Forge Home

unbound

Puppet Unbound management module

336,242 downloads

25,065 latest version

5.0 quality score

We run a couple of automated
scans to help you access a
module's quality. Each module is
given a score based on how well
the author has formatted their
code and documentation and
modules are also checked for
malware using VirusTotal.

Please note, the information below
is for guidance only and neither of
these methods should be considered
an endorsement by Puppet.

Version information

  • 2.5.0 (latest)
  • 2.4.1
  • 2.4.0
  • 2.0.0
  • 1.3.6
  • 1.3.5
  • 1.3.4
  • 1.3.3
  • 1.3.2
  • 1.3.1
  • 1.2.2
  • 1.2.1
  • 1.2.0
  • 1.1.8
  • 1.1.7
  • 1.1.6
  • 1.1.5
  • 1.1.4
  • 1.1.3
  • 1.1.2
  • 1.1.0
  • 1.0.0
  • 0.0.5
  • 0.0.3 (deleted)
  • 0.0.2 (deleted)
  • 0.0.1 (deleted)
released Dec 28th 2019
This version is compatible with:
  • Puppet Enterprise 2023.5.x, 2023.4.x, 2023.3.x, 2023.2.x, 2023.1.x, 2023.0.x, 2021.7.x, 2021.6.x, 2021.5.x, 2021.4.x, 2021.3.x, 2021.2.x, 2021.1.x, 2021.0.x, 2019.8.x, 2019.7.x, 2019.5.x, 2019.4.x, 2019.3.x, 2019.2.x, 2019.1.x, 2019.0.x, 2018.1.x, 2017.3.x, 2017.2.x, 2017.1.x, 2016.4.x
  • Puppet >= 4.9.0
  • , , , , , , , , , ,
This module has been deprecated by its author since Dec 16th 2020.

The author has suggested puppet-unbound as its replacement.

Start using this module

Tags: dns, unbound

Documentation

zleslie/unbound — version 2.5.0 Dec 28th 2019

Puppet powered DNS with Unbound

Puppet Forge Build Status

A puppet module for the Unbound caching resolver.

Supported Platforms

  • Debian
  • FreeBSD
  • OpenBSD
  • OS X (macports)
  • RHEL clones (with EPEL)
  • openSUSE (local repo or obs://server:dns)

Requirements

To use this module, you must be running at least Puppet 4.4. If you are on an older version of Puppet, please use a 1.x version of this module.

To use this module, you must install the puppetlabs/concat and puppetlabs/stdlib modules, either from the forge using puppet module install, or ensuring the following lines are present in your Puppetfile for an R10k deployment.

mod 'concat', :git => 'git://github.com/puppetlabs/puppetlabs-concat.git'
mod 'stdlib', :git => 'git://github.com/puppetlabs/puppetlabs-stdlib.git'

Usage

Server Setup

At minimum you should setup the interfaces to listen on and allow access to a few subnets. This will tell unbound which interfaces to listen on, and which networks to allow queries from.

class { "unbound":
  interface => ["::0","0.0.0.0"],
  access    => ["10.0.0.0/20","::1"],
}

Or, using hiera

unbound::interface:
  - '::0'
  - '0.0.0.0'
unbound::access:
  - '10.0.0.0/20'
  - '::1'

Stub Zones

These are zones for which you have an authoritative name server and want to direct queries.

unbound::stub { "lan.example.com":
  address  => '10.0.0.10',
  insecure => true,
}

unbound::stub { "0.0.10.in-addr.arpa.":
  address  => '10.0.0.10',
  insecure => true,
}

# port can be specified
unbound::stub { "0.0.10.in-addr.arpa.":
  address  => '10.0.0.10@10053',
  insecure => true,
}

# address can be an array.
# in the following case, generated conf would be as follows:
#
#   stub-host: ns1.example.com
#   stub-addr: 10.0.0.10@10053
#   stub-host: ns2.example.com
#
# note that conf will be generated in the same order provided.
unbound::stub { "10.0.10.in-addr.arpa.":
  address => [ 'ns1.example.com', '10.0.0.10@10053', 'ns2.example.com' ],
}

Or, using hiera

unbound::stub:
  '10.0.10.in-addr.arpa.':
    address:
      - 'ns1.example.com'
      - '10.0.0.10@10053'
      - 'ns2.example.com'

Unless you have DNSSEC for your private zones, they are considered insecure, noted by insecure => true.

