Forge Home

clustercontrol

Installs ClusterControl (supports online and offline setup) for your new database node/cluster deployment or on top of your existing database node/cluster.

14,620 downloads

203 latest version

2.3 quality score

We run a couple of automated
scans to help you access a
module's quality. Each module is
given a score based on how well
the author has formatted their
code and documentation and
modules are also checked for
malware using VirusTotal.

Please note, the information below
is for guidance only and neither of
these methods should be considered
an endorsement by Puppet.

Version information

  • 1.0.1 (latest)
  • 1.0.0
  • 0.1.11
  • 0.1.10
  • 0.1.9
  • 0.1.8
  • 0.1.7
  • 0.1.6
  • 0.1.4
  • 0.1.3
  • 0.1.2
  • 0.1.1
released Jun 15th 2023
This version is compatible with:
  • Puppet Enterprise 2019.8.x, 2019.7.x, 2019.5.x, 2019.4.x, 2019.3.x, 2019.2.x, 2019.1.x, 2019.0.x, 2018.1.x
  • Puppet >= 5.5 < 7.0.0
  • , , ,

Start using this module

  • r10k or Code Manager
  • Bolt
  • Manual installation
  • Direct download

Add this module to your Puppetfile:

mod 'severalnines-clustercontrol', '1.0.1'
Learn more about managing modules with a Puppetfile

Add this module to your Bolt project:

bolt module add severalnines-clustercontrol
Learn more about using this module with an existing project

Manually install this module globally with Puppet module tool:

puppet module install severalnines-clustercontrol --version 1.0.1

Direct download is not typically how you would use a Puppet module to manage your infrastructure, but you may want to download the module in order to inspect the code.

Download

Documentation

severalnines/clustercontrol — version 1.0.1 Jun 15th 2023

clustercontrol

Table of Contents

  1. Overview
  2. Module Description
  3. Setup
  4. Usage
  5. Limitations
  6. Development

Overview

Installs ClusterControl for your new database node/cluster deployment or on top of your existing database node/cluster. ClusterControl is a management and automation software for database clusters. It helps deploy, monitor, manage and scale your database cluster. This module will install ClusterControl and configure it to manage and monitor an existing database cluster.

Supported database clusters:

  • MySQL Replication (Percona/MariaDB/Oracle MySQL)
  • MySQL Galera (Percona XtraDB/MariaDB)
  • MySQL Cluster (NDB)
  • TimesaleDB
  • PostgreSQL (supports Single or Streaming Replication)
  • MongoDB ReplicaSet (Percona/Mongodb)
  • MongoDB Shards (Percona/Mongodb) More details at Severalnines website.

Module Description

The Puppet module for ClusterControl automates the following actions based on the scope of this module:

  • Setup ClusterControl required repositories
  • Download and installs dependencies. These dependencies are required by its compontents such as Apache, PHP, OpenSSL, MySQL/MariaDB are among its basic packages required.
  • Install ClusterControl components such as the controller, front-end, CMON cloud, CMON SSH, and CMON Clud (upload/download cloud link)
  • Automates configuration for Apache
    • configures the for port 80 and port 443 (for SSL/TLS). This includes its designated rewrite rules needed
    • ensures port 443 is enabled
    • enables header module setting X-Frame-Options: sameorigin
    • check permission for ClusterControl UI and install SSL.
  • Automates MySQL/MariaDB installation.
    • create CMON DB, grant cmon user and configure DB for ClusterControl UI.

[//]: <> (Copy the generated SSH key to all nodes.)

If you have any questions, feel free to raise issues via https://github.com/severalnines/puppet/issues or hit your question via our Community Forums or via Slack

Setup

What ClusterControl affects

  • Severalnines yum/apt repository
  • ClusterControl controller, frontend, cmon-cloud and cmon-clud, and cmon-ssh packages
  • Disables SELinux/AppArmor. You can enable once setup correctly.
  • MySQL server and client
  • Apache web server with PHP 5
  • SSH key (authorized_keys)

Requirements

Make sure you meet following criteria prior to the deployment:

  • ClusterControl node must run on a clean dedicated host with internet connection.
  • If you are running as non-root user, make sure the user is able to escalate to root with sudo command.
  • For SUSE(SLES) or OpenSUSE Linux, make sure you install tye zypprepo module (Checkout Zypprepo here). You can do that by installing it to your puppet master as follows,
$ /opt/puppetlabs/bin/puppet module install puppet-zypprepo

Installation

Our ClusterControl module for puppet is available either on Puppet Forge or using this Severalnines Puppet by cloning or downloading it as a zip. Then place it under puppetlabs modulepath directory and make sure to name your module directory as clustercontrol, i.e. /etc/puppetlabs/code/environments/production/modules/clustercontrol for example.

