r10k Configuration Module

Table of Contents

1. Overview
2. Module Description - What the module does and why it is useful
3. Setup - The basics of getting started with r10k
   • Prefix Example
   • What r10k affects
   • Setup Requirements
   • Beginning with r10k
   • Using an internal gem server
   • Mcollective Support
4. Webhook Support
5. Reference - An under-the-hood peek at what the module is doing and how
6. Limitations - OS compatibility, etc.
7. Support
8. Development - Guide for contributing to the module
9. Running tests

Overview

This module was built to install and configure r10k. It has a base class to configure r10k to synchronize dynamic environments. It also has a series of lateral scripts and tools that assist in general workflow, that will be separated into their own modules into the future.

Module Description

This module is meant to manage the installation and configuration of r10k using multiple installation methods on multiple platforms.

Setup

Please refer to the official r10k docs for specific configuration patterns.

Prefix Example

Instead of passing a single remote, you can pass a puppet hash as the sources parameter. This allows you to configure r10k with prefix support. This often used when multiple teams use separate repos, or if hiera and puppet are distributed across two repos.

class { 'r10k':
  sources => {
    'webteam' => {
      'remote'  => 'ssh://git@github.com/webteam/somerepo.git',
      'basedir' => "${::settings::codedir}/environments",
      'prefix'  => true,
    },
    'secteam' => {
      'remote'  => 'ssh://git@github.com/secteam/someotherrepo.git',
      'basedir' => '/some/other/basedir',
      'prefix'  => true,
    },
  },
}

What r10k affects

• Installation of the r10k gem
• Installation of ruby when not using an existing ruby stack i.e. when using puppet_gem
• Management of the r10k.yaml in /etc
• Installation and configuration of a sinatra app when using the webhook.

Version chart

Gem installation is pinned to a default version in this module, the following chart shows the gem installation tested with the respective module version. You can override this by passing the version parameter.

Module Version	r10k Version
v4.0.0+
v3.0.x	1.5.1
v2.8.2	1.5.1
v2.7.x	1.5.1
v2.6.5	1.4.1
v2.5.4	1.4.0
v2.4.4	1.3.5
v2.3.1	1.3.4
v2.3.0	1.3.2
v2.2.8	1.3.1
v2.2.x	1.1.0

Setup Requirements

r10k connects via ssh and does so silently in the background, this typically requires ssh keys to be deployed in advance of configuring r10k. This includes the known host ( public ) key of the respective git server, and the user running r10k's private key used to authenticate git/ssh during background runs. If you are going to use git repos to retrieve modules, you also need git installed.

Here is an example of deploying the git package and ssh keys needed for r10k to connect to a repo called puppet/control on a gitlab server. This is helpful when you need to automatically deploy new masters

package { 'git':
  ensure => installed,
}

#https://docs.puppetlabs.com/references/latest/type.html#sshkey
sshkey { 'your.internal.gitlab.server.com':
  ensure => present,
  type   => 'ssh-rsa',
  target => '/root/.ssh/known_hosts',
  key    => '...+dffsfHQ==',
}

# Resource git_webhook is provided by https://github.com/bjvrielink/abrader-gms/tree/fixup
git_deploy_key { 'add_deploy_key_to_puppet_control':
  ensure       => present,
  name         => $facts['networking']['fqdn'],
  path         => '/root/.ssh/id_dsa.pub',
  token        => hiera('gitlab_api_token'),
  project_name => 'puppet/control',
  server_url   => 'http://your.internal.gitlab.server.com',
  provider     => 'gitlab',
}

A simple example of creating an ssh private key would use an exec to call yes y | ssh-keygen -t dsa -C "r10k" -f /root/.ssh/id_dsa -q -N ''. The example above shows using git_deploy_key which would deploy that key to the remote git server via its api. This is often required in the programtic creation of compile masters.

Given r10k will likely be downloading your modules, often on the first server it's run on, you will have to puppet apply this module to bootstrap this configuration and allow for ongoing management from there.

Beginning with r10k

The simplest example of using it would be to declare a single remote that would be written to r10k.yaml.

class { 'r10k':
  remote => 'git@github.com:someuser/puppet.git',
}

This will configure /etc/r10k.yaml and install the r10k gem after installing ruby using the puppetlabs/ruby module.

It also supports installation via multiple providers, such as installation in the puppet_enterprise ruby stack in versions less than 3.8

Installing into the Puppet Enterprise ruby stack in PE 2015.x

class { 'r10k':
  remote   => 'git@github.com:someuser/puppet.git',
  provider => 'puppet_gem',
}

Note: It is recommended you migrate to using the pe_r10k module which is basically a clone of this modules features and file tickets for anything missing.

Using an internal gem server

Depending on implementation requirements, there are two ways to use alternate gem sources.

The gemrc approach

Create a global gemrc for Puppet Enterprise to add the local gem source. See http://projects.puppetlabs.com/issues/18053#note-12 for more information.

file { '/opt/puppet/etc':
  ensure => 'directory',
  owner  => 'root',
  group  => '0',
  mode   => '0755',
}

file { 'gemrc':
  ensure  => 'file',
  path    => '/opt/puppet/etc/gemrc',
  owner   => 'root',
  group   => '0',
  mode    => '0644',
  content => "---\nupdate_sources: true\n:sources:\n- http://your.internal.gem.server.com/rubygems/\n",
}

class { 'r10k':
  remote   => 'git@github.com:someuser/puppet.git',
  provider => 'pe_gem',
  require  => File['gemrc'],
}

The parameter approach

Add gem_source to declaration.

class { 'r10k':
  remote      => 'git@github.com:someuser/puppet.git',
  provider    => 'gem',
  gem_source  => 'https://some.alternate.source.com/',
}

Mcollective Support

An mcollective agent is included in this module which can be used to do on demand synchronization. This mcollective application and agent can be installed on all masters using the following class Note: You must have mcollective already configured for this tool to work, Puppet Enterprise users will automatically have mcollective configured. This class does not restart the mcollective or pe-mcollective server on the nodes to which it is applied, so you may need to restart mcollective for it to see the newly installed r10k agent.

include r10k::mcollective

Using mco you can then trigger mcollective to call r10k using

mco r10k synchronize

You can sync an individual environment using:

mco r10k deploy <environment>

Note: This implies -p

You can sync an individual module using:

mco r10k deploy_module <module>

If you are required to run r10k as a specific user, you can do so by passing the user parameter:

mco r10k synchronize user=r10k

To obtain the output of running the shell command, run the agent like this:

mco rpc r10k synchronize -v

An example post-receive hook is included in the files directory. This hook can automatically cause code to synchronize on your servers at time of push in git. More modern git systems use webhooks, for those see below.

Passing proxy info through mco

The mcollective agent can be configured to supply r10k/git environment http_proxy, https_proxy variables via the following example

class { 'r10k::mcollective':
  http_proxy     => 'http://proxy.example.lan:3128',
  git_ssl_no_verify => 1,
}

Install mcollective support for post receive hooks

Install the mco command from the puppet enterprise installation directory i.e.

cd ~/puppet-enterprise-3.0.1-el-6-x86_64/packages/el-6-x86_64
sudo rpm -i pe-mcollective-client-2.2.4-2.pe.el6.noarch.rpm

Copy the peadmin mcollective configuration and private keys from the certificate authority (puppet master)

/var/lib/peadmin/.mcollective
/var/lib/peadmin/.mcollective.d/mcollective-public.pem
/var/lib/peadmin/.mcollective.d/peadmin-cacert.pem
/var/lib/peadmin/.mcollective.d/peadmin-cert.pem
/var/lib/peadmin/.mcollective.d/peadmin-private.pem
/var/lib/peadmin/.mcollective.d/peadmin-public.pem

Ensure you update the paths in ~/.mcollective when copying to new users whose name is not peadmin. Ideally mcollective will be used with more then just the peadmin user's certificate in the future. That said, if your git user does not have a home directory, you can rename .mcollective as /etc/client.cfg and copy the certs to somewhere that is readable by the respective user.

/home/gitolite/.mcollective
/home/gitolite/.mcollective.d/mcollective-public.pem
/home/gitolite/.mcollective.d/peadmin-cacert.pem
/home/gitolite/.mcollective.d/peadmin-cert.pem
/home/gitolite/.mcollective.d/peadmin-private.pem
/home/gitolite/.mcollective.d/peadmin-public.pem

Note: PE2 only requires the .mcollective file as the default auth was psk

Removing the mcollective agent

class { 'r10k::mcollective':
  ensure => false,
}

This will remove the mcollective agent/application and ddl files from disk. This likely would be if you are migrating to Code manager in Puppet Enterprise.

Webhook Support

For version control systems that use web driven post-receive processes you can use the example webhook included in this module. When the webhook receives the post-receive event, it will synchronize environments on your puppet masters. These settings are all configurable for your specific use case, as shown below in these configuration examples.

