppet/resource_api'

  Puppet::ResourceApi.register_type(
    name: 'new_thing',
    docs: 'Configure the new thing of the device',
    features: ['remote_resource'],
    attributes: {
      ensure:       {
        type:       'Enum[present, absent]',
        desc:       'Whether the new thing should be present or absent on the target system.',
        default:    'present',
      },
      name:         {
        type:      'String',
        desc:      'The name of the new thing',
        behaviour: :namevar,
      },
      # Other fields in resource API format
    },
  )

Provider

Add a provider — see existing examples. Parsing logic is contained in ios.rb. Regular expressions for parsing, getting and setting values, are contained within command.yaml.

Modes

If the new provider requires accessing a CLI "mode", for example, Interface (config-if), add this as a new mode state to Puppet::Transport::CiscoIos and an associated prompt to command.yaml.

Testing

There are 2 levels of testing found under spec.

Unit Testing

Unit tests test the parsing and command generation logic executed locally. Specs typically iterate over read_tests and update_tests, which contain testing values within test_data.yaml.

Execute with bundle exec rake spec.

Acceptance Testing

Acceptance tests are executed on actual devices.

Use test values and make sure that these are non-destructive.

Typically, the following flow is used:

  • Remove any existing entry
  • Add test
  • Edit test — with as many values as possible
  • Remove test

Any other logic or values that can be tested should be added, as appropriate.

Executing

Ensure that the IP address/hostname, username, password and enable password are specified as environment variables from your execution environment, for example:

export DEVICE_IP=10.0.10.20
export DEVICE_USER=admin
export DEVICE_PASSWORD="devicePa$$w0rd"
export DEVICE_ENABLE_PASSWORD="enablePa$$w0rd"

Execute the acceptance test suite with the following command:

bundle exec rspec spec/acceptance/

References

Generated documentation is available in REFERENCE.md. If you need to generate this again for any reason, run the following command:

bundle exec puppet strings generate --format markdown --out REFERENCE.md