First you need to generate an API Token. To do this, go to $modulepath/clustercontrol/files, then run the following. For example,

root@master:/etc/puppetlabs/code/environments/production/modules/clustercontrol# files/s9s_helper.sh --generate-token
efc6ac7fbea2da1b056b901541697ec7a9be6a77

Reserve that toke which you will use that as an input parameter for your manifests file.

Given the example scenario, let say you have the following hosts:

clustercontrol.local    192.168.1.10
galera1.local           192.168.1.11
galera2.local           192.168.1.12
galera3.local           192.168.1.13

Then, create a manifests file, let say we named it clustercontrol.pp

root@master:/etc/puppetlabs/code/environments/production# ls -alth manifests/clustercontrol.pp
-rw-r--r-- 1 root root 1.4K Oct 23 15:00 manifests/clustercontrol.pp

Then have the following example puppet agent node below where the hostname of the target to install CC using puppet is 192.168.40.90. Below is the definition for ClusterControl as follows:

node 'clustercontrol.puppet.local' { # Applies only to mentioned node. If nothing mentioned, applies to all.
        class { 'clustercontrol':
            is_controller => true,
            cc_hostname => '192.168.40.90',
            mysql_cmon_password => 'R00tP@55',
            api_token => 'efc6ac7fbea2da1b056b901541697ec7a9be6a77',
            ssh_user => 'vagrant',
            ssh_user_group => 'vagrant'
        }
}

Then run the command,

puppet agent -t

on the target clustercontrol, which is the host clustercontrol.puppet.local for this example installation.

Once deployment is complete, open the ClusterControl web UI at https://[ClusterControl IP address]/clustercontrol and create a default admin login. You can now start to add existing database node/cluster, or deploy a new one. Ensure that passwordless SSH is configured properly from ClusterControl node to all DB nodes beforehand.

To setup passwordless SSH on target database nodes, use following commands on ClusterControl node (as ssh_user), e.g:

ssh-copy-id 192.168.1.11  # galera1
ssh-copy-id 192.168.1.12  # galera2
ssh-copy-id 192.168.1.13  # galera3

Usage

General Options

is_controller

Define whether the node is ClusterControl controller host. All database nodes that you want ClusterControl to manage should be set to false.
Default: (Boolean) true

clustercontrol_host

Specify the IP address of the ClusterControl node. You can specify ClusterControl's FQDN only if the monitored MySQL servers are configured to perform host name resolution (skip-name-resolve is disabled) or MongoDB servers. Only specify this option on nodes that you want to be managed by ClusterControl.
Example: (String) '192.168.0.10'

email_address

Specify an email as root user for ClusterControl UI. You will login using this email with default password 'admin'.
Default: (String) 'admin@domain.com'

ssh_user

Specify the SSH user that ClusterControl will use to manage the database nodes. Unless root, make sure this user is in sudoers list.
Default: (String) 'root'

ssh_user_group

Specify the SSH user system group that ClusterControl will use to manage the database nodes. Unless root, make sure this user is in sudoers list.
Default: (String) 'root'

ssh_key

#####is_controller Define whether the node is ClusterControl controller host. All database nodes that you want ClusterControl to manage should be set to false.
Default: (Boolean) true

clustercontrol_host

Specify the IP address of the ClusterControl node. You can specify ClusterControl's FQDN only if the monitored MySQL servers are configured to perform host name resolution (skip-name-resolve is disabled) or MongoDB servers. Only specify this option on nodes that you want to be managed by ClusterControl.
Example: (String) '192.168.0.10'

email_address

Specify an email as root user for ClusterControl UI. You will login using this email with default password 'admin'.
Default: (String) 'admin@domain.com'

ssh_user

Specify the SSH user that ClusterControl will use to manage the database nodes. Unless root, make sure this user is in sudoers list.
Default: (String) 'root'

ssh_key

Specify the SSH key used by ssh_user to perform passwordless SSH to the database nodes.
Default: (String) '/home/$USER/.ssh/id_rsa' (non-root,sudoer)
Default: (String) '/root/.ssh/id_rsa' (root)

ssh_port

Specify the SSH port used by ClusterControl to SSH into database hosts. All nodes in the cluster must use the same SSH port.
Default: (Integer) 22