NOTE: MCollective and Bolt aren't currently supported with Webhook Go. This will be addressed in a future release of Webhook Go, but is an issue related to the complex nature of Bolt and MCollective/Choria commands that cause issues with the way Go executes shell commands.

Webhook Github Enterprise - Non Authenticated

This is an example of using the webhook without authentication. The git_webhook type will use the api token to add the webhook to the "control" repo that contains your puppetfile. This is typically useful when you want to automate the addition of the webhook to the repo.

# Instead of running via mco, run r10k directly
class {'r10k::webhook::config':
  use_mcollective => false,
}

class {'r10k::webhook':
  ensure         => true,
  server         => {
    protected => false,
  },
}

# Add webhook to control repository ( the repo where the Puppetfile lives )
#
# Resource git_webhook is provided by https://github.com/bjvrielink/abrader-gms/tree/fixup
git_webhook { 'web_post_receive_webhook' :
  ensure       => present,
  webhook_url  => 'http://master.of.masters:8088/payload',
  token        =>  hiera('github_api_token'),
  project_name => 'organization/control',
  server_url   => 'https://your.github.enterprise.com',
  provider     => 'github',
}


# Add webhook to module repo if we are tracking branch in Puppetfile i.e.
# mod 'module_name',
#  :git    => 'http://github.com/organization/puppet-module_name',
#  :branch => 'master'
# The module name is determined from the repo name , i.e. <puppet-><module_name>
# All characters with left and including any hyphen are removed i.e. <puppet->
#
# Resource git_webhook is provided by https://github.com/bjvrielink/abrader-gms/tree/fixup
git_webhook { 'web_post_receive_webhook_for_module' :
  ensure       => present,
  webhook_url  => 'http://master.of.masters:8088/module',
  token        =>  hiera('github_api_token'),
  project_name => 'organization/puppet-module_name',
  server_url   => 'https://your.github.enterprise.com',
  provider     => 'github',
}

Webhook Github Example - Authenticated

This is an example of using the webhook with authentication. The git_webhook type will use the api token to add the webhook to the "control" repo that contains your puppetfile. This is typically useful when you want to automate the addition of the webhook to the repo.

# Instead of running via mco, run r10k directly
class {'r10k::webhook::config':
  use_mcollective => false,
}

# External webhooks often need authentication and ssl and authentication
# Change the url below if this is changed

class {'r10k::webhook':
  ensure => true,
  server => {
      protected => true,
  },
  tls    => {
      enabled     => true,
      certificate => '/path/to/ssl/certificate',
      key         => '/path/to/ssl/key',
  },
}

# Add webhook to control repository ( the repo where the Puppetfile lives )
#
# Resource git_webhook is provided by https://github.com/bjvrielink/abrader-gms/tree/fixup
git_webhook { 'web_post_receive_webhook' :
  ensure             => present,
  webhook_url        => 'https://puppet:puppet@hole.in.firewall:8088/payload',
  token              =>  hiera('github_api_token'),
  project_name       => 'organization/control',
  server_url         => 'https://api.github.com',
  disable_ssl_verify => true,
  provider           => 'github',
}

# Add webhook to module repo if we are tracking branch in Puppetfile i.e.
# mod 'module_name',
#  :git    => 'http://github.com/organization/puppet-module_name',
#  :branch => 'master'
# The module name is determined from the repo name , i.e. <puppet-><module_name>
# All characters with left and including any hyphen are removed i.e. <puppet->
#
# Resource git_webhook is provided by https://github.com/bjvrielink/abrader-gms/tree/fixup
git_webhook { 'web_post_receive_webhook_for_module' :
  ensure       => present,
  webhook_url  => 'https://puppet:puppet@hole.in.firewall:8088/module',
  token        =>  hiera('github_api_token'),
  project_name => 'organization/puppet-module_name',
  server_url   => 'https://api.github.com',
  disable_ssl_verify => true,
  provider     => 'github',
}

Webhook Bitbucket Example

This is an example of using the webhook with Atlassian Bitbucket (former Stash). Requires the external hooks addon by https://marketplace.atlassian.com/plugins/com.ngs.stash.externalhooks.external-hooks/server/overview and a specific Bitbucket user/pass. Remember to place the stash_mco.rb on the bitbucket server an make it executable. Enable the webhook over the repository settings External Async Post Receive Hook:

• Executable: e.g. /opt/atlassian/bitbucket-data/external-hooks/stash_mco.rb (see hook_exe)
• Positional parameters: -t http://git.example.com:8088/payload

# Add deploy key
git_deploy_key { 'add_deploy_key_to_puppet_control':
  ensure       => present,
  name         => $facts['networking']['fqdn'],
  path         => '/root/.ssh/id_rsa.pub',
  username     => 'api',
  password     => 'pass',
  project_name => 'project',
  repo_name    => 'puppet',
  server_url   => 'https://git.example.com',
  provider     => 'stash',
}

# Add webhook
git_webhook { 'web_post_receive_webhook' :
  ensure       => present,
  webhook_url  => 'https://puppet:puppet@hole.in.firewall:8088/module',
  password     => 'pass',
  username     => 'api',
  project_name => 'project',
  repo_name    => 'puppet',
  server_url   => 'https://git.example.com',
  provider     => 'stash',
  hook_exe     => '/opt/atlassian/bitbucket-data/external-hooks/stash_mco.rb',
}

Webhook - remove webhook init script and config file.

For use when moving to Code Manager, or other solutions, and the webhook should be removed.

class {'r10k::webhook':
  ensure => false,
}

Webhook Prefix Example

Prefixing the command is currently not supported in Webhook Go. This support is expected to be added with a later release.

Webhook FOSS support with MCollective

MCollective is currently unsupported by Webhook Go. This is expected to be added in a future release and documentation will be updated for that then.

Webhook Slack notifications

You can enable Slack notifications for the webhook. You will need a Slack webhook URL and the slack-notifier gem installed.

To get the Slack webhook URL you need to:

1. Go to https://slack.com/apps/A0F7XDUAZ-incoming-webhooks.
2. Choose your team, press Configure.
3. In configurations press Add configuration.
4. Choose channel, press Add Incoming WebHooks integration.

Then configure the webhook to add your Slack Webhook URL.

class { 'r10k::webhook':
  . . .
  chatops => {
      enabled    => true,
      service    => 'slack',
      server_uri => 'http://slack.webhook/webhook', # mandatory for usage
      channel    => '#channel', # defaults to #default
      user       => 'r10k', # the username to use
      auth_token => "SLACKAUTHTOKEN",
    }
  }

Webhook Rocket.Chat notifications

You can enable Rocket.Chat notifications for the webhook. You will need a Rocket.Chat incoming webhook URL and the rocket-chat-notifier gem installed.

To get the Rocket.Chat incoming webhook URL you need to:

1. Go to your Rocket.Chat and then select Administration-Integrations.
2. Choose New integration.
3. Choose Incoming WebHook. In the webhook form configure:

• Enabled: True.
• Name: A name for your webhook.
• Post to Channel: The channel to post to by default.

4. Save changes with Save Changes bottom.

Then configure the webhook to add your Rocket.Chat Webhook URL.

class { 'r10k::webhook':
  . . .
  chatops => {
    enabled    => true,
    service    => 'rocketchat',
    server_uri => '<your incoming webhook URL>',
    user       => 'username',
    channel    => '#channel',
    auth_token => 'ROCKETCHATAUTHTOKEN',
  }
}

Webhook Default Branch

The default branch of the controlrepo is commonly called production. This value can be overridden if you use another default branch name, such as master.

class { 'r10k::webhook':
  ensure => true,
  r10k   => {
    default_branch => 'master', # Optional. Defaults to 'production'
  },
}

Triggering the webhook from curl

To aid in debugging, or to give you some hints as to how to trigger the webhook by unsupported systems, here's a curl command to trigger the webhook to deploy the 'production' environment:

curl --header "X-Gitlab-Event: Push Hook" -d '
  {
    "repository": {"name": "foo", "owner": {"login": "foo"}},
    "ref": "production"
  }' http://puppet-master.example:4000/api/v1/r10k/environment

If you are utilizing environment prefixes, you'll need to specify the full environment title (including the prefix) in the 'ref' parameter:

curl --header "X-Gitlab-Event: Push Hook" -d '
  {
    "repository": {"name": "bar", "owner": {"login": "foo"}},
    "ref": "bar_production"
  }' http://puppet-master.example:4000/api/v1/r10k/environment

Troubleshooting

If you're not sure whether your webhook setup works:

• Try to make a GET request to the heartbeat endpoint (e.g. http://puppet-master.example:8088/heartbeat).  You should see a short JSON answer similar to {"status":"success","message":"running"}.
• Watch the webhook logfile at /var/log/webhook/access.log, and send requests (e.g. using curl). Example output if successful:

$ journalctl -f -u webhook-go.service
...
Jun 05 11:24:54 pop-os systemd[1]: Started Puppet Deployment API Server....