Static DNS records

For overriding DNS record in zone.

unbound::record { 'test.example.tld':
    type    => 'A',
    content => '10.0.0.1',
    ttl     => '14400',
}

Or, using hiera

unbound::record:
  'test.example.tld':
    type: 'A'
    content: '10.0.0.1'
    ttl: '14400'

Forward Zones

Setup a forward zone with a list of address from which you should resolve queries. You can configure a forward zone with something like the following:

unbound::forward { '.':
  address => [
    '8.8.8.8',
    '8.8.4.4'
    ]
}

Or, using hiera

unbound::forward:
  '.':
    address:
      - '8.8.8.8'
      - '8.8.4.4'

This means that your server will use the Google DNS servers for any zones that it doesn't know how to reach and cache the result.

Domain Insecure

Sets domain name to be insecure, DNSSEC chain of trust is ignored towards the domain name. So a trust anchor above the domain name can not make the domain secure with a DS record, such a DS record is then ignored. Also keys from DLV are ignored for the domain. Can be given multiple times to specify multiple domains that are treated as if unsigned. If you set trust anchors for the domain they override this setting (and the domain is secured).

class {'unbound:'
  domain_insecure => ['example.com', example.org']
}

Or, using hiera

unbound::domain_insecure:
- example.com
- example.org

Local Zones

Configure a local zone. The type determines the answer to give if there is no match from local-data. The types are deny, refuse, static, transparent, redirect, nodefault, typetranspar- ent, inform, inform_deny, always_transparent, always_refuse, always_nxdomain. See local-zone in the unbound documentation for more information. You can configure a local-zone with something like the following.

class {'unbound:'
  local_zone => { '10.0.10.in-addr.arpa.' => 'nodefault'}
}

Or, using unbound::localzone

unbound::localzone { '10.0.10.in-addr.arpa.':
  type => 'nodefault'
}

Or, using hiera

unbound::local_zone:
  10.0.10.in-addr.arpa.: nodefault
  11.0.10.in-addr.arpa.: nodefault

Fine grain access-control

class { "unbound":
  interface => ["::0","0.0.0.0"],
  access    => ["10.0.0.0/20", "10.0.0.5/32 reject", "::1 allow_snoop"],
}

The access option allows to pass the action for each subnets, if the action is not provided we assume it’s 'allow'.

Adding arbitrary unbound configuration parameters

class { "unbound":
  interface          => ["::0","0.0.0.0"],
  access             => ["10.0.0.0/20","::1"],
  custom_server_conf => [ 'include: "/etc/unbound/conf.d/*.conf"' ],
}

The custom_server_conf option allows the addition of arbitrary configuration parameters to your server configuration. It expects an array, and each element gets added to the configuration file on a separate line. In the example above, we instruct Unbound to load other configuration files from a subdirectory.

Remote Control

The Unbound remote controls the use of the unbound-control utility to issue commands to the Unbound daemon process.

class { "unbound::remote":
  enable => true,
}

On some platforms this is needed to function correctly for things like service reloads.

Skipping hints download

In the case you're only building a caching forwarder and don't do iterative lookups you might not want to download the hints file containing the root nameservers because you don't need it, or you also might not be able to download it anyway because your server is firewalled which would cause the module would hang on trying to download the hints file. To skip the download set the skip_roothints_download parameter to true.

class { "unbound":
  skip_roothints_download => true,
}

More information

You can find more information about Unbound and its configuration items at unbound.net.

Contribute

Please help me make this module awesome! Send pull requests and file issues.