sudo_password

If sudo user has password, specify it here. ClusterControl requires this to automate database recovery or perform other management procedures. If ssh_user is root, this will be ignored.
Example: (String) 'mysud0p4ssword'

api_token

Specify the 40-character ClusterControl token generated from s9s_helper script.
Example: (String) 'b7e515255db703c659677a66c4a17952515dbaf5'

mysql_cmon_root_password

Specify the MySQL root password for ClusterControl host. This module will install a MySQL server and use this as root password.
Default: (String) 'password'

mysql_cmon_password

Specify the MySQL password for user cmon. The module will grant this user with specified password, and is needed by ClusterControl.
Default: (String) 'cmon'

mysql_cmon_port

MySQL server port that holds CMON database.
Default: (Integer) 3306

datadir

MySQL datadir on ClusterControl node.
Default: (String) '/var/lib/mysql'

modulepath

The modulepath of your Puppet Server setup, equivalent to what's defined in your environment.conf with the clustercontrol module name.
Default: (String) '/etc/puppetlabs/code/environments/production/modules/clustercontrol/'

ssh_port

Specify the SSH port used by ClusterControl to SSH into database hosts. All nodes in the cluster must use the same SSH port.
Default (Integer) 22

sudo_password

If sudo user has password, specify it here. ClusterControl requires this to automate database recovery or perform other management procedures. If ssh_user is root, this will be ignored.
Example: (String) 'mysud0p4ssword'

api_token

Specify the 40-character ClusterControl token generated from s9s_helper script.
Example: (String) 'b7e515255db703c659677a66c4a17952515dbaf5'

mysql_cmon_root_password

Specify the MySQL root password for ClusterControl host. This module will install a MySQL server and use this as root password.
Default: (String) 'password'

mysql_cmon_password

Specify the MySQL password for user cmon. The module will grant this user with specified password, and is needed by ClusterControl.
Default: (String) 'cmon'

mysql_cmon_port

MySQL server port that holds CMON database.
Default: (Integer) 3306

datadir

MySQL datadir on ClusterControl node.
Default: (String) '/var/lib/mysql'

disable_firewall

Disables the firewall by default which is set to true. When disable_firewall is true, it means that flushing the iptables, then stops the ufw/firewalld. If disable_firewall is set to false, the module will just do nothing and let your current firewall configuration untouched.
Default: (Boolean) true

disable_os_sec_module

Disables the OS security module i.e. Apparmor or SELinux, which is by default. It's not the ideal setup for security. Since ClusterControl is a complex software, it's ideal to disable it as its known to have issues when running the cmon daemon, for example with SELinux enabled. You can later enable your security module anyway once you have setup required levels all sorted out. Once you have that, do not forget to change the security module as well so Puppet will not update your current CC setup. If disable_os_sec_module is set to false, the module will just do nothing and let your current Apparmor/SELinux configuration untouched.
Default: (Boolean) true

controller_id

The controller_id is an arbitrary string which ClusterControl requires to work properly. By default, it uses a UUID random string which references the uuidgen Linux command which is part of the libuuid or util-linux package, so this shall be present in all recent Linux systems we support. Checkout the documentation for the components under the CMON section for more details.
Default: (UUID) string

is_online_install

The is_online_install option is used to flag whether the type of setup for installation is online (default) or offline. By default, the option is_online_install is set to true and it will always rely on the repository to access the internet to download and install OS packages. For more private and encapsulated type of environment, then offline installation is for you. You just have to set the is_online_install to false or is_online_install=false.
Default: (Boolean) true

cc_packages_path

The cc_packages_path option is a Hash data type which uses key-value. This option defines the following key-value as shown below:

## For Debian/Ubuntu
  $cc_packages_path             = {
    'clustercontrol-controller' => '',
    'clustercontrol' => '',
    'clustercontrol-cloud' => '',
    'clustercontrol-clud' => '',
    'clustercontrol-ssh' => '',
    'clustercontrol-notifications' => '',
    'libs9s' => '',
    's9s-tools' => ''
  },
## For RHEL/CentOS
  $cc_packages_path             = {
    'clustercontrol-controller' => '',
    'clustercontrol' => '',
    'clustercontrol-cloud' => '',
    'clustercontrol-clud' => '',
    'clustercontrol-ssh' => '',
    'clustercontrol-notifications' => '',
    's9s-tools' => ''
  },