Docker

If you are building your image with the puppet, you need to prevent the webhook process from starting as a daemon.

The following is an example of declaring the webhook without a background mode

class { 'r10k::webhook':
  ensure => false,
}

Ignore deploying some environments

Webhook Go does not support this yet, but will in the future.

Reference

Class: r10k

This is the main public class to be declared , handingly installation and configuration declarations

Parameters within r10k:

remote

A string to be passed in as the source with a hardcode prefix of puppet

sources

A hash of all sources, this gets read out into the file as yaml. Must not be declared with remote

cachedir

A single string setting the r10k.yaml configuration value of the same name

configfile

A path to the configuration file to manage. Be aware Puppet Enterprise 4.0 and higher may conflict if you manage /etc/puppetlabs/puppet/r10k.yaml

version

A value passed to the package resource for managing the gem version

modulepath

Deprecated: for older configfile environments configuration of modulepath in puppet.conf

manage_modulepath

Deprecated: declare a resource for managing modulepath in Puppet.conf

proxy

A string setting ther10k.yaml configuration value of the same name

gem_source

An optional string specifying location to retrieve gem

pool_size

Integer defining how many threads should be spawn while updating modules. Only available for r10k >= 3.3.0.

r10k_basedir

package_name

The name of the package to be installed via the provider

provider

The supported installation modes for this module

• bundle
• puppet_gem
• gem

install_options

Options to pass to the provider declaration

mcollective

Install mcollective application and agents. This does NOT configure mcollective automatically

manage_configfile_symlink

Manage a symlink to the configuration file, for systems installed in weird file system configurations

git_settings

This is the git: key in r10k, it accepts a hash that can be used to configure rugged support.

    $git_settings = {
      'provider'    => 'rugged',
      'private_key' => '/root/.ssh/id_rsa',
    }

    class {'r10k':
      remote       => 'git@github.com:acidprime/puppet.git',
      git_settings => $git_settings,
    }

forge_settings

This is the forge: key in r10k, it accepts a hash that contains settings for downloading modules from the Puppet Forge.

    $forge_settings = {
      'proxy'   => 'https://proxy.example.com:3128',
      'baseurl' => 'https://forgeapi.puppetlabs.com',
    }

    class {'r10k':
      remote         => 'git@github.com:acidprime/puppet.git',
      forge_settings => $forge_settings,
    }

deploy_settings

This is the deploy: key in r10k, it accepts a hash that contains setting that control how r10k code deployments behave. Documentation for the settings can be found here.

    $deploy_settings = {
      'purge_levels' => ['puppetfile'],
    }

    class {'r10k':
      remote          => 'git@github.com:voxpupuli/puppet.git',
      deploy_settings => $deploy_settings,
    }

configfile_symlink

boolean if to manage symlink

include_prerun_command

Deprecated: Add prerun_command to puppet.conf to run r10k when the agent on the master runs. Suggest instead declaring r10k::postrun_command as that will run after the agent runs which prevents r10k from stopping configuration management of masters from occurring as it does with prerun_commands

include_postrun_command

r10k::include_postrun_command: true

The concept here is that this is declared on the puppet master(s) that have been configured with r10k. This will cause r10k to synchronize after each puppet run. Any errors synchronizing will be logged to the standard puppet run.

Limitations

The 4.1.x release deprecates support for:

• Puppet 3
• Ruby 1.9.3

These items are planned for removal in v5.0.0.

Support

Please log tickets and issues at our Projects site

Development

Contributing

Modules on the Puppet Forge are open projects, and community contributions are essential for keeping them great. We can’t access the huge number of platforms and myriad of hardware, software, and deployment configurations that Puppet is intended to serve.

We want to keep it as easy as possible to contribute changes so that our modules work in your environment. There are a few guidelines that we need contributors to follow so that we can have a chance of keeping on top of things.

Please see CONTRIBUTING for more details.

Running tests

This project contains tests for rspec-puppet to verify functionality. For in-depth information please see their respective documentation, as well as CONTRIBUTING.

Quickstart:

    gem install bundler
    bundle install --without system_tests
    bundle exec rake test
    bundle exec rake lint

Check the .travis.yml for supported Operating System Versions

Reference

Table of Contents

Classes

Public Classes

• r10k: This class configures r10k
• r10k::install::bundle: This class installs the r10k bundle
• r10k::install::puppet_gem: This class links the r10k binary for Puppet FOSS 4.2 and up
• r10k::mcollective: Install the r10k mcollective agent
• r10k::mcollective::application: Install the r10k mcollective application to a client
• r10k::params: Reasonable defaults for all classes
• r10k::postrun_command: This class will configure r10k to run as part of the masters agent run
• r10k::prerun_command: This class will configure r10k to run as part of the masters agent run
• r10k::webhook: install and configure the webhook-go package as local webhook receiver to trigger r10k runs
• r10k::webhook::config: Class: r10k::webhook::config
• r10k::webhook::package: Class: r10k::webhook::package
• r10k::webhook::service: Class: r10k::webhook::service

Private Classes

• r10k::config: Set up the root r10k config file (/etc/r10k.yaml).
• r10k::install: This class is used by the ruby or pe_ruby class

Data types

• R10k::Webhook::Config: webhook config type
• R10k::Webhook::Config::Chatops: webhook config chatops type
• R10k::Webhook::Config::R10k: webhook config r10k type
• R10k::Webhook::Config::Server: webhook config server type
• R10k::Webhook::Config::Server::Tls: webhook config server tls type

Tasks

• deploy: Trigger an r10k deployment.

Classes

r10k

This class configures r10k

Parameters

The following parameters are available in the r10k class:

• remote
• configfile
• version
• puppet_master
• modulepath
• manage_modulepath
• r10k_basedir
• package_name
• provider
• gentoo_keywords
• install_options
• mcollective
• git_settings
• deploy_settings
• root_user
• gem_source
• root_group
• include_prerun_command
• include_postrun_command
• puppetconf_path
• cachedir
• sources
• postrun
• manage_configfile_symlink
• configfile_symlink
• forge_settings
• proxy
• pool_size
• ensure

remote

Data type: String[1]

Default value: $r10k::params::remote

configfile

Data type: Stdlib::Absolutepath

Default value: '/etc/puppetlabs/r10k/r10k.yaml'

version

Data type: String[1]

Default value: $r10k::params::version

puppet_master

Data type: Boolean

Default value: $r10k::params::puppet_master

modulepath

Data type: String[1]

Default value: $r10k::params::modulepath

manage_modulepath

Data type: Boolean

Default value: $r10k::params::manage_modulepath

r10k_basedir

Data type: Stdlib::Absolutepath

Default value: $r10k::params::r10k_basedir

package_name

Data type: String[1]

Default value: $r10k::params::package_name

provider

Data type: String[1]

Default value: $r10k::params::provider

gentoo_keywords

Data type: String

Default value: ''

install_options

Data type: Variant[Array,String]

Default value: []

mcollective

Data type: Boolean

Default value: $r10k::params::mcollective

git_settings

Data type: Optional[Hash]

Default value: undef

deploy_settings

Data type: Hash

Default value: { 'generate_types' => true, 'exclude_spec' => true, }

root_user

Data type: String[1]

Default value: $r10k::params::root_user

gem_source

Data type: Optional[String[1]]

Default value: undef

root_group

Data type: String[1]

Default value: $r10k::params::root_group

include_prerun_command

Data type: Boolean

Default value: false

include_postrun_command

Data type: Boolean

Default value: false

puppetconf_path

Data type: Stdlib::Absolutepath

Default value: $r10k::params::puppetconf_path

cachedir

Data type: Stdlib::Absolutepath

Path to a directory to be used by r10k for caching data

Default value: "${facts['puppet_vardir']}/r10k"

sources

Data type: Optional[Hash]

Hash containing data sources to be used by r10k to create dynamic Puppet environments

Default value: undef

postrun

Data type: Optional[Array[String[1]]]

Array containing the parts of a system call Example: ['/usr/bin/curl', '-F', 'deploy=done', 'http://my-app.site/endpoint']

Default value: undef

manage_configfile_symlink

Data type: Boolean

determine if a symlink to the r10k config file is to be managed

Default value: false

configfile_symlink

Data type: Stdlib::Absolutepath

Location of symlink that points to configfile

Default value: '/etc/r10k.yaml'

forge_settings

Data type: Optional[Hash]

Hash containing settings for downloading modules from the Puppet Forge

Default value: undef

proxy

Data type: Optional[String[1]]

String containing proxy setting for r10k.yaml

Default value: undef

pool_size

Data type: Integer[1]

Integer defining how many threads should be spawn while updating modules

Default value: $facts['processors']['count']

ensure

Data type: Enum['absent','present']

if r10k should be installed or purged

Default value: 'present'

r10k::install::bundle

This class installs the r10k bundle

Parameters

The following parameters are available in the r10k::install::bundle class:

• revision
• source

revision

Data type: String[1]

Default value: 'master'

source

Data type: String[1]

Default value: 'https://github.com/adrienthebo/r10k.git'

r10k::install::puppet_gem

This class links the r10k binary for Puppet FOSS 4.2 and up

r10k::mcollective

Install the r10k mcollective agent

Parameters

The following parameters are available in the r10k::mcollective class:

• ensure
• server
• client
• http_proxy
• policies

ensure

Data type: String[1]

Default value: 'present'

server

Data type: Boolean

Default value: true

client

Data type: Boolean

Default value: true

http_proxy

Data type: String

Default value: ''

policies

Data type: Array

Default value: []

r10k::mcollective::application

Install the r10k mcollective application to a client

Parameters

The following parameters are available in the r10k::mcollective::application class:

• agent_name
• app_name
• agent_ddl
• agent_path
• app_path
• mc_service

agent_name

Data type: Optional[String]

Default value: $r10k::params::mc_agent_name

app_name

Data type: Optional[String]

Default value: $r10k::params::mc_app_name

agent_ddl

Data type: Optional[String]

Default value: $r10k::params::mc_agent_ddl_name

agent_path

Data type: Optional[String]

Default value: $r10k::params::mc_agent_path

app_path

Data type: Optional[String]

Default value: $r10k::params::mc_application_path

mc_service

Data type: Optional[String]

Default value: $r10k::params::mc_service_name

r10k::params

Reasonable defaults for all classes

r10k::postrun_command

This class will configure r10k to run as part of the masters agent run

Parameters

The following parameters are available in the r10k::postrun_command class:

• command
• ensure

command

Data type: String[1]

Default value: $r10k::params::pre_postrun_command

ensure

Data type: Enum['present', 'absent']

Default value: 'present'

r10k::prerun_command

This class will configure r10k to run as part of the masters agent run

Parameters

The following parameters are available in the r10k::prerun_command class:

• command
• ensure

command

Data type: String[1]

Default value: $r10k::params::pre_postrun_command

ensure

Data type: Enum['present', 'absent']

Default value: 'present'

r10k::webhook

install and configure the webhook-go package as local webhook receiver to trigger r10k runs

Parameters

The following parameters are available in the r10k::webhook class:

• install_method
• ensure
• version
• service_ensure
• service_enabled
• config_ensure
• config_path
• chatops
• tls
• server
• r10k
• config

install_method

Data type: Enum['package', 'repo', 'none']

how the package should be installed

Default value: 'package'

ensure

Data type: Boolean

Default value: false

version

Data type: String

Default value: '2.8.0'

service_ensure

Data type:

Variant[
    Enum['running', 'stopped'],
    Boolean
  ]

Default value: 'running'

service_enabled

Data type: Boolean

Default value: true

config_ensure

Data type: String

Default value: 'file'

config_path

Data type: String

Default value: '/etc/voxpupuli/webhook.yml'

chatops

Data type: R10k::Webhook::Config::ChatOps

Default value:

{
    enabled    => false,
    service    => undef,
    channel    => undef,
    user       => undef,
    auth_token => undef,
    server_uri => undef,
  }

tls

Data type: R10k::Webhook::Config::Server::Tls

Default value:

{
    enabled     => false,
    certificate => undef,
    key         => undef,
  }

server

Data type: R10k::Webhook::Config::Server

Default value:

{
    protected => true,
    user      => 'puppet',
    password  => 'puppet',
    port      => 4000,
    tls       => $tls,
  }

r10k

Data type: R10k::Webhook::Config::R10k

Default value:

{
    command_path    => '/opt/puppetlabs/puppet/bin/r10k',
    config_path     => '/etc/puppetlabs/r10k/r10k.yaml',
    default_branch  => 'production',
    prefix          => undef,
    allow_uppercase => false,
    verbose         => true,
    deploy_modules  => true,
    generate_types  => true,
  }

config

Data type: R10k::Webhook::Config

Default value:

{
    server  => $server,
    chatops => $chatops,
    r10k    => $r10k,
  }

r10k::webhook::config

Class: r10k::webhook::config

r10k::webhook::package

Class: r10k::webhook::package

r10k::webhook::service

Class: r10k::webhook::service

Data types

R10k::Webhook::Config

webhook config type

Alias of

Struct[{
    server  => Optional[R10k::Webhook::Config::Server],
    chatops => Optional[R10k::Webhook::Config::Chatops],
    r10k    => Optional[R10k::Webhook::Config::R10k],
}]

R10k::Webhook::Config::Chatops

webhook config chatops type

Alias of

Struct[{
    enabled    => Boolean,
    service    => Optional[Enum['slack', 'rocketchat']],
    channel    => Optional[String[1]],
    user       => Optional[String[1]],
    auth_token => Optional[String[1]],
    server_uri => Optional[String[1]],
}]

R10k::Webhook::Config::R10k

webhook config r10k type

Alias of

Struct[{
    command_path    => Optional[Stdlib::Absolutepath],
    config_path     => Optional[Stdlib::Absolutepath],
    default_branch  => Optional[String[1]],
    prefix          => Optional[String[1]],
    allow_uppercase => Optional[Boolean],
    verbose         => Optional[Boolean],
    deploy_modules  => Optional[Boolean],
    generate_types  => Optional[Boolean],
}]

R10k::Webhook::Config::Server

webhook config server type

Alias of

Struct[{
    protected => Boolean,
    user      => Optional[String[1]],
    password  => Optional[String[1]],
    port      => Optional[Stdlib::Port],
    tls       => Optional[R10k::Webhook::Config::Server::Tls],
}]

R10k::Webhook::Config::Server::Tls

webhook config server tls type

Alias of

Struct[{
    enabled     => Boolean,
    certificate => Optional[Stdlib::Absolutepath],
    key         => Optional[Stdlib::Absolutepath],
}]

Tasks

deploy

Trigger an r10k deployment.

Supports noop? false

Parameters

environment

Data type: Optional[Pattern[/\A[a-zA-Z0-9_]+\Z/]]

The environment to deploy.

environments

Data type: Optional[Pattern[/\A[a-zA-Z0-9_,]+\Z/]]

A comma separated list of environments to deploy. Takes precedence over environment.

module

Data type: Optional[Pattern[/\A[a-z0-9_]+\Z/]]

A module to deploy across all environments.

modules

Data type: Optional[Pattern[/\A[a-z0-9_,]+\Z/]]

A comma separated list of modules to deploy. Takes precedence over module.

Changelog

All notable changes to this project will be documented in this file. Each new release typically also includes the latest modulesync defaults. These should not affect the functionality of the module.

v14.0.0 (2024-12-11)

Full Changelog

Breaking changes:

• rm manage_ruby_dependency param & r10k::install::gem #661 (jhoblitt)
• drop support for EL7 #660 (jhoblitt)

Implemented enhancements:

• Add Debian 12 support #669 (bastelfreak)
• Add Ubuntu 24.04 support #668 (bastelfreak)
• Add CentOS 9 support #667 (bastelfreak)
• Add Support for r10k 4 & 5 #666 (bastelfreak)
• Update webhook-go 2.2.0->2.8.0 #665 (saz)

v13.0.0 (2024-04-26)

Full Changelog

Breaking changes:

• Drop Ubuntu 18.04 support #648 (zilchms)

Implemented enhancements:

• Add OracleLinux 8 and 9 support #650 (zilchms)
• Add RHEL 9 support #649 (zilchms)
• Add Ubuntu 20.04 and 22.04 support #647 (zilchms)
• Add documentation stubs #646 (zilchms)

Fixed bugs:

• Use File.exist? instead of File.exists? #645 (tuxmea)
• restore support for EoL Ruby / Puppet 7; enable acceptance tests #642 (zilchms)
• Remove legacy top-scope syntax #639 (smortex)
• Update ordering on webhook and docu #638 (tuxmea)

Merged pull requests:

• puppet/systemd: Allow 7.x #656 (bastelfreak)

v12.2.0 (2023-10-05)

Full Changelog

Implemented enhancements:

• webhook: Update default version 2.1.0->2.2.0 #631 (bastelfreak)
• Implement acceptance tests for webhook-go #627 (bastelfreak)
• webhook: Allow people to host the repo on their own #626 (bastelfreak)

Fixed bugs:

• webhook: Fix default parameter values and add unit tests #630 (bastelfreak)

Merged pull requests:

• replace to_yaml() with stdlib::to_yaml() #632 (bastelfreak)
• puppet/systemd: Allow 6.x #629 (bastelfreak)
• webhook-go: Move static data from params to webhook class #628 (bastelfreak)

v12.1.1 (2023-08-12)

Full Changelog

Merged pull requests:

• puppetlabs/stdlib: require 9.x #620 (bastelfreak)

v12.1.0 (2023-08-09)

Full Changelog

Implemented enhancements:

• Implement global $ensure param to purge r10k #618 (bastelfreak)

v12.0.0 (2023-08-07)