The keys has to be exactly as shown above, and its values is the exact full path where the packages are located and it has to be coming from the target host/node where CC is to be installed. To grab the ClusterControl packages, click this page https://severalnines.com/downloads/cmon/?C=M;O=D. For the s9s CLI tools, click check out http://repo.severalnines.com/s9s-tools/. For example, my target hostname called pupnode2.puppet.local where ClusterControl will be installed is a Debian 10 (Buster). Then in my manifests file /etc/puppetlabs/code/environments/production/manifests/clustercontrol.pp, here's the following:

node 'pupnode2.puppet.local' { # Applies only to mentioned node. If nothing mentioned, applies to all.

        class { 'clustercontrol':
                        is_controller => true,
                        cc_hostname => '192.168.40.20',
                        mysql_root_password => 'R00tP@55',
                        mysql_cmon_root_password => 'R00tP@55',
                        mysql_cmon_password => 'R00tP@55',
                        api_token => '6df80ef0cf75be2537f9bd07f00fd35813e5a59b',
                        ssh_user => 'vagrant',
                        is_online_install => false,
                        cc_packages_path => {
                                'clustercontrol-controller' => '/opt/clustercontrol/binaries/clustercontrol-controller-1.8.2-4478-x86_64.deb',
                                'clustercontrol' => '/opt/clustercontrol/binaries/clustercontrol_1.8.2-7804_x86_64.deb',
                                'clustercontrol-cloud' => '/opt/clustercontrol/binaries/clustercontrol-cloud_1.8.2-280_x86_64.deb',
                                'clustercontrol-clud' => '/opt/clustercontrol/binaries/clustercontrol-clud_1.8.2-280_x86_64.deb',
                                'clustercontrol-ssh' => '/opt/clustercontrol/binaries/clustercontrol-ssh_1.8.2-105_x86_64.deb',
                                'clustercontrol-notifications' => '/opt/clustercontrol/binaries/clustercontrol-notifications_1.8.2-267_x86_64.deb',
                                'libs9s' => '/opt/clustercontrol/binaries/s9s_debian_buster/libs9s0_1.8.20210126-release1_amd64.deb',
                                's9s-tools' => '/opt/clustercontrol/binaries/s9s_debian_buster/s9s-tools_1.8.20210126-release1_amd64.deb'
                        }/*
                        cc_packages_path => {
                                'clustercontrol-controller' => '/opt/clustercontrol/binaries/clustercontrol-controller-1.8.2-4478-x86_64.rpm',
                                'clustercontrol' => '/opt/clustercontrol/binaries/clustercontrol-1.8.2-7836-x86_64.rpm',
                                'clustercontrol-cloud' => '/opt/clustercontrol/binaries/clustercontrol-cloud-1.8.2-286-x86_64.rpm',
                                'clustercontrol-clud' => '/opt/clustercontrol/binaries/clustercontrol-clud-1.8.2-286-x86_64.rpm',
                                'clustercontrol-ssh' => '/opt/clustercontrol/binaries/clustercontrol-ssh-1.8.2-105-x86_64.rpm',
                                'clustercontrol-notifications' => '/opt/clustercontrol/binaries/clustercontrol-notifications-1.8.2-267-x86_64.rpm',
                                's9s-tools' => '/opt/clustercontrol/binaries/s9s_el8/s9s-tools-1.8-11.1.x86_64.rpm'
                        }*/
        }
}

Default: (Hash) key-value

Limitations

ClusterControl Module for Puppet supports only Debian/Ubuntu and RHEL/CentOS combination of Linux OS versions. From these supported distros, all versions that had passed its EOL or almost reaching its EOL are no longer supported. Below are the supported versions:

  • Debian 9.x (stretch)
  • Debian 10.x (buster)
  • Debian 11.x (bullseye)
  • Ubuntu 16.x LTS (Xenial Xerus)
  • Ubuntu 18.x LTS(Bionic Beaver)
  • Ubuntu 20.04.x LTS (Focal Fossa)
  • Ubuntu 22.04 LTS (Jammy Jellyfish)
  • AlmaLinux/Oracle Linux/Rocky/RHEL/CentOS 7.x/8.x/9.x

Currently, ClusterControl does not support PHP. 8.x. For RHEL/Oracle Linux/CentOS 9.x versions, you need to downgrade from PHP 8.x to PHP 7.x since the ClusterControl UI version 1 cannot work with PHP 8.x, unless you are going to use ClusterControl version 2.

This module only supports bootstrapping MySQL servers with IP address only (it expects skip-name-resolve is enabled on all MySQL nodes).

ClusterControl known issues and limitations.

Development

Please report bugs or suggestions via our support channel: https://support.severalnines.com