Full Changelog

Breaking changes:

• install.pp: Make class private; Update OpenBSD package name ruby22-r10k->ruby31-r10k #615 (bastelfreak)
• replace r10k template with native puppet code #613 (bastelfreak)
• r10k::config: don't inherit params class #611 (bastelfreak)
• pre_postrun_command: replace deprecated --puppetfile with --modules #610 (bastelfreak)
• deploy settings: generate types by default and dont deploy spec dir #609 (bastelfreak)

Implemented enhancements:

• move static data to init.pp #616 (bastelfreak)
• Add Rocky/AlmaLinux support #614 (bastelfreak)
• Add Puppet 8 support #608 (bastelfreak)

Fixed bugs:

• Bugfix: Fix service name of webhook-go service #605 (tmu-sprd)

Merged pull requests:

• config.pp: move all defaults to params.pp #612 (bastelfreak)

v11.0.1 (2023-06-08)

Full Changelog

Merged pull requests:

• update webhook code with some basic fixes #603 (dhollinger)

v11.0.0 (2023-06-05)

Full Changelog

Breaking changes:

• Delete legacy webhook #595 (bastelfreak)
• Remove old webhook code in preparation for webhook-go being added #594 (dhollinger)
• Drop Puppet 6 support #592 (bastelfreak)
• modulesync 5.5.0; Drop EoL Ubuntu 16.04 #584 (bastelfreak)

Merged pull requests:

• puppetlabs/vcsrepo: Allow 6.x #602 (bastelfreak)
• puppet/systemd: Allow 5.x #601 (bastelfreak)
• puppetlabs/inifile: Allow 6.x #600 (bastelfreak)
• puppetlabs/stdlib: Allow 9.x #599 (bastelfreak)
• Release 11.0.0 #598 (dhollinger)
• README: Don't use top level facts in examples #596 (Geod24)
• Change README.md dependency on (abandoned) abrader/gms to bjvrielink/gms #593 (bschonec)
• update module to work with webhook-go #590 (dhollinger)

v10.3.0 (2023-01-27)

Full Changelog

Implemented enhancements:

• (Feature) Should be installable with the MCollective module #46
• bump puppet/systemd to \< 5.0.0 #587 (jhoblitt)
• Add RHEL8 support. #582 (marcteale)
• pool_size: default to amount of CPU cores #579 (bastelfreak)

Fixed bugs:

• Fix webhook setup when using older Puppet/Ruby #581 (smortex)

v10.2.0 (2022-06-20)

Full Changelog

Implemented enhancements:

• Add Gentoo support #576 (bastelfreak)
• Allow defining mcollective policies on the r10k agent #572 (optiz0r)

Closed issues:

• Docs wrong for mcollective "deploy" command? #573
• Enhancement Request: Support ignore_branch_prefixes in config hash / seperate #556

Merged pull requests:

• Arch Linux: Disable acceptance tests for webhook #577 (bastelfreak)
• Fix mco r10k deploy command in docs to match actual behaviour #574 (optiz0r)
• puppet-lint: fix top_scope_facts warnings #569 (bastelfreak)
• Add additional curl example for environment prefixes #508 (DLeich)

v10.1.1 (2021-08-27)

Full Changelog

Fixed bugs:

• Manage unit file via systemd::unit_file #566 (bastelfreak)
• Remove explicit StandardOutput from webhook.service #564 (kenyon)

Merged pull requests:

• Allow up-to-date dependencies #567 (smortex)

v10.1.0 (2021-08-03)

Full Changelog

Implemented enhancements:

• Arch Linux: Install r10k as system package #561 (bastelfreak)

Merged pull requests:

• cleanup .fixtures.yml #557 (bastelfreak)

v10.0.0 (2021-06-21)

Full Changelog

Breaking changes:

• Migrate r10k-mcollective to choria #431
• make puppetlabs/ruby optional #553 (bastelfreak)
• Drop Puppet 5 support; require Puppet 6.1.0 or newer #549 (bastelfreak)
• Update r10k mcollective agent to work with Choria #548 (treydock)
• fix: avoid using deprecated gem options #545 (johanfleury)
• Drop EOL EL6 support #543 (ekohl)

Implemented enhancements:

• Enable Puppet 7 support #550 (bastelfreak)
• webhook config: allow access_log to be nil by using special value "stderr" #547 (kenyon)

Closed issues:

• CLI arguments --no-ri and --no-rdoc have been deprecated since Ruby 2.6.0 #544

Merged pull requests:

• puppetlabs/vcsrepo: Allow 5.x #558 (bastelfreak)
• Use a more logical example for basedir in the example code. #554 (zipkid)
• stdlib, inifile, vcsrepo: allow latest versions #552 (bastelfreak)
• Add support for FreeBSD package provider #546 (zachfi)
• Added bitbucket webhook support for pull request event #540 (magarvo)

v9.0.0 (2020-08-15)

Full Changelog

Breaking changes:

• [Issue #530] Removes dependence on puppetlabs-git #531 (chadh)

Implemented enhancements:

• webhook: support verification of X-Gitlab-Token header #529 (kenyon)

Closed issues:

• Remove dependence on old puppetlabs-git module #530
• webhook: add support for verifying X-Gitlab-Token #528

Merged pull requests:

• modulesync 3.0.0 & puppet-lint updates #533 (bastelfreak)

v8.3.0 (2020-04-30)

Full Changelog

Implemented enhancements:

• Allow puppetlabs/vcsrepo 3.x #526 (dhoppe)

Closed issues:

• vcsrepo is outdated - latest 6.x.x, requires \< 3.0.0 #525

Merged pull requests:

• Use voxpupuli-acceptance #524 (ekohl)

v8.2.0 (2020-04-06)

Full Changelog

Implemented enhancements:

• Add support for package source attribute #517 (prolixalias)

v8.1.0 (2020-04-03)

Full Changelog

Implemented enhancements:

• Change webhook systemd service type to simple #513 (alexjfisher)

Closed issues:

• webhook does not support the use of intermediate certificates #510
• Travis CI tests are currently failing on centos7-x64 #509
• Allow IPv6 #490
• generate types feature doesn't work under unprivileged user id #412
• Let /payload webhook deploy to all environments #391
• dependency on puppetlabs/gcc which is not v1 #326

Merged pull requests:

• Remove anchor resource from r10k::install::gem #519 (alexjfisher)
• Use full certificate chain for webhook #515 (mcb30)
• Fix webhook deployment on IPv6 machines #514 (mcb30)
• fix webhook generate type functionailty for non-root user #512 (vchepkov)
• allow puppetlabs/inifile 4.x #505 (bastelfreak)

v8.0.0 (2019-10-28)

Full Changelog

Breaking changes:

• Don't manage installation of git #502 (Andor)
• modulesync 2.9.0 & drop Ubuntu 14.04, add 16.04/18.04 #501 (bastelfreak)

Implemented enhancements:

• implement Archlinux support #503 (bastelfreak)
• Implement pool_size parameter #492 (baurmatt)
• Allow uppercase characters in environment names #491 (nmaludy)

Fixed bugs:

• Trim "full_name" when module name has no dash #498 (posledov)

Closed issues:

• rotated logfiles should not have executable bit set #499
• r10k, invoked by r10k::webhook, does not update the module code #496

Merged pull requests:

• r10k webhook logfiles should not be executable #500 (tuxmea)
• Add slack_icon docs to README #497 (0x6d617474)
• webhook: use the systemd service by default #494 (kenyon)

v7.0.0 (2019-06-18)

Full Changelog

Breaking changes:

• modulesync 2.7.0 and drop puppet 4 #482 (bastelfreak)

Implemented enhancements:

• (Feature) webhook should support github secrets #102
• Add support for proxy settings #487 (dhoppe)
• Adding BitBucket Server secret support. #464 (venushka)

Closed issues:

• webhook swallowing r10k error messages #472
• support the "proxy" general setting #468
• (Feature) webhook should support BitBucket server's secrets #463
• Using exec in run_command replaces process and skips notify_* calls #441
• Acceptance tests failing with permissions error: #346
• failing beaker tests #310

Merged pull requests:

• Wrap slack_icon with colons #495 (0x6d617474)
• Remove support for providers yum, zypper #489 (dhoppe)
• Allow puppetlabs/stdlib 6.x #486 (alexjfisher)
• Webhook improvements #485 (0x6d617474)
• Convert mocha to rspec-mocks #484 (dhoppe)
• Allow puppetlabs/inifile 3.x #483 (dhoppe)
• Unify docs #481 (DavidS)
• Remove Gentoo/portage related code as is it not supported. #480 (ghoneycutt)
• Acceptance tests run requests in parallel commented #470 (Dan33l)

v6.8.0 (2018-12-23)

Full Changelog

Implemented enhancements:

• Update r10k path in example prefix_command.rb #467 (alexjfisher)
• Identify branch name from BitBucket server native webhook payload #462 (venushka)

Closed issues:

• don't pin sinatra and webrick gems anymore #471

Merged pull requests:

• set webrick and sinatra versions to 'installed' #475 (kenyon)
• enable acceptance tests #469 (Dan33l)
• Remove gcc and make dependencies #465 (Rudikza)

v6.7.0 (2018-10-13)

Full Changelog

Implemented enhancements:

• Allow usage of OS r10k packages #453 (tuxmea)

Fixed bugs:

• Handle environment name normalized by r10k #452 (sapakt)

Merged pull requests:

• allow puppet 6.x #454 (bastelfreak)
• allow puppetlabs/stdlib 5.x #450 (bastelfreak)

v6.6.1 (2018-07-29)

Full Changelog

Fixed bugs:

• Notify rocketchat in rescue of deploy environments #446 (amateo)

Closed issues:

• Support BitBucket server's new webhook #436

v6.6.0 (2018-07-05)

Full Changelog

Implemented enhancements:

• provide proper default for $r10k_basedir #440 (bastelfreak)
• wrap is_pe fact in fact() method to fail safely if it isn't present #438 (bastelfreak)
• make cachedir optional #437 (Andor)

Closed issues:

• Newest r10k breaks erb parsing #420

Merged pull requests:

• Remove docker nodesets #434 (bastelfreak)
• drop EOL OSs; fix puppet version range #433 (bastelfreak)

v6.5.1 (2018-05-01)

Full Changelog

Closed issues:

• Syntax Error in voxpupuli/puppet-r10k/templates/webhook.bin.erb, line 119 #427

Merged pull requests:

• Update webhook.bin.erb #428 (rnelson0)

v6.5.0 (2018-04-25)

Full Changelog

Fixed bugs:

• Restart webhook service after package update/installation #419 (tuxmea)

Closed issues:

• undefined method `to_h' in r10k.yaml.erb #421

Merged pull requests:

• Release 6.5.0 #426 (dhollinger)
• Remove Open3 and move process forks #425 (dhollinger)
• Fixing compatibility with puppetserver/jruby. #424 (dforste)
• Minor syntax update for deploying individual environment. #423 (bschonec)
• Add supports for rocketchat #413 (amateo)

v6.4.0 (2018-03-28)

Full Changelog

Implemented enhancements:

• Using #to_yaml instead of printing each element #410 (danzilio)

Fixed bugs:

• Fix metadata for the deploy task #415 (dnlsng)

Closed issues:

• r10k deploy not working with a minimal Puppetfile #409
• Document bitbucket / stash config / hook_exe behavior #383

Merged pull requests:

• bump puppet to latest supported version 4.10.0 #417 (bastelfreak)
• Propose small spelling changes #408 (jeis2497052)
• Restart mcollective if any of the managed files change #407 (treydock)
• Implement locking for mcollective r10k to avoid multiple instances running in parallel #406 (treydock)
• Add LSB tags to the webhook init script. #405 (dickp)
• Add deploy task #400 (binford2k)
• add documentation for bitbucket webhook #384 (khaefeli)

v6.3.2 (2018-01-09)

Full Changelog

Closed issues:

• Request: Move webhook into a gem #399

Merged pull requests:

• Bump upper limit of the make dependency #403 (toepi)
• Pin webrick gem #401 (D4rkSh1t)

v6.3.1 (2017-12-07)

Full Changelog

Fixed bugs:

• syntax errors when starting the webhook #394
• Fix typo in webhook #396 (alexjfisher)

v6.3.0 (2017-11-26)

Full Changelog

Closed issues:

• /usr/local/bin/webhook PATH variable should include /usr/local/bundle/bin #373

Merged pull requests:

• docs updates, remove top level CONTRIBUTING.md #390 (wyardley)
• Generate types option #389 (dhollinger)

v6.2.0 (2017-10-11)

Full Changelog

Implemented enhancements:

• Bump upper limit of the vcsrepo and inifile dependencies #386 (dhollinger)

Merged pull requests:

• Add logging messages #385 (amateo)

v6.1.0 (2017-06-24)

Full Changelog

Closed issues:

• Clean up the log output when deleting a branch #374

Merged pull requests:

• Quote the exact JSON response for heartbeat #379 (bittner)
• Better handling for the default branch #376 (rnelson0)
• Add Troubleshooting section (logfile, heartbeat) to README #375 (bittner)
• Fix github license detection #372 (alexjfisher)

v6.0.0 (2017-05-10)

Full Changelog

Breaking changes:

• BREAKING: Fix webhook installation by pinning sinatra gem #366 (alexjfisher)

Implemented enhancements:

• Add slack_proxy_url parameter #368 (alexjfisher)

Closed issues:

• Support using webhook slack notifier through a proxy #367
• webhook gems aren't installable #365
• cachedir setting is not idempotent #351
• webhook fails to auto-start on Systemd based systems #339

Merged pull requests:

• Webhook: ability to pass extra arguments to mco #363 (nike38rus)
• use stdlib puppet facts for configuration #352 (vchepkov)
• Added /heartbeat url endpoint to webhook #272 (thebaron)

v5.0.2 (2017-04-07)

Full Changelog

Closed issues:

• Webhook not compatible with Puppet 4.10.0 #359

Merged pull requests:

• Add check to fix the ruby path on puppet 4.10.0 #360 (dhollinger)
• Webhook: ignore deploying some environments #355 (nike38rus)

v5.0.1 (2017-04-06)

Full Changelog

Closed issues:

• Migrate r10k module to Vox Pupuli #290

Merged pull requests:

• puppet-lint: fix arrow_on_right_operand_line #357 (bastelfreak)
• Create sanitize_input helper method for strings sent to run_command method. #356 (xraystyle)
• Use styleguide compliant syntax for sshkey example. #353 (kallies)
• Fix webhook slack_username parameter handling #350 (alexbrett)
• Webhook Background mode #349 (luckyraul)

v5.0.0 (2017-03-07)

Full Changelog

Closed issues:

• r10k.yaml placement is incorrect #342

Merged pull requests:

• r10k.yaml contents indentation is incorrect #345 (Kotty666)
• Update yaml location for >PE3 #343 (rnelson0)
• replace all validate functions with datatypes #341 (bastelfreak)
• Cleanup webhook use case notes; specifically PE/FOSS split. #338 (rnelson0)
• Remove support for Puppet 3 and Ruby \<2.0.0 #321 (rnelson0)
• Ensure webhook run folder exists on redhat systemd environments #283 (luisfdez)

v4.2.0 (2017-02-12)

Full Changelog

Closed issues:

• Add support for changing deploy settings #332
• Document breaking changes in CHANGELOG #306
• Status 42, OK, but it doesn't completely work #261

Merged pull requests:

• Added new 'deploy_settings' information #334 (triforce)
• Add support for changing the 'deploy' settings in the r10k.yaml configuration file #333 (triforce)
• Added Slack webhook #331 (jamtur01)
• mcollective plugin dir has changed for foss puppet 4 #330 (attachmentgenie)
• Better document soft dependency abrader/gms #327 (rnelson0)

v4.1.0 (2017-01-06)

Full Changelog

Closed issues:

• Conflict between r10k subclasses and pe_r10k due to require r10k in subclasses #323
• Re-visit hard-coded version - 1.5.1 #284
• (maint) Remove ruby 1.8.7 support from the module #231

Merged pull requests:

• (GH323) Better parameterization of root user/group from #279 #324 (rnelson0)
• Fix rubocop failures from #268 #322 (rnelson0)
• Bump minimum version dependencies (for Puppet 4) #318 (juniorsysadmin)
• Bump puppet minimum version_requirement to 3.8.7 #315 (juniorsysadmin)
• [284] Replace hard-coded version 1.5.1 with installed #308 (rnelson0)
• use puppet/make instead of deprecated croddy/make #307 (croddy)
• Lockfile to mitigate r10k race condition. #268 (binford2k)

v4.0.2 (2016-11-20)

Full Changelog

v4.0.1 (2016-11-20)

Full Changelog

Merged pull requests:

• Changelog for 4.0.1 #304 (rnelson0)

v4.0.0 (2016-11-20)

Full Changelog

Closed issues:

• 'require git' appears to be unnecessary #286
• Webhook cannot do new puppet module install #280
• mcollective agent unable to find r10k binary #275
• MCollective r10k only syncs git based modules #273
• images in README.md broken #263

Merged pull requests:

• Rename CHANGELOG.md #301 (rnelson0)
• Fixes Puppet 4 path for webhook #295 (andrewwippler)
• Update config_version.sh #291 (LinguineCode)
• Fix testing #288 (ghoneycutt)
• Duplicate certpath key #287 (LinguineCode)
• unbreak on OS where root group != 'root' #279 (buzzdeee)
• Add support for custom permissions and ownership of webhooks.yaml #278 (elconas)
• add curl example to readme #274 (jessereynolds)
• fix mcollective image #264 (mmckinst)
• Add GitHub signature #262 (ayohrling)

v3.2.0 (2015-12-16)

Full Changelog

Implemented enhancements:

• (feature) Add forge_settings param from pe_r10k #244

Closed issues:

• Agent activation fails on mcollective 2.8.6 (open source puppet 4.2) #254
• Mcollective plugins_dir is incorrect for FOSS Puppet 4 #245

Merged pull requests:

• Support for TFS/Visual Studio Git #259 (jpadams)
• Add option to lowercase environment names #256 (binford2k)
• adding server_software option to obscure the server software in use #253 (uphillian)
• postrun array requires spaces between elements #252 (mpeter)
• Grab the correct field for repo username #251 (binford2k)
• Handle tagged release events #250 (binford2k)
• configure forge settings with config class #249 (juame)
• Align webhook prefix command behavior with r10k behavior #248 (stepanstipl)
• Log when r10k not found in PATH #247 (joshbeard)
• update plugins_dir for FOSS puppet #246 (velocity303)
• create the /etc/puppetlabs/r10k directory #242 (mmckinst)
• Add single request concurrency option in r10k webhook #240 (pdaukintis)

v3.1.1 (2015-08-12)

Full Changelog

Implemented enhancements:

• (Feature) Webhook: Add timestamp to mco_output.log #215

Fixed bugs:

• stderr of the which command shows during Puppet runs on agent nodes #241

v3.1.0 (2015-08-10)

Full Changelog

Merged pull requests:

• Fix typo #238 (mcanevet)
• Automatically calculate some prefixes #236 (binford2k)
• Add the ability to respond only to certain events #235 (binford2k)
• Let rb scripts resolve what ruby to use themselves #233 (attachmentgenie)
• Making r10k webhook 2015.x compatible #229 (WhatsARanjit)

v2.8.4 (2015-08-03)

Full Changelog

v3.0.0 (2015-07-31)

Full Changelog

Implemented enhancements:

• [Feature] Support BitBucket Pull-merge in Webhook (or other git services with non-standard webhooks) #192
• Added support for BitBucket merge hooks #193 (ayohrling)

Closed issues:

• r10k and Webhook install using system ruby on CentOS 6 using Puppet 4.2.0 from "Puppet Collection 1" repo. #220
• Feature Request: add a r10k postrun hook for directory environment cache invalidation #211
• Feature Request: custom fact location of r10k binary #210
• webhook.yaml recreated on every puppet run #209
• Permissions for environments created by the webhook are incorrect #191
• move r10k.yaml to /etc/puppetlabs/r10k/r10k.yaml #190
• Webhook issues for init service without hasstatus=> false #188
• puppetconf_path is incorrect for puppet4 #187
• use of ::pe_version fails puppet run when strict_variables is enabled on foss puppet #160

Merged pull requests:

• Mco plugin directory is corrected #230 (WhatsARanjit)
• OpenBSD 5.8 switches default ruby version to 2.2, therefore #228 (buzzdeee)
• Added support for BitBucket push webhooks. #227 (dharmabruce)
• Moved r10k file and basedir #226 (WhatsARanjit)
• Provider for 2015.x uses puppet_gem instead of pe_gem #225 (WhatsARanjit)
• Puppet 4 Changes #224 (acidprime)
• Add a custom fact 'r10k_path' #222 (poikilotherm)

v2.8.3 (2015-07-17)

Full Changelog

Implemented enhancements:

• [Bug] Webhook does not support Ping event from GitHub #89

Closed issues:

• hiera_eyaml on pe 3.7+ is broken. #216
• webhook::package inclusion in r10k::webhook class #213
• systemd issues on RHEL7 #208
• systemd doesn't detect webhook as running #207

Merged pull requests:

• (METHOD-401) Fix Webhook Service on EL7 #218 (jveski)
• Changes in r10k::webhook class #214 (pdaukintis)
• Add EnvironmentFile line as optional #206 (brandonweeks)

v2.8.2 (2015-06-26)

Full Changelog

v2.8.1 (2015-06-24)

Full Changelog

Implemented enhancements:

• [Deprecation] Remove purgedirs support #84 (trlinkin)

Closed issues:

• NoMethodError when GitHub send webhook 'ping' #200
• EnvironmentFile removed from webhook unit file #197
• Webhook returns status 200 even if deploy fails #195
• webhook script should write a pidfile #171
• Change git_ssl_verify parameter name #165

Merged pull requests:

• R10k/issues/200 #201 (brandonweeks)
• Return http 500 instead of http 200 on error #199 (brandonweeks)
• Restore EnvironmentFile line as optional #198 (brandonweeks)
• 188 - Webhook segfault on status #194 (ayohrling)
• add puppet_gem provider #186 (mmckinst)
• Added webhook_group parameter lost in 0da328831ecd49c2671017e16d614dbdc1842b7c #185 (vchepkov)
• Change the way the webhook logs the r10k deploy command #184 (tampakrap)
• Include the r10k::webhook::config class in r10k::webhook #183 (tampakrap)
• improve the webhook systemd unit file #182 (tampakrap)
• Updates in the webhook config #181 (tampakrap)
• Conditionally install the webhook packages #180 (tampakrap)
• Add SUSE support in the webhook init file #179 (tampakrap)
• Remove the hardcoded hasstatus => false from the webhook service #178 (tampakrap)
• Move the $webhook::{user,group} definition to params.pp #177 (tampakrap)
• Use the webhook's systemd service file for openSUSE >= 12.1 and SLE12 #176 (tampakrap)
• webhook: include mcollective optionally #175 (tampakrap)
• Fix for #165 #174 (petems)
• Actually run as non-root, --user is for matching not chuid. #173 (robbat2)
• Gentoo & Pidfile/Init fixes #172 (robbat2)
• Fix non-ssl, abilliy to customize templates, and run with less privileges (but call r10k/mco via sudo) #170 (robbat2)
• Update stash_mco.rb #169 (rdrgmnzs)
• Fix a few typos. #167 (gabe-sky)
• Add support for OpenBSD, some noteworthy points to mention: #163 (buzzdeee)
• add logic to prevent issue with pe_version on foss puppet with strict_variables enabled #161 (smithtrevor)

v2.8.0 (2015-05-12)

Full Changelog

Closed issues:

• Webhook does not install properly in PE 3.7 #164

Merged pull requests:

• Systemd #168 (trlinkin)

v2.7.4 (2015-05-08)

Full Changelog

Closed issues:

• Webhook: Invalid yaml and unstartable service with FOSS #162

Merged pull requests:

• (162) Revert to original webhook.yaml.erb contents #166 (rnelson0)
• Update r10k gem version for v2.7.x module version #159 (aharden)

v2.7.3 (2015-04-22)

Full Changelog

v2.7.2 (2015-04-21)

Full Changelog

Closed issues:

• Gem install has the space problem regressed. #155

v2.7.1 (2015-04-20)

Full Changelog

Implemented enhancements:

• /var/log/webhook permissions not managed properly #144

Fixed bugs:

• Sinatra gem required for PE webhook? #154

Merged pull requests:

• Support of Puppet FOSS for Webhook #150 (acidprime)

v2.7.0 (2015-04-08)

Full Changelog

Implemented enhancements:

• [enhancement] mcollective agent as non-root #135

Fixed bugs:

• Module upgrade does not upgrade r10k gem #126
• Option to NOT install the r10k package #74

Merged pull requests:

• 3.x #148 (acidprime)
• fix for /var/run being mounted on tmpfs in ubuntu 14.04 #147 (spidersddd)
• Add commas in README example #143 (cmurphy)
• support for 'user' argument to su to another user when executing git and R10K #142 (GeoffWilliams)

v2.6.5 (2015-03-18)

Full Changelog

Fixed bugs:

• web hook does not work for non-mco install #139

Closed issues:

• Add Gitlab support (or add Gitlab documentation) #145

v2.6.4 (2015-02-26)

Full Changelog

Fixed bugs:

• puppet enterprise 3.7.0 webhook (no mcollective) ordering problem #138
• pre_commit ruby script fails puppet-lint if you are in the wrong working directory #130
• webhook does not normalize branch name #115

v2.6.3 (2015-02-24)

Full Changelog

Merged pull requests:

• Ensure webhook dependencies are met before running the service #134 (elyscape)

v2.6.2 (2015-02-19)

Full Changelog

Fixed bugs:

• webhook module tries to start up before the mcollective cert is installed #132

Merged pull requests:

• issue #132 making peadmin-cert.pem execute before webhook init script #133 (harrytford)
• Support puppet-lint v1 #131 (ghoneycutt)
• Travis-ci to use faster container based systems #129 (ghoneycutt)
• Support Puppet v3.7.x #128 (ghoneycutt)

v2.6.1 (2015-02-13)

Full Changelog

Merged pull requests:

• Add r10k_deploy_arguments for non-MCO deploys #125 (glarizza)

v2.6.0 (2015-02-11)

Full Changelog

Merged pull requests:

• Use 0.0.0.0 as default webhook bind address #124 (elyscape)
• Added bind_address option to webhook.yaml #123 (WhatsARanjit)
• Use zypper as default provider for openSUSE #122 (tampakrap)
• added metadata.json file for puppet versions 3.6 and older #121 (vchepkov)
• Update webhook.pp - adjusted peadmin-cert.pem #120 (aharden)

v2.5.4 (2015-02-03)

Full Changelog

Closed issues:

• mco doesn't deploy modules when using forge functionality of Puppetfile #65

v2.5.3 (2015-01-29)

Full Changelog

Closed issues:

• Dependency disappeared from forge. #116
• Ubuntu 14.04 webhook init fails #105
• r10k::webhook::config provides support for changing config file path, but the webhook script has this hardcoded #90

Merged pull requests:

• Remove +x permissions from peadmin-cert.pem #119 (elyscape)
• 105 updated webhook.ini.erb for ubuntu support #118 (MarsuperMammal)

v2.5.2 (2015-01-16)

Full Changelog

Closed issues:

• invalid_branches configuration #85
• Feature Request: Updated doc to use hieradata for sources #80

Merged pull requests:

• depend on croddy/make instead of mhuffnagle/make #117 (croddy)
• support strict_variables = true #114 (jlambert121)

v2.5.1 (2014-12-17)

Full Changelog

v2.5.0 (2014-12-17)

Full Changelog

Closed issues:

• PE 3.7.0 breaks webhook, peadmin cert name changed #110
• r10k 1.4.0 has been released #106
• Missing dependency on webhook after upgrade to PE 3.7.0 #104
• webhook should support r10k deploy module foo end point #101

Merged pull requests:

• Spelling #111 (skibum55)

v2.4.4 (2014-12-15)

Full Changelog

Closed issues:

• Webhook sends incorrect command to r10k if branch name contains / #108
• Documentation issues #99

Merged pull requests:

• Handle branch names containing slashes #109 (elyscape)
• prevent potential leakage of Default {} resources #107 (igalic)
• Documentation fixes #103 (elyscape)

v2.4.3 (2014-11-22)

Full Changelog

Closed issues:

• Versions and the Puppet Forge #100

v2.4.2 (2014-11-21)

Full Changelog

v2.4.1 (2014-11-21)

Full Changelog

v2.4.0 (2014-11-21)

Full Changelog

Closed issues:

• r10k 1.3.5 has been released #98

v2.3.4 (2014-11-20)

Full Changelog

Closed issues:

• Webhook service does not start at boot #94
• Webhook service is not refreshed when config file changes #93

Merged pull requests:

• Refresh webhook service when config file changes #91 (elyscape)

v2.3.3 (2014-11-20)

Full Changelog

Closed issues:

• Add release tag for 2.3.1 #92

Merged pull requests:

• Check for variations of $is_pe #97 (zachfi)

v2.3.2 (2014-11-20)

Full Changelog

Merged pull requests:

• Replaced references to type() function with is_string() for Puppet 3.7.x... #96 (zachfi)

v2.3.1 (2014-11-11)

Full Changelog

Closed issues:

• pe_gem install of the r10k gem is wonked #87
• mco r10k sync leave environment in a broken state #77
• Please cut new release #76
• Remove technology stack dependencies from installation process #66
• License #53
• Dependency on puppetlabs-ruby constrains use #49

Merged pull requests:

• Change install_options to undef #88 (binford2k)
• Fix tests for manage_ruby_dependency => 'include' #86 (gsarjeant)
• Allow for non-linux #83 (zachfi)
• Update CHANGELOG #82 (ghoneycutt)
• bumped version 1.3.4 #81 (kennyg)

v2.3.0 (2014-09-15)

Full Changelog

Closed issues:

• Invalid path to r10k.ddl #72
• trouble with remote ssl posts from stash to the webhook #62

Merged pull requests:

• Stash webhook helper #78 (adamcrews)
• Allow prefixing to be optional #75 (trlinkin)
• Fixes #72 #73 (robruma)
• provide a knob to flexibly manage the ruby requirement #67 (wolfspyre)

v2.2.8 (2014-08-28)

Full Changelog

Closed issues:

• r10k::include_prerun_command doesn't apply changes during the current run #69
• breaking master when I apply r10k config #64
• update params.pp to the latest r10k? #60
• Missing dependency on service mcollective #39
• Deploy single environment with Puppetfile #21

Merged pull requests:

• Fix minor lint issues #71 (adamcrews)
• change webhook exec to execute the command built previously #70 (k-f)
• Adding support for application/x-www-form-urlencoded content type webhooks #68 (robruma)
• Fix default postrun_command #63 (joshbeard)

v2.2.7 (2014-07-16)

Full Changelog

v2.2.6 (2014-07-16)

Full Changelog

v2.2.5 (2014-07-16)

Full Changelog

Closed issues:

• Deploy single environment and prerun_command #52

Merged pull requests:

• Fixup the webhook script #59 (adamcrews)
• Fix quoting to pass linting #57 (adamcrews)

v2.2.4 (2014-07-07)

Full Changelog

v2.2.3 (2014-07-07)

Full Changelog

v2.2.2 (2014-07-07)

Full Changelog

Closed issues:

• r10k::webhook Service resource pattern is too loose #54
• install fails on PE 3.2.2 due to Puppet Module Tool Bug #43

Merged pull requests:

• Removed symlinked r10k fixture/modules directory. #56 (dreilly1982)

v2.2.1 (2014-06-04)

Full Changelog

v2.1.2 (2014-06-04)

Full Changelog

Merged pull requests:

• Stop quoting all configuration options so that prefix is not always on #51 (ghoneycutt)

v2.1.1 (2014-06-03)

Full Changelog

v2.1.0 (2014-06-03)

Full Changelog

Closed issues:

• rubygems-update makes r10k non idempotent on fresh install #37
• r10k.yaml is rebuilt (md5sum differs) every Puppet run on ruby 1.8.7 #25

Merged pull requests:

• Attempted fix for issue#25 #44 (tfhartmann)

v2.0.0 (2014-06-03)

Full Changelog

Closed issues:

• does this module support Puppetfile? #40
• $r10k::params::sources doesn't exist #19

Merged pull requests:

• Support Puppet v3.6.0 #50 (ghoneycutt)
• ensure webhook initscript is ordered correctly #48 (dhgwilliam)
• Add class for postrun_command #47 (joshbeard)
• never update gem with rubygems-update #45 (pall-valmundsson)
• Add ability to specify a symlink for r10k.yaml #41 (ghoneycutt)

v1.0.2 (2014-02-19)

Full Changelog

v1.0.1 (2014-02-11)

Full Changelog

Merged pull requests:

• don't ignore basedir parameter #35 (welterde)
• update travis config, minor lint fixes #34 (jlambert121)

v1.0.0 (2014-02-09)

Full Changelog

Closed issues:

• r10k does not run sometimes #31
• Exit status 42. Is that a git not found in path error? #12

Merged pull requests:

• Update config.pp #32 (zachfi)
• add ability to include mcollective agent through main class #30 (jlambert121)
• The gem is called 'bundler' #27 (glarizza)
• Bump to 0.0.10 #26 (glarizza)
• Ability to pass package_name #24 (tampakrap)
• new URL for the make module #23 (tampakrap)
• require git only when installing via gem or bundler #22 (tampakrap)
• Add tests for Gentoo #18 (tampakrap)

v0.0.9 (2013-10-21)

Full Changelog

Closed issues:

• Ruby class is not singleton #17
• Could not find declared class ::ruby at /etc/puppet/modules/r10k/manifests/install/gem.pp:10 #16
• Deprecation warning #11
• Require Git #10

v0.0.8 (2013-10-15)

Full Changelog

Closed issues:

• Cannot install on PE3.0 #2

Merged pull requests:

• refresh mco if we install the r10k app #15 (nvalentine-puppetlabs)
• Refactor install.pp and add Gentoo Portage support #14 (tampakrap)
• Set prerun_command with inifile instead of augeas #13 (tampakrap)
• Update config.pp #9 (bxm)
• Install using bundle option added for bleeding edge features not in gem ... #8 (diginc)

v0.0.7 (2013-09-10)

Full Changelog

Merged pull requests:

• Move environemnt logic from config.pp to params.pp #7 (reidmv)
• Clean up install class #6 (reidmv)

v0.0.5 (2013-08-24)

Full Changelog

Merged pull requests:

• Manage puppet.conf's $modulepath #4 (glarizza)
• fixing comment typo #3 (fiddyspence)

v0.0.4 (2013-07-25)

Full Changelog

v0.0.3 (2013-07-25)

Full Changelog

Merged pull requests:

• Update R10k for PE #1 (glarizza)

v0.0.2 (2013-07-11)

Full Changelog

v0.0.1 (2013-06-12)

Full Changelog

* This Changelog was automatically generated by github_changelog_generator